Prototipos cerámicos – diseño, computación y fabricación digital

Research in ceramic material systems at Harvard University has introduced a range of novel applications which combine digital manufacturing technologies and robotics with imaginative design and engineering methods. Prototypes showcase the new performative qualities of ceramics and the integration of this material in today’s construction culture. Work ranges from daylight control systems to structural applications and a robotic tile placement system. Emphasis is on integrating novel technologies with tried and true manufacturing methods. The paper describes two distinct studies – one on 3D print-ing of ceramics, the other on structural use of large format thin tiles.Las investigaciones de la Universidad de Harvard en sistemas de material cerámico han introducido una gama de aplicaciones novedosas que combinan tecnologías de fabricación digital y robótica con diseños imaginativos y métodos de ingeniería. Los prototipos muestran las nuevas prestaciones de la cerámica y la integración de este material en la cultura de la construcción actual. Los trabajos van desde sistemas de control de luz natural a aplicaciones estructurales y un sistema de colocación de tejas robóticas. Se hace hincapié en la integración de nuevas tecnologías con métodos de fabricación probados y reales. El documento describe dos estudios distintos: uno sobre la impresión 3D de cerámica y el otro sobre el uso estructural de baldosas delgadas de gran formato

An overview of historical and contemporary concrete shells, their construction and factors in their general disappearance

Only through understanding why concrete shells’ loss in popularity over the course of modern history can designers be equipped with the skills to create and apply this type of construction. Through modifications to design processes, construction stages, material understanding and relevant formwork improvements will architects and designers be able to meet the demands of the 21st century and beyond. To understand why concrete shells are no longer commonly built is to understand its construction process. An amorphous material, the fundamental relationship between formwork and the resultant concrete shell needs to be raised, appreciated, understood and analyzed for a holistic understanding of concrete shells. Through understanding this, issues and factors affecting concrete shells can be tackled and designed out in reviving this type of structures because they can be efficient in structural performance, economical in cost and provide high aesthetic value. This paper discusses concrete shells as an architectural solution by asking the question to what constituted their popularity and factors that led to their demise in the modern age of technological advancement, construction process and environmental concerns. This paper presents a cultural perspective and an overview of seminal, historical and contemporary concrete shells so as to bring about a renaissance of such structures in our built environment once again because of all the benefits it can offer.</p

Gridshell as Formwork: Proof of Concept for a New Technique for Constructing Thin Concrete Shells Supported by Gridshell as Formwork

This paper documents an empirical experiment conducted in August 2014 as proof of concept for a new method of constructing concrete shells. An idea initially presented by the first author in 2012, it uses redeployable gridshells onto which fabric is midstressed and concrete applied. Primarily, this system addresses key issues that led to their decline in use: construction methods/formwork systems were not reusable, nor were they easily customizable to create different shapes. Employing 27 man-hours over seven days, two concrete shells were achieved using the same reusable and reconfigurable formwork. Lightweight (0.6 kg) PVC gridshell formwork supported 106.92 kg of concrete to create a concrete shell that covered 1.11 m2 (floor area). The construction verifies a low-cost (£6.06/m2) efficiency and material utilization in the construction of very strong wide-spanning thin concrete structures. Detailed analysis of formwork behavior during construction and detailed measurements of resultant shell results prove this new method of deployable gridshells as a reusable and reconfigurable formwork to construct very strong concrete shells very quickly. Whilst the emphasis of the research focused on the construction process, the vaults were tested and sustained a failure load of 4.2 kN (4.32 times their deadweight), applied as a point load at the crown

Synthesis of phosphonate-functionalized polystyrene and poly(methyl methacrylate) particles and their kinetic behavior in miniemulsion polymerization

Phosphonate-functionalized polymer nanoparticles were synthesized by free-radical copolymerization of vinylphosphonic acid (VPA) with styrene or methyl methacrylate (MMA) using the miniemulsion technique. The influence of different parameters such as monomer and surfactant type, amount of vinylphosphonic acid on the average particle size, and size distribution was studied using dynamic light scattering and transmission electron microscopy. Depending on the amount and type of the surfactant used (ionic or non-ionic), phosphonate-functionalized particles in a size range from 102 to 312 nm can be obtained. The density of the phosphonate groups on the particle surface was higher in the case of using MMA as a basis monomer than polystyrene. The kinetic behavior of VPA copolymerization with styrene or MMA using a hydrophobic initiator was investigated by reaction calorimetry. Different kinetic curves were observed for miniemulsion (co)polymerization of styrene- and MMA-based nanoparticles indicating different nucleation mechanisms

Reciprocal regulation of glycine-rich RNA-binding proteins via an interlocked feedback loop coupling alternative splicing to nonsense-mediated decay in Arabidopsis

The Arabidopsis RNA-binding protein AtGRP8 undergoes negative autoregulation at the post-transcriptional level. An elevated AtGRP8 protein level promotes the use of a cryptic 5′ splice site to generate an alternatively spliced transcript, as_AtGRP8, retaining the 5′ half of the intron with a premature termination codon. In mutants defective in nonsense-mediated decay (NMD) abundance of as_AtGRP8 but not its pre-mRNA is elevated, indicating that as_AtGRP8 is a direct NMD target, thus limiting the production of functional AtGRP8 protein. In addition to its own pre-mRNA, AtGRP8 negatively regulates the AtGRP7 transcript through promoting the formation of the equivalent alternatively spliced as_AtGRP7 transcript, leading to a decrease in AtGRP7 abundance. Recombinant AtGRP8 binds to its own and the AtGRP7 pre-mRNA, suggesting that this interaction is relevant for the splicing decision in vivo. AtGRP7 itself is part of a negative autoregulatory circuit that influences circadian oscillations of its own and the AtGRP8 transcript through alternative splicing linked to NMD. Thus, we identify an interlocked feedback loop through which two RNA-binding proteins autoregulate and reciprocally crossregulate by coupling unproductive splicing to NMD. A high degree of evolutionary sequence conservation in the introns retained in as_AtGRP8 or as_AtGRP7 points to an important function of these sequences

Tandem synthesis of alternating polyesters from renewable resources

The vast majority of commodity materials are obtained from petrochemical feedstocks. These resources will plausibly be depleted within the next 100 years, and the peak in global oil production is estimated to occur within the next few decades. In this regard, biomass represents an abundant carbon-neutral renewable resource for the production of polymers. Here we report a new strategy, based on tandem catalysis, to obtain renewable materials. Commercially available complexes are found to be efficient catalysts for alternating polyesters from the cyclization of dicarboxylic acids followed by alternating copolymerization of the resulting anhydrides with epoxides. This operationally simple method is an attractive strategy for the production of new biodegradable polyesters

Bio-Based Succinate Production from Arundo donax Hydrolysate with the New Natural Succinic Acid-Producing Strain Basfia succiniciproducens BPP7

n/