Crevice Corrosion Behavior of Nickel-Based Alloy 718 in both Aerated and De-Aerated Chloride Environment

In this study, anodic potentiodynamic polarization techniques were used to study the crevice corrosion behaviour of Nickel alloy 718 (with and without a crevice former) in both aerated and de-aerated solution of 3.5wt% sodium chloride solution. Surface observation of the specimens after each experiment was done with the optical microscope. The results showed that crevice corrosion were initiated at potentials as low as 520mVSCE, while the surface observation on the specimen with a crevice former revealed that the crevice corrosion attack was restricted under the crevice gap and at the border areas of the crevice former but did not occur at the surfaces outside the shielded areas. Conversely, the specimen without a crevice former showed evidence of waterline corrosion. These results can be attributed to the development of differential oxygen concentration in the specimen depending on the exposure of the parts to dissolved oxygen. This study has developed a more comprehensive understanding of the crevice corrosion initiation mechanism and behaviour of Nickel-based Alloy 718 under applied crevice torques, chloride environment and exact potentials, thereby leading to better prevention and control of localized corrosion in this alloy

Growth Performance and Behaviour in Grouped Pigs Fed Fibrous Diet

The objective of the study was to investigate the effect of feeding fibrous diets on growth performance and occurrence of aggressive behaviours in growing pigs. Sixty healthy castrated pigs (initial body weight: 46.7±4.35 kg) were used. A basal diet was diluted with maize cobs to two levels (0 and 160 g/kg dry matter). Behavioural activities were observed using video cameras for three weeks, 8 h/d starting at 0800 h. Pigs subjected to control diet gained more weight compared to pigs receiving fibrous diet in week 1 (0.47 vs 0.15 kg, respectively) and 2 (1.37 vs 1.04, respectively) (p<0.05). Average daily gain was not affected by treatment diet in the third week. Pigs on high fibrous spent more time eating, lying down, standing, walking and fighting (p<0.05) compared to pigs on control diet. Time spent eating increased as the weeks progressed whilst time spent lying down decreased. Time of day had an effect on time spent on different behavioural activities exhibited by all pigs on different treatment diet (p<0.05). Inactivity was greatest in 5th (1200 to 1300 h) hour of the day for all the pigs on different dietary treatments. Skin lesions appeared the most on neck and shoulder region followed by chest, stomach and hind leg region, and finally head region (p<0.05). Pigs on high fibre diet had more skin lesions in all body regions compared to pigs on control diet (p<0.05). It can be concluded that the high fibrous diet with maize cobs did not affect growth performance and also did not reduce aggressive behaviours. Aggressive behaviours emanated out of frustration when queuing on the feeder. The findings of this study suggest that maize cobs can be included at a level of 160 g/kg in diets of pigs. However, to reduce the level of aggression more feeding space should be provided

Quality assessment of hydroquinone, mercury, and arsenic in skin-lightening cosmetics marketed in Ilorin, Nigeria

Hydroquinone, Mercury (Hg), and Arsenic (As) are hazardous to health upon long-term exposure. Hydroquinone, Hg, and As were analysed in skin-lightening cosmetics randomly purchased from different cosmetic outlets within the Ilorin metropolis, Nigeria. The amount of hydroquinone in the samples was determined using a UV-spectrophotometry method at 290 nm. Hg and As were quantified using atomic absorption spectrophotometry (AAS). UV-spectrophotometry method validation showed excellent linearity (r2 = 0.9993), with limits of detection (0.75 g/mL), limits of quantification (2.28 g/mL), relative standard deviation (0.01–0.35%), and recovery (95.85–103.56%) in the concentration range of 5–50 g/mL. Similarly, r2, LOD, and LOQ for Hg and As were 0.9983 and 0.9991, (0.5 and 1.0 g/L) and 1.65 and 3.3 g/L) respectively. All the samples contained hydroquinone, Hg and As in varying amounts. The amounts of hydroquinone, Hg and As present were in the ranges of 1.9–3.3%, 0.08–2.52 g/g and 0.07–5.30 g/g respectively. Only three of the analysed samples contained hydroquinone within the permissible limit of 2.0% w/w in cosmetic products. All the samples analysed contained mercury and arsenic in varying amounts. The need to periodically monitor the levels of hydroquinone, mercury, and arsenic in skin-lightening cosmetics marketed in Nigeria is recommended

