584 research outputs found
Interannual variation in summer N2O concentration in the hypoxic region of the northern Gulf of Mexico, 1985â2007
Microbial nitrous oxide (N2O) production in the ocean is enhanced under low-oxygen (O2) conditions. This is especially important in the context of increasing hypoxia (i.e., oceanic zones with extremely reduced O2 concentrations).
Here, we present a study on the interannual variation in summertime nitrous oxide (N2O) concentrations in the bottom waters of the northern Gulf of Mexico (nGOM), which is well-known as the site of the second largest seasonally occurring hypoxic zone worldwide. To this end we developed a simple model that computes bottom-water N2O concentrations with a tri-linear 1N2O/O2 relationship based on water-column O2 concentrations, derived from summer (July) TexasâLouisiana shelf-wide hydrographic data between 1985 and 2007. 1N2O (i.e., excess N2O) was computed including nitrification and denitrification as the major microbial production and consumption pathways of N2O. The mean modeled bottom-water N2O concentration for July in the nGOM was 14.5±2.3 nmol Lâ1 (min: 11.0±4.5 nmol Lâ1 in 2000 and max: 20.6±11.3 nmol Lâ1 in 2002). The mean bottom-water N2O concentrations were significantly correlated with the areal extent of hypoxia in the nGOM. Our modeling analysis indicates that the nGOM is a persistent summer source of N2O, and nitrification is dominating N2O production in this region. Based on the ongoing increase in the areal extent of hypoxia in the nGOM, we conclude that N2O production (and its subsequent emissions)from this environmentally stressed region will probably continue to increase into the future
Nitrous oxide emissions from the Arabian Sea: A synthesis
We computed high-resolution (1Âș latitude x 1Âș longitude) seasonal and annual nitrous oxide (N2O) concentration fields for the Arabian Sea surface layer using a database containing more than 2400 values measured between December 1977 and July 1997. N2O concentrations are highest during the southwest (SW) monsoon along the southern Indian continental shelf. Annual emissions range from 0.33 to 0.70 Tg N2O and are dominated by fluxes from coastal regions during the SW and northeast monsoons. Our revised estimate for the annual N2O flux from the Arabian Sea is much more tightly constrained than the previous consensus derived using averaged in-situ data from a smaller number of studies. However, the tendency to focus on measurements in locally restricted features in combination with insufficient seasonal data coverage leads to considerable uncertainties of the concentration fields and thus in the flux estimates, especially in the coastal zones of the northern and eastern Arabian Sea. The overall mean relative error of the annual N2O emissions from the Arabian Sea was estimated to be at least 65%
Nitrous oxide emissions from the Arabian Sea: A synthesis
We computed high-resolution (1Âș latitude x 1Âș longitude) seasonal and annual nitrous oxide (N<sub>2</sub>O) concentration fields for the Arabian Sea surface layer using a database containing more than 2400 values measured between December 1977 and July 1997. N<sub>2</sub>O concentrations are highest during the southwest (SW) monsoon along the southern Indian continental shelf. Annual emissions range from 0.33 to 0.70 Tg N<sub>2</sub>O and are dominated by fluxes from coastal regions during the SW and northeast monsoons. Our revised estimate for the annual N<sub>2</sub>O flux from the Arabian Sea is much more tightly constrained than the previous consensus derived using averaged in-situ data from a smaller number of studies. However, the tendency to focus on measurements in locally restricted features in combination with insufficient seasonal data coverage leads to considerable uncertainties of the concentration fields and thus in the flux estimates, especially in the coastal zones of the northern and eastern Arabian Sea. The overall mean relative error of the annual N<sub>2</sub>O emissions from the Arabian Sea was estimated to be at least 65%
Validating CFD predictions of flow over an escarpment using ground-based and airborne measurement devices
