Pristine levels of suspended sediment in large German river channels during the Anthropocene?

Suspended sediment is an integral part of riverine transport and functioning that has been strongly altered during the Anthropocene due to the overwhelming human pressure on soils, sediments, and the water cycle. Understanding the controls of changing suspended sediment in rivers is therefore vital for effective management strategies. Here we present results from a trend analysis of suspended sediments covering 62 monitoring stations along the German waterways (catchment sizes range between 2000 and 160 000 km2) with more than 440 000 water samples taken between 1990 and 2010. Based on daily monitoring of suspended sediment concentration (SSC), we found significant declines in mean annual SSC and annual suspended sediment loads (SSLs) at 49 of 62 monitoring stations totaling −0.92 mg L−1 yr−1. At some stations decreases during the 20 years represent up to 50 % of the long-term average SSC. Significant decreases in SSC are associated with declining SSL despite an increase in sheet and rill erosion by almost 150 % derived from modeling due to changes in land use and management as well as rainfall erosivity. The contemporary suspended sediment loads of the Rhine at the German–Dutch border are approaching the natural base level of ∼1 Mt yr−1, which was reached by the Rhine during the mid-Holocene when the suspended sediment load was adjusted to the Holocene climatic conditions and before the onset of increased loads due to human-induced land use changes in the Rhine catchment. At this point we can only speculate regarding potential reasons for a decline in sediment transport in larger rivers despite erosion increase. We argue that increased sediment retention in upstream headwaters is presumably the major reason for declining SSC in the large river channels studied.</p

Short-term associations between particle oxidative potential and daily mortality and hospital admissions in London.

BACKGROUND: Particulate matter (PM) from traffic and other sources has been associated with adverse health effects. One unifying theory is that PM, whatever its source, acts on the human body via its capacity to cause damaging oxidation reactions related to its content of pro-oxidants components. Few epidemiological studies have investigated particle oxidative potential (OP) and health. We conducted a time series analysis to assess associations between daily particle OP measures and numbers of deaths and hospital admissions for cardiovascular and respiratory diseases. METHODS: During 2011 and 2012 particles with an aerodynamic diameter less than 2.5 and 10μm (PM2.5 and PM10 respectively) were collected daily on Partisol filters located at an urban background monitoring station in Central London. Particulate OP was assessed based on the capacity of the particles to oxidize ascorbate (OP(AA)) and glutathione (OP(GSH)) from a simple chemical model reflecting the antioxidant composition of human respiratory tract lining fluid. Particulate OP, expressed as % loss of antioxidant per μg of PM, was then multiplied by the daily concentrations of PM to derive the daily OP of PM mass concentrations (% loss per m(3)). Daily numbers of deaths and age- and cause-specific hospital admissions in London were obtained from national registries. Poisson regression accounting for seasonality and meteorology was used to estimate the percentage change in risk of death or admission associated with an interquartile increment in particle OP. RESULTS: We found little evidence for adverse associations between OP(AA) and OP(GSH) and mortality. Associations with cardiovascular admissions were generally positive in younger adults and negative in older adults with confidence intervals including 0%. For respiratory admissions there was a trend, from positive to negative associations, with increasing age although confidence intervals generally included 0%. CONCLUSIONS: Our study, the first to analyse daily particle OP measures and mortality and admissions in a large population over two years, found little evidence to support the hypothesis that short-term exposure to particle OP is associated with adverse health effects. Further studies with improved exposure assessment and longer time series are required to confirm or reject the role of particle OP in triggering exacerbations of disease

A Four-Way Comparison of Cardiac Function with Normobaric Normoxia, Normobaric Hypoxia, Hypobaric Hypoxia and Genuine High Altitude.

There has been considerable debate as to whether different modalities of simulated hypoxia induce similar cardiac responses.This was a prospective observational study of 14 healthy subjects aged 22-35 years. Echocardiography was performed at rest and at 15 and 120 minutes following two hours exercise under normobaric normoxia (NN) and under similar PiO2 following genuine high altitude (GHA) at 3,375m, normobaric hypoxia (NH) and hypobaric hypoxia (HH) to simulate the equivalent hypoxic stimulus to GHA.All 14 subjects completed the experiment at GHA, 11 at NN, 12 under NH, and 6 under HH. The four groups were similar in age, sex and baseline demographics. At baseline rest right ventricular (RV) systolic pressure (RVSP, p = 0.0002), pulmonary vascular resistance (p = 0.0002) and acute mountain sickness (AMS) scores were higher and the SpO2 lower (p<0.0001) among all three hypoxic groups (GHA, NH and HH) compared with NN. At both 15 minutes and 120 minutes post exercise, AMS scores, Cardiac output, septal S', lateral S', tricuspid S' and A' velocities and RVSP were higher and SpO2 lower with all forms of hypoxia compared with NN. On post-test analysis, among the three hypoxia groups, SpO2 was lower at baseline and 15 minutes post exercise with GHA (89.3±3.4% and 89.3±2.2%) and HH (89.0±3.1 and (89.8±5.0) compared with NH (92.9±1.7 and 93.6±2.5%). The RV Myocardial Performance (Tei) Index and RVSP were significantly higher with HH than NH at 15 and 120 minutes post exercise respectively and tricuspid A' was higher with GHA compared with NH at 15 minutes post exercise.GHA, NH and HH produce similar cardiac adaptations over short duration rest despite lower SpO2 levels with GHA and HH compared with NH. Notable differences emerge following exercise in SpO2, RVSP and RV cardiac function