Genotoxicity assessment of a pharmaceutical effluent using four bioassays

Pharmaceutical industries are among the major contributors to industrial waste. Their effluents when wrongly handled and disposed of endanger both human and environmental health. In this study, we investigated the potential genotoxicity of a pharmaceutical effluent, by using the Allium cepa, mouse- sperm morphology, bone marrow chromosome aberration (CA) and micronucleus (MN) assays. Some of the physico-chemical properties of the effluent were also determined. The A. cepa and the animal assays were respectively carried out at concentrations of 0.5, 1, 2.5, 5 and 10%; and 1, 5, 10, 25 and 50% of the effluent. There was a statistically different (p < 0.05), concentration-dependent inhibition of onion root growth and mitotic index, and induction of chromosomal aberrations in the onion and mouse CA test. Assessment of sperm shape showed that the fraction of the sperm that was abnormal in shape was significantly (p < 0.05) greater than the negative control value. MN analysis showed a dose-dependent induction of micronucleated polychromatic erythrocytes across the treatment groups. These observations were provoked by the toxic and genotoxic constituents present in test samples. The tested pharmaceutical effluent is a potentially genotoxic agent and germ cell mutagen, and may induce adverse health effects in exposed individuals

Neuro-feedback intervention efficacy for treating children with Autism Spectrum Disorder

This study explored practitioners perceptions of a neuro-feedback intervention in treating children with Autism Spectrum Disorder’s (ASD). Informants were a convenience sample of ten South African neuro-feedback practitioners registered with the Health Professions Council of South Africa (HPCSA). The data on their views on neuro-feedback treatment efficacy, with children with ASD, were collected by means of semi-structured in-depth interviews. Thematic analysis of the data suggest practitioners to perceive neuro-feedback treatment to enhance the social, mood, behaviour, academic life, and family functioning of children with ASD. Additionally, the practitioners perceived neuro-feedback treatment to assist in reducing anxiety among children with ASD

We need to talk about manels: the problem of implicit gender bias in sport and exercise medicine.

In 2015, a website (www.allmalepanels.tumblr. com/) began documenting instances of all-male panels (colloquially known as a ‘manel’). This, along with the Twitter hashtag #manel, has helped drive recognition of the persistent and pervasive gender bias in the composition of experts assembled to present at conferences and other events. Recent social media discussions have similarly highlighted the prevalence of all-male panels in Sport and Exercise Medicine (SEM). While, to our knowledge, all-male panel trends in SEM have not yet formally been documented or published, one need look no further than SEM conference committees, keynote speaker lists, panels and other events to see that it exists in practice. Why, in 2018, is SEM and its related disciplines still failing to identify and acknowledge the role that implicit bias plays in the very structure of our own research, practice and education? SEM is, after all, a profession that contains experts, and serves populations, of all genders. This editorial will introduce the definition, implications and manifestations of implicit gender bias and then explore how the SEM community can begin to address this issue, advance the discussion and develop a more equitable global community

Quantification of the efficiency of treatment of Anopheles gambiae breeding sites with petroleum products by local communities in areas of insecticide resistance in the Republic of Benin

<p>Abstract</p> <p>Background</p> <p>The emergence of <it>Anopheles </it>populations capable of withstanding lethal doses of insecticides has weakened the efficacy of most insecticide based strategies of vector control and, has highlighted the need for developing new insecticidal molecules or, improving the efficacy of existing insecticides or abandoning those to which resistance has emerged. The use of petroleum products (PP) against mosquito larvae had an immense success during early programmes of malaria control, but these compounds were abandoned and replaced in the 1950s by synthetic insecticides probably because of the high performances given by these new products. In the current context of vector resistance, it is important to elucidate the empirical use of PP by quantifying their efficiencies on resistant strains of <it>Anopheles</it>.</p> <p>Methods</p> <p>Larvae of <it>Anopheles </it>Ladji a local resistant strain were exposed to increasing concentrations of various PP (kerosene, petrol and engine oils) for 24 hours and the lethal activities recorded. The highest concentration (HiC) having no lethal activity (also referred as the NOEL or no effect level) and the lowest concentration (LoC₁₀₀) yielding 100% mortality were rated for each PP on the Ladji strain. Prior to laboratory analysis, KAP studies were conducted in three traditional communities were insecticide resistance is clearly established to confirm the use of PP against mosquitoes.</p> <p>Results</p> <p>Laboratory analysis of petrol, kerosene and engine oils, clearly established their lethal activities on resistant strains of <it>Anopheles </it>larvae. Contrary to existing references, this research revealed that exposed larvae of <it>Anopheles </it>were mostly killed by direct contact toxicity and not by suffocation as indicated in some earlier reports.</p> <p>Conclusion</p> <p>This research could serve as scientific basis to backup the empirical utilisation of PP on mosquito larvae and to envisage possibilities of using PP in some traditional settings where <it>Anopheles </it>have developed resistance to currently used insecticides.</p

Does the spillage of petroleum products in Anopheles breeding sites have an impact on the pyrethroid resistance?