Micrometeorological observations from a tower, an eddy-covariance (EC) station and an unmanned aircraft system (UAS) at the WINSENT test-site are used to validate a computational fluid dynamics (CFD) model, driven by a mesoscale model. The observation site is characterised by a forested escarpment in a complex terrain. A two-day measurement campaign with a flow almost perpendicular to the escarpment is analysed. The first day is dominated by high wind speeds, while, on the second one, calm wind conditions are present. Despite some minor differences, the flow structure, analysed in terms of horizontal wind speeds, wind direction and inclination angles shows similarities for both days. A real-time strategy is used for the CFD validation with the UAS measurement, where the model follows spatially and temporally the aircraft. This strategy has proved to be successful. Stability indices such as the potential temperature and the bulk Richardson number are calculated to diagnose atmospheric boundary layer (ABL) characteristics up to the highest flight level. The calculated bulk Richardson values indicate a dynamically unstable region behind the escarpment and near the ground for both days. At higher altitudes, the ABL is returning to a near neutral state. The same characteristics are found in the model but only for the first day. The second day, where shear instabilities are more dominant, is not well simulated. UAS proves its great value for sensing the flow over complex terrains at high altitudes and we demonstrate the usefulness of UAS for validating and improving models
Crossover from non-thermal to thermal photoluminescence from metals excited by ultrashort light pulses
Photoluminescence from metal nanostructures following intense ultrashort
illumination is a fundamental aspect of light-matter interactions.
Surprisingly, many of its basic characteristics are under ongoing debate. Here,
we resolve the majority of these debates by providing the most complete
theoretical framework to date that describes this phenomenon, and support it by
experimental confirmation. Specifically, we identify aspects of the emission
that are characteristic to either non-thermal or thermal emission, in
particular, differences in the spectral and electric field-dependence of these
two contributions to the emission. Overall, non-thermal emission is
characteristic of the early stages of light emission, while the later stages
show thermal characteristics. The former dominate only for moderately high
illumination intensities for which the electron temperature reached after
thermalization is close to room temperature. The theory is then complemented by
experimental evidence that demonstrates the novel aspects of our
considerations
Dissolved methane during hypoxic events at the Boknis Eck Time Series Station (Eckernförde Bay, SW Baltic Sea)
Dissolved CH4 was measured in the water column at the Boknis Eck (BE) time series station in the Eckernförde Bay (SW Baltic Sea) on a monthly basis from June 2006 to November 2008. The water column at BE was always supersaturated with CH4 and, therefore, CH4 was released to the atmosphere throughout the sampling period: the mean CH4 surface (1 m) saturation at BE was 554±317%. A pulse of enhanced CH4 emissions occurs when the CH4 accumulation in the hypoxic bottom layer during summer is terminated in late summer/autumn. We did not detect a straightforward relationship between periods of enhanced CH4 in the bottom layer and hypoxic events at BE: the sedimentary release of CH4 seemed to be mainly triggered by sedimenting organic material from phytoplankton blooms. We conclude that future CH4 emissions from BE will be determined by the intensity of phytoplankton blooms, which in turn will be influenced by eutrophication. However, hypoxic events seem to have only a modulating effect on the enhancement of sedimentary methanogenesis and the subsequent release of CH4 to the water column
Global oceanic production of nitrous oxide
We use transient time distributions calculated from tracer data together with in situ measurements of nitrous oxide (N2O) to estimate the concentration of biologically produced N2O and N2O production rates in the ocean on a global scale. Our approach to estimate the N2O production rates integrates the effects of potentially varying production and decomposition mechanisms along the transport path of a water mass.We estimate that the oceanic N2O production is dominated by nitrification with a contribution of only approximately 7 per cent by denitrification. This indicates that previously used approaches have overestimated the contribution by denitrification. Shelf areas may account for only a negligible fraction of the global production; however, estuarine sources and coastal upwelling of N2O are not taken into account in our study. The largest amount of subsurface N2O is produced in the upper 500 m of the water column. The estimated global annual subsurface N2O production ranges from 3.1+/-0.9 to 3.4+/-0.9 Tg N yr^-1. This is in agreement with estimates of the global N2O emissions to the atmosphere and indicates that a N2O source in the mixed layer is unlikely. The potential future development of the oceanic N2O source in view of the ongoing changes of the ocean environment (deoxygenation, warming, eutrophication and acidification) is discussed
