Initiation of Failure for Masonry Subject to In-Plane Loads through Micromechanics

A micromechanical procedure is used in order to evaluate the initiation of damage and failure of masonry with in-plane loads. Masonry material is viewed as a composite with periodic microstructure and, therefore, a unit cell with suitable boundary conditions is assumed as a representative volume element of the masonry. The finite element method is used to determine the average stress on the unit cell corresponding to a given average strain prescribed on the unit cell. Finally, critical curves representing the initiation of damage and failure in both clay brick masonry and adobe masonry are provided

Core charge distribution and self assembly of columnar phases: the case of triphenylenes and azatriphenylenes

<p>Abstract</p> <p>Background</p> <p>The relation betweeen the structure of discotic molecules and columnar properties, a crucial point for the realization of new advanced materials, is still largely unknown. A paradigmatic case is that hexa-alkyl-thio substituted triphenylenes present mesogenic behavior while the corresponding azatriphenylenes, similar in shape and chemical structure, but with a different core charge distribution, do not form any liquid crystalline mesophase. This study is aimed at investigating, with the help of computer simulations techniques, the effects on phase behaviour of changes of the charge distribution in the discotic core.</p> <p>Results</p> <p>We described the shape and the pair, dispersive and electrostatic, interactions of hexa alkyl triphenylenes by uniaxial Gay-Berne discs with embedded point charges. Gay-Berne parameters were deduced by fitting the dispersive energies obtained from an atomistic molecular dynamics simulation of a small sample of hexa-octyl-thio triphenylene molecules in columnar phase, while a genetic algorithm was used to get a minimal set of point charges that properly reproduces the ab anitio electrostatic potential. We performed Monte Carlo simulations of three molecular models: the pure Gay-Berne disc, used as a reference, the Gay-Berne disc with hexa-thio triphenylene point charges, the Gay-Berne disc with hexa-thio azatriphenylene point charges. The phase diagram of the pure model evidences a rich polymorphism, with isotropic, columnar and crystalline phases at low pressure, and the appearance of nematic phase at higher pressure.</p> <p>Conclusion</p> <p>We found that the intermolecular electrostatic potential among the cores is fundamental in sta-bilizing/destabilizing columnar phases; in particular the triphenylene charge distribution stabilizes the columnar structure, while the azatriphenylene distribution suppresses its formation in favor of the nematic phase. We believe the present model could be successfully employed as the basis for coarse-grained level simulations of a wider class of triphenylene derivatives.</p

The secretory senescence in otorhinolaryngology: Principles of treatment

Atrophy or hypofunction of the salivary gland because of aging, radiotherapy or disease causes hyposalivation and impairs the quality of life of patients by compromising mastication, swallowing and speech and by leading to a loss of taste. Moreover, hyposalivation exacerbates dental caries and induces periodontal disease, and oral candidiasis. Currently, no satisfactory therapies have been established to solve salivary hypofunction. Current treatment options for atrophy or hypofunction of the salivary glands in clinical practice are only symptomatic and include saliva substitutes and parasympathetic agonists, such as pilocarpine, to stimulate salivary flow. However, parasympathomimetics have systemic side effects, so different treatment options are necessary, and research has recently focused on this. The main strategies that have been proposed to restore salivary gland atrophy and hypofunction are gene therapy by gene activation/silencing during stem cell differentiation and by the use of viral vectors, such as adenoviruses; cell-based therapy with salivary gland cells, stem cells and non-salivary gland and/ or non-epithelial cells to regenerate damaged salivary gland cells; replacement with tissue bioengineering in which organoids from pluripotent stem cells are used in the development of organ replacement regenerative therapy. Remarkable progression in this research field has been made in the last decade, but a definitive therapy for salivary gland hypofunction has not been developed due to intrinsic challenges that come with each approach. However, with research efforts in the future, a range of precision medicine therapies may become available individualized to each patient

Lidar in Space Technology Experiment correlative measurements by lidar in Potenza, southern Italy.

An intensive lidar measurement campaign was carried out in Potenza (40°36′N-15°44′E, 820 m above sea level (asl)) in conjunction with the Lidar in Space Technology Experiment (LITE) mission and primarily aimed at the validation of LITE stratospheric aerosol measurements. Potenza lidar measurements in coincidence with all five nighttime overpasses near southern Italy (September 11, 12, 17, and 18, 1994) are compared with simultaneous LITE data. Potenza lidar data appear to be highly correlated with LITE data both at 355 and 532 nm. Potenza lidar versus LITE measurements of the aerosol-scattering ratio show a correlation coefficient of 0.72–0.81 at 355 nm and 0.88–0.93 at 532 nm, with an average calibration coefficient of 0.92 ± 0.19 at 355 nm and 1.02 ± 0.07 at 532 nm. Comparisons are also made in terms of the average Angstrom coefficient, whose values are consistent with submicrometer aerosol particles. Finally, Potenza lidar measurements of the aerosol layer base and top heights, the peak aerosol-scattering ratio and peak height, as well as of the aerosol scattering ratio at the cloud base appear to be consistent with measurements performed by other ground lidar stations in Europe during the LITE campaign as well as with the LITE data

Directed ratchet transport in granular chains

Directed-ratchet transport (DRT) in a one-dimensional lattice of spherical beads, which serves as a prototype for granular chains, is investigated. We consider a system where the trajectory of the central bead is prescribed by a biharmonic forcing function with broken time-reversal symmetry. By comparing the mean integrated force of beads equidistant from the forcing bead, two distinct types of directed transport can be observed—spatial and temporal DRT. Based on the value of the frequency of the forcing function relative to the cutoff frequency, the system can be categorized by the presence and magnitude of each type of DRT. Furthermore, we investigate and quantify how varying additional parameters such as the biharmonic weight affects DRT velocity and magnitude. Finally, friction is introduced into the system and is found to significantly inhibit spatial DRT. In fact, for sufficiently low forcing frequencies, the friction may even induce a switching of the DRT direction

