71 research outputs found
Hemocompatibility of stent materials: alterations in electrical parameters of erythrocyte membranes
A Basoli1, C Cametti2, F Ginnari Satriani2, P Mariani3, P Severino31Department of Surgery, "P Stefanini," University of Rome "La Sapienza," Rome, Italy; 2Department of Physics, University of Rome "La Sapienza," Rome Italy; 3Department of Internal Medicine, University of Rome "La Sapienza," Rome, ItalyBackground: It is presently unknown if stents used in the correction of artery stenosis are fully hemocompatible or if their implantation causes alterations at the level of the plasma membrane in red blood cells.Methods: We addressed this important issue by measuring the passive electrical properties of the erythrocyte membrane before and after stent insertion by means of dielectric relaxation spectroscopy in the radiowave frequency range in a series of patients who were undergoing standard surgical treatment of arterial disease.Results: Our findings provide evidence that full hemocompatibility of stents has not yet been reached, and that there are some measurable alterations in the passive electrical behavior of the red blood cell membrane induced by the presence of the stent.Conclusion: It is possible that these changes do not have any physiological significance and simply reflect the intrinsic variability of biological samples. However, caution is urged, and the technique we describe here should be considered when investigating the hemocompatibility of a medical device at a cell membrane level.Keywords: hemocompatibility, stent, arterial disease, cell membran
Spin-coated La0.8Sr0.2Ga0.8Mg0.2O3-δ Electrolyte on Infiltrated Anodes for Direct Methane Fuel Cells
Dense micrometric La0.8Sr0.2Ga0.8Mg0.2O3-δ (LSGM) films were
deposited by spin-coating on porous LSGM scaffolds characterized
by homogeneous pore structure. Porous anodes were infiltrated
with aqueous nickel and nickel/copper nitrate solutions, dried and
fired at 700°C. Homogeneous metal coating with proper
interconnection was observed by SEM, chemical stability was
confirmed by XRD, and electrical characterization of anodic
substrates was performed. Catalytic activity of different anodes
was evaluated ex-situ in a quartz micro-reactor fed with CH4:CO2
mixtureat range 650 and 700°C. To investigate the redox
properties of the metallic phases, the anodic substrates were
subjected to redox ageing cycles and characterized by H2-TPR
Gellan hydrogel as a powerful tool in paper cleaning process: a detailed study
Hypothesis: Wet cleaning of ancient papers is one of the most critical steps during a conservation treatment. It is used to improve the optical qualities of a graphic work and remove dust and by-products resulting from cellulose degradation. Nevertheless, washing treatment usually involves a substantial impact on the original morphological structure of paper and can sometimes be dangerous for water sensitive inks and pigments. Experiments: The use of rigid hydrogel of Gellan gum as an alternative paper cleaning treatment is developed. The application of a rigid hydrogel minimizes damages caused by the use of water, and therefore is much more respectful for the original integrity of ancient paper. Findings: Gellan hydrogel has been used to clean paper samples belonging to different centuries (from XVI to XIX) and therefore, characterized by a different story in terms of degradation condition and paper composition. Several techniques, such as high-performance liquid chromatography, Fourier transform infrared spectroscopy, scanning electron microscopy and pH measurements, has been employed to assess the effectiveness and safety of the proposed cleaning method
Mechanical Stimulation of Fibroblasts by Extracorporeal Shock Waves: Modulation of Cell Activation and Proliferation Through a Transient Proinflammatory Milieu
Extracorporeal shock waves (ESWTs) are \u201cmechanical\u201d waves, widely used in regenerative medicine, including soft tissue wound repair. Although already being used in the clinical practice, the mechanism of action underlying their biological activities is still not fully understood. In the present paper we tried to elucidate whether a proinflammatory effect may contribute to the regenerative potential of shock waves treatment. For this purpose, we exposed human foreskin fibroblasts (HFF1 cells) to an ESWT treatment (100 pulses using energy flux densities of 0.19 mJ/mm2 at 3 Hz), followed by cell analyses after 5 min, up to 48 h. We then evaluated cell proliferation, reactive oxygen species generation, ATP release, and cytokine production. Cells cultured in the presence of lipopolysaccharide (LPS), to induce inflammation, were used as a positive control, indicating that LPS-mediated induction of a proinflammatory pattern in HFF1 increased their proliferation. Here, we provide evidence that ESWTs affected fibroblast proliferation through the overexpression of selected cytokines involved in the establishment of a proinflammatory program, superimposable to what was observed in LPS-treated cells. The possibility that inflammatory circuits can be modulated by ESWT mechanotransduction may disclose novel hypothesis on their biological underpinning and expand the fields of their biomedical application
The Gas Sensing Properties of Porphyrins-coated Laterally Grown ZnO Nanorods
AbstractPorphyrins coated ZnO is an interesting material where the exposure to light and gas may cooperate to modulate the respective sensitivities. In this work, the gas sensing properties of porphyrins functionalized laterally grown ZnO nanorods are introduced. The porphyrin layer incompletely coats the semiconductor surface in order to keep both ZnO and porphyrins in contact with analyte. It is known that UV light may prompt the chemical sensitivity of ZnO replacing the high temperature condition. Here we demonstrate that because of the photo-injection of electrons from porphyrin to the ZnO, the same impact could be acquired with visible light