<p>Abstract</p> <p>Background</p> <p>The emergence of <it>Anopheles </it>populations capable of withstanding lethal doses of insecticides has weakened the efficacy of most insecticide based strategies of vector control and, has highlighted the need for further studies on the mechanisms of insecticide resistance and the various factors selecting resistant populations of mosquitoes. This research targeted the analysis of breeding sites and the oviposition behaviour of susceptible and resistant populations of <it>Anopheles </it>in localities of spilled petroleum products. The aim was to establish the possible contribution of oil spillage in the selection of pyrethroid resistance in malaria vectors.</p> <p>Methods</p> <p><it>Anopheles </it>breeding sites were identified and the insecticide susceptibility of the <it>Anopheles gambiae </it>populations mapped in 15 localities of South Western Nigeria. The presence of oil particles as well as the turbidity, the dissolved oxygen and the pH of each identified breeding site was recorded. Data were cross-analysed to correlate the habitat types and the insecticide susceptibility status of emerging mosquitoes. The second phase of this study was basically a laboratory model to provide more information on the implication of the spillage of petroleum on the selection of pyrethroid resistance in <it>An. gambiae</it>.</p> <p>Results</p> <p>Moderate levels of resistance following exposure to permethrin-impregnated papers were recorded with the majority of <it>An. gambiae </it>samples collected in the South Western Nigeria. Data from this study established a link between the constituency of the breeding sites and the resistance status of the emerging <it>Anopheles</it>.</p> <p>Conclusion</p> <p>This study has revealed the segregational occupation of breeding habitats by pyrethroid resistant and susceptible strains of <it>An. gambiae </it>in south-western Nigeria. Compiled results from field and laboratory research point out clear relationships between oil spillage and pyrethroid resistance in malaria vectors. The identification of this factor of resistance could serve as strong information in the management of insecticide resistance in some West African settings.</p

Thermal properties comparison of hybrid CF/FF and BF/FF cyanate ester-based composites