An Introduction to Simulation-Based Techniques for Automated Service Composition

This work is an introduction to the author's contributions to the SOC area, resulting from his PhD research activity. It focuses on the problem of automatically composing a desired service, given a set of available ones and a target specification. As for description, services are represented as finite-state transition systems, so to provide an abstract account of their behavior, seen as the set of possible conversations with external clients. In addition, the presence of a finite shared memory is considered, that services can interact with and which provides a basic form of communication. Rather than describing technical details, we offer an informal overview of the whole work, and refer the reader to the original papers, referenced throughout this work, for all details

A coalgebraic view of bar recursion and bar induction

We reformulate the bar recursion and induction principles in terms of recursive and wellfounded coalgebras. Bar induction was originally proposed by Brouwer as an axiom to recover certain classically valid theorems in a constructive setting. It is a form of induction on non- wellfounded trees satisfying certain properties. Bar recursion, introduced later by Spector, is the corresponding function defnition principle. We give a generalization of these principles, by introducing the notion of barred coalgebra: a process with a branching behaviour given by a functor, such that all possible computations terminate. Coalgebraic bar recursion is the statement that every barred coalgebra is recursive; a recursive coalgebra is one that allows defnition of functions by a coalgebra-to-algebra morphism. It is a framework to characterize valid forms of recursion for terminating functional programs. One application of the principle is the tabulation of continuous functions: Ghani, Hancock and Pattinson defned a type of wellfounded trees that represent continuous functions on streams. Bar recursion allows us to prove that every stably continuous function can be tabulated to such a tree where by stability we mean that the modulus of continuity is also continuous. Coalgebraic bar induction states that every barred coalgebra is well-founded; a wellfounded coalgebra is one that admits proof by induction

Artificial photosynthesis: photoanodes based on polyquinoid dyes onto mesoporous tin oxide surface

Dye-sensitized photoelectrochemical cells represent an appealing solution for artificial photosynthesis, aimed at the conversion of solar light into fuels or commodity chemicals. Extensive efforts have been directed towards the development of photoelectrodes combining semiconductor materials and organic dyes; the use of molecular components allows to tune the absorption and redox properties of the material. Recently, we have reported the use of a class of pentacyclic quinoid organic dyes (KuQuinone) chemisorbed onto semiconducting tin oxide as photoanodes for water oxidation. In this work, we investigate the effect of the SnO2 semiconductor thickness and morphology and of the dye-anchoring group on the photoelectrochemical performance of the electrodes. The optimized materials are mesoporous SnO2 layers with 2.5 mu m film thickness combined with a KuQuinone dye with a 3-carboxylpropyl-anchoring chain: these electrodes achieve light-harvesting efficiency of 93% at the maximum absorption wavelength of 533 nm, and photocurrent density J up to 350 mu A/cm(2) in the photoelectrochemical oxidation of ascorbate, although with a limited incident photon-to-current efficiency of 0.075%. Calculations based on the density functional theory (DFT) support the role of the reduced species of the KuQuinone dye via a proton-coupled electron transfer as the competent species involved in the electron transfer to the tin oxide semiconductor. Finally, a preliminary investigation of the photoelectrodes towards benzyl alcohol oxidation is presented, achieving photocurrent density up to 90 mu A/cm(2) in acetonitrile in the presence of N-hydroxysuccinimide and pyridine as redox mediator and base, respectively. These results support the possibility of using molecular-based materials in synthetic photoelectrochemistry.[GRAPHICS]

Diamond Detectors for the TOTEM Timing Upgrade

This paper describes the design and the performance of the timing detector developed by the TOTEM Collaboration for the Roman Pots (RPs) to measure the Time-Of-Flight (TOF) of the protons produced in central diffractive interactions at the LHC. The measurement of the TOF of the protons allows the determination of the longitudinal position of the proton interaction vertex and its association with one of the vertices reconstructed by the CMS detectors. The TOF detector is based on single crystal Chemical Vapor Deposition (scCVD) diamond plates and is designed to measure the protons TOF with about 50 ps time precision. This upgrade to the TOTEM apparatus will be used in the LHC run 2 and will tag the central diffractive events up to an interaction pileup of about 1. A dedicated fast and low noise electronics for the signal amplification has been developed. The digitization of the diamond signal is performed by sampling the waveform. After introducing the physics studies that will most profit from the addition of these new detectors, we discuss in detail the optimization and the performance of the first TOF detector installed in the LHC in November 2015.Comment: 26 pages, 18 figures, 2 tables, submitted for publication to JINS

Evidence for non-exponential elastic proton-proton differential cross-section at low |t| and sqrt(s) = 8 TeV by TOTEM

The TOTEM experiment has made a precise measurement of the elastic proton-proton differential cross-section at the centre-of-mass energy sqrt(s) = 8 TeV based on a high-statistics data sample obtained with the beta* = 90 optics. Both the statistical and systematic uncertainties remain below 1%, except for the t-independent contribution from the overall normalisation. This unprecedented precision allows to exclude a purely exponential differential cross-section in the range of four-momentum transfer squared 0.027 < |t| < 0.2 GeV^2 with a significance greater than 7 sigma. Two extended parametrisations, with quadratic and cubic polynomials in the exponent, are shown to be well compatible with the data. Using them for the differential cross-section extrapolation to t = 0, and further applying the optical theorem, yields total cross-section estimates of (101.5 +- 2.1) mb and (101.9 +- 2.1) mb, respectively, in agreement with previous TOTEM measurements.Comment: Final version published in Nuclear Physics