Meta-analysis of thyroidectomy with ultrasonic dissector versus conventional clamp and tie
<p>Abstract</p> <p>Background</p> <p>We conducted a systematic review to evaluate the role of Ultrasonic dissector (UAS) versus conventional clamp and tie in thyroidectomy.</p> <p>Materials and methods</p> <p>We searched for all published RCT in into electronic databases. To be included in the analysis, the studies had to compare thyroidectomy with UAS versus conventional vessel ligation and tight (conventional technique = CT). The following outcomes were used to compare the total thyroidectomy group with UAS versus CT group: operative duration, operative blood loss, overall drainage volume during the first 24 hours, transiet laryngeal nerve palsy, permanent laryngeal nerve palsy, transiet hypocalcaemia and permanent hypocalcaemia.</p> <p>Results</p> <p>There are currently 7 RCT on this issue to compare thyroidectomy with UAS versus CT. From the analysis of these studies it was possible to confront 608 cases: 303 undergoing to thyroidectomy with UAS versus 305 that were treated with CT. Actually, it was shown a relevant advantage of cost-effectiveness in patients treated with UAS; there is a statistically significant reduction of the operative duration (weighted mean difference [WMD], -18.74 minutes; 95% confidence interval [CI], (-26.97 to -10.52 minutes) (P = 0.00001), intraoperative blood loss (WMD, -60.10 mL; 95% CI, -117.04 to 3.16 mL) (P = 0.04) and overall drainage volume (WMD, -35.30 mL; 95% CI, -49.24 to 21.36 mL) (P = 0.00001) in the patients underwent thyroidectomy with UAS. Although the analysis showed that the patients who were treated with USA presented more favourable results in incidence of post-operative complications (transient laryngeal nerve palsy: P = 0.11; permanent laryngeal nerve palsy: not estimable; transient hypocalcaemia: P = 0.24; permanent hypocalcaemia: P = 0.45), these data didn't present statistical relevance.</p> <p>Conclusion</p> <p>This meta-analysis shown a relevant advantage only in terms of cost-effectiveness in patients treated with UAS; it is subsequent to statistically significant reduction of operation duration, intraoperative blood loss and of overall drainage volume during the first 24 hours. Although the analysis showed that the patients who were treated with UAS presented more favourable results in incidence of post-operative complications (transiet laryngeal nerve palsy; transiet hypocalcaemia and permanent hypocalcaemia), these data didn't present statistical relevance.</p
Definitions, pathophysiology, and epidemiology of acute cholangitis and cholecystitis: Tokyo Guidelines
This article discusses the definitions, pathophysiology, and epidemiology of acute cholangitis and cholecystitis. Acute cholangitis and cholecystitis mostly originate from stones in the bile ducts and gallbladder. Acute cholecystitis also has other causes, such as ischemia; chemicals that enter biliary secretions; motility disorders associated with drugs; infections with microorganisms, protozoa, and parasites; collagen disease; and allergic reactions. Acute acalculous cholecystitis is associated with a recent operation, trauma, burns, multisystem organ failure, and parenteral nutrition. Factors associated with the onset of cholelithiasis include obesity, age, and drugs such as oral contraceptives. The reported mortality of less than 10% for acute cholecystitis gives an impression that it is not a fatal disease, except for the elderly and/or patients with acalculous disease. However, there are reports of high mortality for cholangitis, although the mortality differs greatly depending on the year of the report and the severity of the disease. Even reports published in and after the 1980s indicate high mortality, ranging from 10% to 30% in the patients, with multiorgan failure as a major cause of death. Because many of the reports on acute cholecystitis and cholangitis use different standards, comparisons are difficult. Variations in treatment and risk factors influencing the mortality rates indicate the necessity for standardized diagnostic, treatment, and severity assessment criteria
Combining responsiveness and durability in liquid crystal-functionalised electrospun fibres with crosslinked sheath
Responsive functional composite fibre mats that are mechanically stable and impervious to water exposure are produced by coaxial electrospinning of thermotropic liquid crystal (LC) core inside a water-based solution of poly(vinyl alcohol) (PVA) and poly(acrylic acid) (PAA) forming the sheath. Because thermotropic LCs usually cannot be spun inside water-based solutions due to excessive interfacial tension (Formula presented.), a n enabling step is the addition of ethanol or dioxane to the LC as a co-solvent compatible with both core and sheath fluids. This reduces (Formula presented.) sufficiently that coaxial jet spinning is possible. After spinning, thermal cross-linking of the PVA+PAA sheath yields LC-functionalised fibres that can be manipulated by hand and remain intact even upon full immersion in water. The LC core retains its behaviour, nematics showing well-aligned birefringence and transitioning to isotropic upon heating above the clearing point, and cholesterics showing selective reflection which is even enhanced upon water immersion due to the removal of sheath scattering. Our results pave the way to producing LC-functionalised responsive fibre mats using durable polymer sheaths, thereby enabling numerous innovative applications in wearable technology, and they also open new opportunities to study LCs in confinement, without visible impact of the container walls
- …