Nitrous oxide dynamics in low oxygen regions of the Pacific: insights from the MEMENTO database
The Eastern Tropical Pacific (ETP) is believed to be one of the largest marine sources of the greenhouse gas nitrous oxide N2O). Future N2Oemissions from the ETP are highly uncertain because oxygen minimum zones are expected to expand, affecting both regional production and consumption of N2O. Here we assess three primary uncertainties in how N2O may respond to changing O2 levels: (1) the relationship between N2O production and O2 (is it linear or exponential at low O2 concentrations?), (2) the cutoff point at which net N2O production switches to net N2O consumption (uncertainties in this parameterization can lead to differences in model ETP N2O concentrations of more than 20%), and (3) the rate of net N2O consumption at low O2. Based on the MEMENTO database, which is the largest N2O dataset currently available, we find that N2O production in the ETP increases linearly rather than exponentially with decreasing O2. Additionally, net N2O consumption switches to net N2O production at ~ 10 ÎŒM O2, a value in line with recent studies that suggest consumption occurs on a larger scale than previously thought. N2O consumption is on the order of 0.129 mmol N2O mâ3 yrâ1 in the PeruâChile Undercurrent. Based on these findings, it appears that recent studies substantially overestimated N2O production in the ETP. In light of expected deoxygenation, future N2O production is still uncertain, but due to higher-than-expected consumption levels, it is possible that N2Oconcentrations may decrease rather than increase as oxygen minimum zones expand
BubR1 promotes Bub3-dependent APC/C inhibition during Spindle Assembly Checkpoint signaling.
The spindle assembly checkpoint (SAC) prevents premature sister chromatid separation during mitosis. Phosphorylation of unattached kinetochores by the Mps1 kinase promotes recruitment of SAC machinery that catalyzes assembly of the SAC effector mitotic checkpoint complex (MCC). The SAC protein Bub3 is a phospho-amino acid adaptor that forms structurally related stable complexes with functionally distinct paralogs named Bub1 and BubR1. A short motif ("loop") of Bub1, but not the equivalent loop of BubR1, enhances binding of Bub3 to kinetochore phospho-targets. Here, we asked whether the BubR1 loop directs Bub3 to different phospho-targets. The BubR1 loop is essential for SAC function and cannot be removed or replaced with the Bub1 loop. BubR1 loop mutants bind Bub3 and are normally incorporated in MCC in vitro but have reduced ability to inhibit the MCC target anaphase-promoting complex (APC/C), suggesting that BubR1:Bub3 recognition and inhibition of APC/C requires phosphorylation. Thus, small sequence differences in Bub1 and BubR1 direct Bub3 to different phosphorylated targets in the SAC signaling cascade
Recommended from our members
A simple device for multiplex ELISA made from melt-extruded plastic microcapillary film
We present a simple device for multiplex quantitative enzyme-linked immunosorbant assays (ELISA) made from a novel melt-extruded microcapillary film (MCF) containing a parallel array of 200”m capillaries along its length. To make ELISA devices different protein antigens or antibodies were immobilised inside individual microcapillaries within long reels of MCF extruded from fluorinated ethylene propylene (FEP). Short pieces of coated film were cut and interfaced with a pipette, allowing sequential uptake of samples and detection solutions into all capillaries from a reagent well. As well as being simple to produce, these FEP MCF devices have excellent light transmittance allowing direct optical interrogation of the capillaries for simple signal quantification. Proof of concept experiments demonstrate both quantitative and multiplex assays in FEP MCF devices using a standard direct ELISA procedure and read using a flatbed scanner. This new multiplex immunoassay platform should find applications ranging from lab detection to point-of-care and field diagnostics
- âŠ