[EN] Insights within thermal expansion, conductivity, and decomposition dependencies with temperature on symmetrical and unsymmetrical layered carbon (CF) or basalt (BF) fabrics in combination with flax fibers (FF) were approached. Driven by commercial application and environmental concerns, the paper draws attention on a modified formula of cyanate ester with a common epoxy resin under an optimized ratio of 70:30 (vol%) as well as on the hybrid reinforcements stacking sequences. Synergetic effects were debated in terms of the CF and BF stacking sequences and corresponding volume fraction followed by comparisons with values predicted by the deployment of hybrid mixtures rules (RoHM/iRoHM). CF hybrid architectures revealed enhanced effective thermophysical properties over their BF counterparts and both over the FF-reinforced polymer composite considered as a reference. Thermal conductivities spread between 0.116 and 0.299 W m-1 K-1 from room temperature up to 250 C on all hybrid specimens, giving rise to an insulator character. Concerning the coefficient of thermal expansion, CF hybrid architectures disclosed values of 1.236 10-6 K-1 and 3.102 10-6 K-1 compared with BF affine exhibiting 4.794 10-6 K-1 and 6.245 10-6 K-1, respectively, with an increase in their volume fraction.The corresponding author gratefully acknowledges the financial assistance of German Academic Exchange Service-DAAD that enabled and supported the internship with Fraunhofer Research Institution for Polymeric Materials and Composites-PYCO, Germany. Many thanks go to Dr. Christian Dreyer and Dr. Maciej Gwiazda for the resin formula and access to the composite manufacturing technology.Motoc, DL.; Ferrándiz Bou, S.; Balart, R. (2018). Thermal properties comparison of hybrid CF/FF and BF/FF cyanate ester-based composites. Journal of Thermal Analysis and Calorimetry. 133(1):509-518. https://doi.org/10.1007/s10973-018-7222-yS5095181331Assarar M, Zouari W, Sabhi H, Ayad R, Berthelot J-M. Evaluation of the damping of hybrid carbon–flax reinforced composites. Compos Struct. 2015;132:148–54.Duc F, Bourban PE, Plummer CJG, Månson JAE. Damping of thermoset and thermoplastic flax fibre composites. Compos A Appl Sci Manuf. 2014;64:115–23.Saba N, Jawaid M, Alothman OY, Paridah MT. A review on dynamic mechanical properties of natural fibre reinforced polymer composites. Constr Build Mater. 2016;106:149–59.Tian H, Zhang S, Ge X, Xiang A. Crystallization behaviors and mechanical properties of carbon fiber-reinforced polypropylene composites. J Therm Anal Calorim. 2017;128(3):1495–504.Alvarez V, Rodriguez E, Vázquez A. Thermaldegradation and decomposition of jute/vinylester composites. J Therm Anal Calorim. 2006;85(2):383–9.Manfredi LB, Rodríguez ES, Wladyka-Przybylak M, Vázquez A. Thermal degradation and fire resistance of unsaturated polyester, modified acrylic resins and their composites with natural fibres. Polym Degrad Stab. 2006;91(2):255–61.Lazko J, Landercy N, Laoutid F, Dangreau L, Huguet MH, Talon O. Flame retardant treatments of insulating agro-materials from flax short fibres. Polym Degrad Stab. 2013;98(5):1043–51.Bar M, Alagirusamy R, Das A. Flame retardant polymer composites. Fibers Polym. 2015;16(4):705–17.Kollia E, Loutas T, Fiamegkou E, Vavouliotis A, Kostopoulos V. Degradation behavior of glass fiber reinforced cyanate ester composites under hydrothermal ageing. Polym Degrad Stab. 2015;121:200–7.Jawaid M, Abdul Khalil HPS. Cellulosic/synthetic fibre reinforced polymer hybrid composites: a review. Carbohyd Polym. 2011;86(1):1–18.Azwa ZN, Yousif BF, Manalo AC, Karunasena W. A review on the degradability of polymeric composites based on natural fibres. Mater Des. 2013;47:424–42.H-y Cheung, M-p Ho, K-t Lau, Cardona F, Hui D. Natural fibre-reinforced composites for bioengineering and environmental engineering applications. Compos B Eng. 2009;40(7):655–63.Dittenber DB, GangaRao HVS. Critical review of recent publications on use of natural composites in infrastructure. Compos A Appl Sci Manuf. 2012;43(8):1419–29.Faruk O, Bledzki AK, Fink H-P, Sain M. Biocomposites reinforced with natural fibers: 2000–2010. Prog Polym Sci. 2012;37(11):1552–96.Praveen RS, Jacob S, Murthy CRL, Balachandran P, Rao YVKS. Hybridization of carbon–glass epoxy composites: an approach to achieve low coefficient of thermal expansion at cryogenic temperatures. Cryogenics. 2011;51(2):95–104.Jawaid M, Abdul Khalil HPS, Alattas OS. Woven hybrid biocomposites: dynamic mechanical and thermal properties. Compos A Appl Sci Manuf. 2012;43(2):288–93.Swolfs Y, Gorbatikh L, Verpoest I. Fibre hybridisation in polymer composites: a review. Compos A Appl Sci Manuf. 2014;67:181–200.Rojo E, Alonso MV, Oliet M, Del Saz-Orozco B, Rodriguez F. Effect of fiber loading on the properties of treated cellulose fiber-reinforced phenolic composites. Compos B Eng. 2015;68:185–92.LeGault M. Natural fiber composites: market share, one part at the time. Compos World. 