Structure and optical properties of polymeric carbon nitrides from atomistic simulations

Detailed understanding of the structural and photophysical properties of polymeric carbon nitride (PCN) materials is of critical importance to derive future material optimization strategies towards more desirable optical properties and more photocatalytically active materials. However, the wide range of structural motifs found in synthesized PCNs complicates atomistic simulations that rely on well defined models. Performing hybrid DFT studies, we systematically investigate formation energy trends and optical properties of PCNs as a function of dimensionality, going from molecular oligomers over periodic sheet models to stacked crystals. Thermochemical calculations that take into account vibrational enthalpy and entropy contributions predict that a mixture of structural motifs including the melon string structure, poly(heptazine imide), and g-C3N4 motifs is stable under typical synthetic conditions. The degree of lateral condensation as well as stacking can reduce the bandgap while out-of-plane corrugation of the material increases both stability and the optical gap. The key result of this work is that already small domains of strongly condensed PCN are calculated to give rise to favorable optical properties. This result reconciles conflicting literature reports indicating that the thermodynamically favorable melon motif has a too large bandgap compared to experiments, while the g-C3N4 structure, for which bandgap calculations are in better agreement with experiments, does not agree with measured chemical compositions of PCNs. Finally, we postulate a new computational model for carbon nitride materials that encompasses the most important structural motifs and shows a bandgap of ca. 2.9 eV

Structure and Optical Properties of Polymeric Carbon Nitrides from Atomistic Simulations

Detailed understanding of the structural and photophysical properties of polymeric carbon nitride (PCN) materials is of critical importance to derive future material optimization strategies towards more desirable optical properties and more photocatalytically active materials. However, the wide range of structural motifs found in synthesized PCNs complicates atomistic simulations that rely on well defined models. Performing hybrid DFT studies, we systematically investigate formation energy trends and optical properties of PCNs as a function of dimensionality, going from molecular oligomers over periodic sheet models to stacked crystals. Thermochemical calculations that take into account vibrational enthalpy and entropy contributions predict that a mixture of structural motifs including the melon string structure, poly(heptazine imide), and g-C3N4 motifs is stable under typical synthetic conditions. The degree of lateral condensation as well as stacking can reduce the bandgap while out-of-plane corrugation of the material increases both stability and the optical gap. The key result of this work is that already small domains of strongly condensed PCN are calculated to give rise to favorable optical properties. This result reconciles conflicting literature reports indicating that the thermodynamically favorable melon motif has a too large bandgap compared to experiments, while the g-C3N4 structure, for which bandgap calculations are in better agreement with experiments, does not agree with measured chemical compositions of PCNs. Finally, we postulate a new computational model for carbon nitride materials that encompasses the most important structural motifs and shows a bandgap of ca. 2.9 eV

Photodriven charge accumulation and carrier dynamics in a water‐soluble carbon nitride photocatalyst

Charge accumulation in photoactive molecules and materials holds great promise in solar energy conversion as it allows for decoupling solar‐driven charging from (dark) redox reactions. In this contribution, light‐driven charge accumulation was investigated for a recently reported novel water‐soluble carbon nitride [K,Na‐poly(heptazine imide); K,Na‐PHI] photocatalyst, which exhibits excellent activity and stability in highly selective photocatalytic oxidation of alcohols and concurrent reduction of dioxygen to H 2 O 2 under quasi‐homogeneous conditions. An excellent charge storage ability of the K,Na‐PHI material was demonstrated, showing an optimal density of accumulated electrons (32.2 μmol of electrons per gram) in the presence of 10 vol % MeOH as a sacrificial electron donor. The long‐lived electrons accumulated under anaerobic conditions as K,Na‐PHI .− radical ions were utilized in interfacial electron transfer to O 2 or methyl viologen in a subsequent dark reaction. Ultrafast time‐resolved spectroscopy was employed to reveal the kinetics of charge‐carrier recombination and methanol oxidation. Geminate recombination of electrons and holes within approximately 100 ps was followed by trap‐assisted recombination. The presence of methanol as a sacrificial electron donor accelerated the decay of the transient absorption signal when a static sample was used. This behavior was ascribed to the faster charge recombination in the presence of the radical anions generated after hole extraction. The work suggests that photodriven electron storage in the water‐soluble carbon nitride is enabled by localized trap states, and highlights the importance of the effective electron donor for creating long‐lived photo‐generated carbon nitride radicals.Taking a (very) quick look : A water‐soluble carbon nitride reveals excellent storage capacity for photogenerated charges. The photoinduced dynamics in this high‐performance water‐soluble carbon nitride photocatalyst are investigated by ultrafast time‐resolved spectroscopy