Sur une méthode altimétrique d'analyse morphologique appliquée à la Bretagne péninsulaire

National audienc

Schnelle Entfernungsmessung für Laserscanner

This contribution describes the principle of distance measurement by means of a modulated laser beam and phase detection. The most critical impacts on accuracy and reliability like noise, modal structure of the laser, and crosstalk are qualified and quantified. Counteractive measures to reduce their influence are shown. The realized distance measuring module enables to measure distances in a some ten meter range with frequencies up to 1 MHz. Some results of a laser scanner for clearance measurement of railway lines are shown

Novel geometry for a high speed outdoor laser scanning system

Today, the phase shifting technique is still the fastest and most accurate measurement method for laser scanners in the meter and some 10 meters range. A major handicap for outdoor applications such as railway measurement systems is the influence of optical cross talk caused by pollution of the optical surfaces. This effect is closely linked to the multi target response of phase shifting systems which is analyzed quantitatively. It is shown that optical cross talk is a major cause for nonlinearities when dark objects are measured. To overcome this disadvantage a sealed cover with light traps was designed for a 350 degree scanner to protect the most critical surface of the scan mirror and to absorb the stray light from the polluted outer surfaces. The sampling rate of this system can be doubled without loss of measurement accuracy by using a new scan geometry with two fibre coupled measurement heads on each end of a hollow scan axis with a double sided scan mirror

Influence of Luting Materials on the Retention of Cemented Implant-Supported Crowns: An In Vitro Study

The retention force of cemented crowns on implant abutments with various luting materials was evaluated. Cobalt&ndash;chromium crowns were cemented onto tapered titanium abutments (Camlog) with eugenol-free temporary cement (RelyX TempBond NE), composite-based temporary cement (Bifix Temp), zinc phosphate cement (Harvard Cement), glass-ionomer cements (Meron, Fuji I), and resin-modified glass-ionomer cements (Fuji II, Fuji Plus, Ketac Cem Plus). Specimen aging via hydrostress was performed in artificial saliva at 37 &deg;C for 14 days (S1), followed by hydrothermal stress with thermocycling (S2). The crowns were removed, and the force was recorded (T1). Subsequently, the crowns were recemented, aged, and removed, and the force was recorded (T2, T3). The retention forces differences were statistically significant according to the storage conditions at T1 (p = 0.002) and T3 (p = 0.0002). After aging (S1), Ketac Cem Plus had the highest retention force median value difference (T3 versus T1) (&minus;773 N), whereas RelyX TempBond NE had the lowest (&minus;146 N). After aging (S2), Meron had the highest retention force median value difference (&minus;783 N), whereas RelyX TempBond NE had the lowest (&minus;168 N). Recementation decreased the retention force of the implant-supported cobalt&ndash;chromium crowns cemented and recemented with the same luting materials. Luting materials (at T1) and aging conditions significantly impacted the retention force

Hybrid assembled micro scanner array with large aperture and their system integration for a 3D ToF laser camera

This paper presents a large aperture micro scanning mirror (MSM) array especially developed for the novel 3D-laser camera Fovea3D. This 3D-camera uses a pulsed ToF technique with 1MVoxel distance measuring rate and targets for a large measurement range of 30 ... 100m and FOV of 120 degrees x60 degrees at video like frame rates. To guarantee a large reception aperture of >= 20mm, large FOV and 3200 Hz bi-directional scanning frequency at the same time, a hybrid assembled MSM array was developed consisting of 22 reception mirrors and a separate sending mirror. A hybrid assembly of frequency selected scanner elements and a driving in parametric resonance were chosen to enable a fully synchronized operation of all scanner elements. For position feedback piezo-resistive position sensors are integrated on each MEMS chip. The paper discusses details of the MEMS system integration including the synchronized operation of multiple scanning elements