194 research outputs found
Achieving stationary high performance plasmas at Wendelstein 7-X
This work reports on recent results on the search for high performance plasma scenarios at the magnetically confined stellarator fusion device Wendelstein 7-X. In four new designed scenarios, the development from transient toward stationary plasmas of improved performance has been realized. In particular, a high performance duration of up to 5 s, an energy confinement time of 0.3 s, a diamagnetic energy of 1.1 MJ, a central ion temperature of 2.2 keV, and a fusion triple product of 3.4 × 10 19 m − 3 · keV · s have been achieved, and previously observed limitations of the machine have been overcome, regarding both the performance and its duration. The two main experimental techniques for stationary high performance are neutral beam injection core fueling on the one hand and the use of a magnetic field configuration with internal islands on the other hand. Two of the developed scenarios are expected to be extendable straightforward toward a duration of several tens of seconds, making use of the long pulse operation capabilities of W7-X.</p
Global and pedestal confinement and pedestal structure in dimensionless collisionality scans of low-triangularity H-mode plasmas in JET-ILW
Abstract
A dimensionless collisionality scan in low-triangularity plasmas in the Joint European Torus
with the ITER-like wall (JET-ILW) has been performed. The increase of the normalized
energy confinement (defined as the ratio between thermal energy confinement and Bohm
confinement time) with decreasing collisionality is observed. Moreover, at low collisionality,
a confinement factor H98, comparable to JET-C, is achieved. At high collisionality, the low
normalized confinement is related to a degraded pedestal stability and a reduction in the
density-profile peaking.
The increase of normalized energy confinement is due to both an increase in the pedestal
and in the core regions. The improvement in the pedestal is related to the increase of the
stability. The improvement in the core is driven by (i) the core temperature increase via
the temperature-profile stiffness and by (ii) the density-peaking increase driven by the low
collisionality.
Pedestal stability analysis performed with the ELITE (edge-localized instabilities in
tokamak equilibria) code has a reasonable qualitative agreement with the experimental results.
An improvement of the pedestal stability with decreasing collisionality is observed. The
improvement is ascribed to the reduction of the pedestal width, the increase of the bootstrap
current and the reduction of the relative shift between the positions of the pedestal density and
pedestal temperature.
The EPED1 model predictions for the pedestal pressure height are qualitatively
well correlated with the experimental results. Quantitatively, EPED1 overestimates the experimental pressure by 15–35%. In terms of the pedestal width, a correct agreement (within
10–15%) between the EPED1 and the experimental width is found at low collisionality. The
experimental pedestal width increases with collisionality. Nonetheless, an extrapolation to
low-collisionality values suggests that the width predictions from the KBM constraint are
reasonable for ITER.EURATOM 63305
Edge pedestal characterisation in high triangularity Advanced Tokamak with impurity seeding at JET
On the mechanisms governing gas penetration into a tokamak plasma during a massive gas injection
A new 1D radial fluid code, IMAGINE, is used to simulate the penetration of gas into a tokamak plasma during a massive gas injection (MGI). The main result is that the gas is in general strongly braked as it reaches the plasma, due to mechanisms related to charge exchange and (to a smaller extent) recombination. As a result, only a fraction of the gas penetrates into the plasma. Also, a shock wave is created in the gas which propagates away from the plasma, braking and compressing the incoming gas. Simulation results are quantitatively consistent, at least in terms of orders of magnitude, with experimental data for a D 2 MGI into a JET Ohmic plasma. Simulations of MGI into the background plasma surrounding a runaway electron beam show that if the background electron density is too high, the gas may not penetrate, suggesting a possible explanation for the recent results of Reux et al in JET (2015 Nucl. Fusion 55 093013)
Velocity-space sensitivity of the time-of-flight neutron spectrometer at JET
The velocity-space sensitivities of fast-ion diagnostics are often described by so-called weight functions. Recently, we formulated weight functions showing the velocity-space sensitivity of the often dominant beam-target part of neutron energy spectra. These weight functions for neutron emission spectrometry (NES) are independent of the particular NES diagnostic. Here we apply these NES weight functions to the time-of-flight spectrometer TOFOR at JET. By taking the instrumental response function of TOFOR into account, we calculate time-of-flight NES weight functions that enable us to directly determine the velocity-space sensitivity of a given part of a measured time-of-flight spectrum from TOFOR
Relationship of edge localized mode burst times with divertor flux loop signal phase in JET
A phase relationship is identified between sequential edge localized modes (ELMs) occurrence times in a set of H-mode tokamak plasmas to the voltage measured in full flux azimuthal loops in the divertor region. We focus on plasmas in the Joint European Torus where a steady H-mode is sustained over several seconds, during which ELMs are observed in the Be II emission at the divertor. The ELMs analysed arise from intrinsic ELMing, in that there is no deliberate intent to control the ELMing process by external means. We use ELM timings derived from the Be II signal to perform direct time domain analysis of the full flux loop VLD2 and VLD3 signals, which provide a high cadence global measurement proportional to the voltage induced by changes in poloidal magnetic flux. Specifically, we examine how the time interval between pairs of successive ELMs is linked to the time-evolving phase of the full flux loop signals. Each ELM produces a clear early pulse in the full flux loop signals, whose peak time is used to condition our analysis. The arrival time of the following ELM, relative to this pulse, is found to fall into one of two categories: (i) prompt ELMs, which are directly paced by the initial response seen in the flux loop signals; and (ii) all other ELMs, which occur after the initial response of the full flux loop signals has decayed in amplitude. The times at which ELMs in category (ii) occur, relative to the first ELM of the pair, are clustered at times when the instantaneous phase of the full flux loop signal is close to its value at the time of the first ELM
- …