Photodoping and Fast Charge Extraction in Ionic Carbon Nitride Photoanodes

Ionic carbon nitrides based on poly(heptazine imides) (PHI) represent a vigorously studied class of materials with possible applications in photocatalysis and energy storage. Herein, for the first time, the photogenerated charge dynamics in highly stable and binder-free PHI photoanodes using in operando transient photocurrents and spectroelectrochemical photoinduced absorption measurements is studied. It is discovered that light-induced accumulation of long-lived trapped electrons within the PHI film leads to effective photodoping of the PHI film, resulting in a significant improvement of photocurrent response due to more efficient electron transport. While photodoping is previously reported for various semiconductors, it has not been shown before for carbon nitride materials. Furthermore, it is found that the extraction kinetics of untrapped electrons are remarkably fast in these PHI photoanodes, with electron extraction times (ms) comparable to those measured for commonly employed metal oxide semiconductors. These results shed light on the excellent performance of PHI photoanodes in alcohol photoreforming, including very negative photocurrent onset, outstanding fill factor, and the possibility to operate under zero-bias conditions. More generally, the here reported photodoping effect and fast electron extraction in PHI photoanodes establish a strong rationale for the use of PHI films in various applications, such as bias-free photoelectrochemistry or photobatteries. © 2021 The Authors. Advanced Functional Materials published by Wiley-VCH Gmb

Photodoping and fast charge extraction in ionic carbon nitride photoanodes

Ionic carbon nitrides based on poly(heptazine imides) (PHI) represent a vigorously studied class of materials with possible applications in photocatalysis and energy storage. Herein, for the first time, the photogenerated charge dynamics in highly stable and binder‐free PHI photoanodes using in operando transient photocurrents and spectroelectrochemical photoinduced absorption measurements is studied. It is discovered that light‐induced accumulation of long‐lived trapped electrons within the PHI film leads to effective photodoping of the PHI film, resulting in a significant improvement of photocurrent response due to more efficient electron transport. While photodoping is previously reported for various semiconductors, it has not been shown before for carbon nitride materials. Furthermore, it is found that the extraction kinetics of untrapped electrons are remarkably fast in these PHI photoanodes, with electron extraction times (ms) comparable to those measured for commonly employed metal oxide semiconductors. These results shed light on the excellent performance of PHI photoanodes in alcohol photoreforming, including very negative photocurrent onset, outstanding fill factor, and the possibility to operate under zero‐bias conditions. More generally, the here reported photodoping effect and fast electron extraction in PHI photoanodes establish a strong rationale for the use of PHI films in various applications, such as bias‐free photoelectrochemistry or photobatteries

Sol−gel processing of water‐soluble carbon nitride enables high‐performance photoanodes **

In spite of the enormous promise that polymeric carbon nitride (PCN) materials hold for various applications, the fabrication of high‐quality, binder‐free PCN films and electrodes has been a largely elusive goal to date. Here, we tackle this challenge by devising, for the first time, a water‐based sol−gel approach that enables facile preparation of thin films based on poly(heptazine imide) (PHI), a polymer belonging to the PCN family. The sol−gel process capitalizes on the use of a water‐soluble PHI precursor that allows formation of a non‐covalent hydrogel. The hydrogel can be deposited on conductive substrates, resulting in formation of mechanically stable polymeric thin layers. The resulting photoanodes exhibit unprecedented photoelectrochemical (PEC) performance in alcohol reforming and highly selective (∼100 %) conversions with very high photocurrents (>0.25 mA cm −2 under 2 sun) down to <0 V vs. RHE. This enables even effective PEC operation under zero‐bias conditions and represents the very first example of a ‘soft matter’‐based PEC system capable of bias‐free photoreforming. The robust binder‐free films derived from sol−gel processing of water‐soluble PCN thus constitute a new paradigm for high‐performance ‘soft matter’ photoelectrocatalytic systems and pave the way for further applications in which high‐quality PCN films are required.Completely unbiased : Robust binder‐free films derived from sol−gel processing of a water‐soluble polymeric carbon nitride precursor exhibit unprecedented performance in photoelectrocatalytic reforming of alcohols, including effective operation under bias‐free conditions

Water-soluble ionic carbon nitride as unconventional stabilizer for highly catalytically active ultrafine gold nanoparticles

Ultrafine metal nanoparticles (NPs) hold promise for applications in many fields, including catalysis. However, ultrasmall NPs are typically prone to aggregation, which often leads to performance losses, such as severe deactivation in catalysis. Conventional stabilization strategies (e.g., immobilization, embedding, or surface modification by capping agents) are typically only partly effective and often lead to loss of catalytic activity. Herein, a novel type of stabilizers based on water-soluble ionic (K$^+$ and Na$^+$ containing) polymeric carbon nitride (i.e., K,Na-poly(heptazine imide) = K,Na-PHI) is reported that enables effective stabilization of highly catalytically active ultrafine (size of ∼2–3 nm) gold NPs. Experimental and theoretical comparative studies using different structural units of K,Na-PHI (i.e., cyanurate, melonate, cyamelurate) indicate that the presence of functionalized heptazine moieties is crucial for the synthesis and stabilization of small Au NPs. The K,Na-PHI-stabilized Au NPs exhibit remarkable dispersibility and outstanding stability even in solutions of high ionic strength, which is ascribed to more effective charge delocalization in the large heptazine units, resulting in more effective electrostatic stabilization of Au NPs. The outstanding catalytic performance of Au NPs stabilized by K,Na-PHI is demonstrated using the selective reduction of 4-nitrophenol to 4-aminophenol by NaBH$_4$ as a model reaction, in which they outperform even the benchmark “naked” Au NPs electrostatically stabilized by excess NaBH$_4$. This work thus establishes ionic carbon nitrides (PHI) as alternative capping agents enabling effective stabilization without compromising surface catalysis, and opens up a route for further developments in utilizing PHI-based stabilizers for the synthesis of high-performance nanocatalysts

Low-Temperature Atomic Layer Deposition of Cobalt Oxide as an Effective Catalyst for Photoelectrochemical Water-Splitting Devices

We have developed a low-temperature atomic layer deposition (ALD) process for depositing crystalline and phase pure spinel cobalt oxide (Co3O4) films at 120 °C using [Co(tBu2DAD)2] and ozone as coreagent. X-ray diffraction, UV–vis spectroscopy, atomic force microscopy, field emission scanning electron microscopy, X-ray photoelectron spectroscopy, and time-of-flight elastic recoil detection analysis were performed to characterize the structure and properties of the films. The as-deposited Co3O4 films are crystalline with a low amount of impurities (<2% C and <5% H) despite low deposition temperatures. Deposition of Co3O4 onto thin TiO2 photoanodes (100 nm) for water oxidation resulted in 30% improvement of photocurrent (after 10 ALD cycles yielding small Co3O4 particles) as compared to pristine TiO2 films), and exhibited no detrimental effects on photocurrent response up to 300 deposition cycles (approximately 35 nm thick films), demonstrating the applicability of the developed ALD process for deposition of effective catalyst particles and layers in photoelectrochemical water-splitting devices.Peer reviewe