2016;5(2):68–75.Joshi SV, Drzal LT, Mohanty AK, Arora S. Are natural fiber composites environmentally superior to glass fiber reinforced composites? Compos A Appl Sci Manuf. 2004;35(3):371–6.Wambua P, Ivens J, Verpoest I. Natural fibres: can they replace glass in fibre reinforced plastics? Compos Sci Technol. 2003;63(9):1259–64.Bertomeu D, García-Sanoguera D, Fenollar O, Boronat T, Balart R. Use of eco-friendly epoxy resins from renewable resources as potential substitutes of petrochemical epoxy resins for ambient cured composites with flax reinforcements. Polym Compos. 2012;33(5):683–92.Alam M, Akram D, Sharmin E, Zafar F, Ahmad S. Vegetable oil based eco-friendly coating materials: a review article. Arab J Chem. 2014;7(4):469–79.Bakare FO, Ramamoorthy SK, Åkesson D, Skrifvars M. Thermomechanical properties of bio-based composites made from a lactic acid thermoset resin and flax and flax/basalt fibre reinforcements. Compos A Appl Sci Manuf. 2016;83:176–84.Pardauil JJR, de Molfetta FA, Braga M, de Souza LKC, Filho GNR, Zamian JR, et al. Characterization, thermal properties and phase transitions of amazonian vegetable oils. J Therm Anal Calorim. 2017;127(2):1221–9.Głowińska E, Datta J, Parcheta P. Effect of sisal fiber filler on thermal properties of bio-based polyurethane composites. J Therm Anal Calorim. 2017;130(1):113–22.Mosiewicki MA, Aranguren MI. A short review on novel biocomposites based on plant oil precursors. Eur Polym J. 2013;49(6):1243–56.Lligadas G, Ronda JC, Galià M, Cádiz V. Renewable polymeric materials from vegetable oils: a perspective. Mater Today. 2013;16(9):337–43.Fombuena V, Sanchez-Nacher L, Samper MD, Juarez D, Balart R. Study of the properties of thermoset materials derived from epoxidized soybean oil and protein fillers. J Am Oil Chem Soc. 2013;90(3):449–57.Pil L, Bensadoun F, Pariset J, Verpoest I. Why are designers fascinated by flax and hemp fibre composites? Compos A Appl Sci Manuf. 2016;83:193–205.Wooster TJ, Abrol S, Hey JM, MacFarlane DR. Thermal, mechanical, and conductivity properties of cyanate ester composites. Compos A Appl Sci Manuf. 2004;35(1):75–82.Mallarino S, Chailan JF, Vernet JL. Glass fibre sizing effect on dynamic mechanical properties of cyanate ester composites I. Single frequency investigations. Eur Polym J. 2005;41(8):1804–11.Sothje D, Dreyer C, Bauer M, editors. Advanced possibilities in thermoset recycling. In: The 3rd international conference on thermosets. 2013; Berlin, Germany.Yuan L, Huang S, Gu A, Liang G, Chen F, Hu Y, et al. A cyanate ester/microcapsule system with low cure temperature and self-healing capacity. Compos Sci Technol. 2013;87:111–7.Czigány T. Special manufacturing and characteristics of basalt fiber reinforced hybrid polypropylene composites: mechanical properties and acoustic emission study. Compos Sci Technol. 2006;66(16):3210–20.Marom G, Fischer S, Tuler FR, Wagner HD. Hybrid effects in composites: conditions for positive or negative effects versus rule-of-mixtures behaviour. J Mater Sci. 1978;13(7):1419–26.Torquato S. Random heterogeneous materials: microstructure and macroscopic properties. New York: Springer; 2002.Cherki A-B, Remy B, Khabbazi A, Jannot Y, Baillis D. Experimental thermal properties characterization of insulating cork–gypsum composite. Constr Build Mater. 2014;54:202–9.Bismarck A, Aranberri-Askargorta I, Springer J, Lampke T, Wielage B, Stamboulis A, et al. Surface characterization of flax, hemp and cellulose fibers; Surface properties and the water uptake behavior. Polym Compos. 2002;23(5):872–94.Motoc Luca D, Ferrandiz Bou S, Balart Gimeno R. Effects of fibre orientation and content on the mechanical, dynamic mechanical and thermal expansion properties of multi-layered glass/carbon fibre-reinforced polymer composites. J Compos Mater. 2014;49(10):1211–1221.CES EduPack. Granta Design; 2013.Monteiro SN, Calado V, Rodriguez RJS, Margem FM. Thermogravimetric behavior of natural fibers reinforced polymer composites—An overview. Mater Sci Eng, A. 2012;557:17–28

Single DermaVir Immunization: Dose-Dependent Expansion of Precursor/Memory T Cells against All HIV Antigens in HIV-1 Infected Individuals

BACKGROUND: The GIHU004 study was designed to evaluate the safety and immunogenicity of three doses of DermaVir immunization in HIV-infected subjects on fully suppressive combination antiretroviral therapy (cART). METHODOLOGY/PRINCIPAL FINDINGS: This first-in-human dose escalation study was conducted with three topical DermaVir doses targeted to epidermal Langerhans cells to express fifteen HIV antigens in draining lymph nodes: 0.1 mg DNA targeted to two, 0.4 mg and 0.8 mg DNA targeted to four lymph nodes. Particularly, in the medium dose cohort 0.1 mg DNA was targeted per draining lymph node via ∼8 million Langerhans cells located in 80 cm(2) epidermis area. The 28-days study with 48-week safety follow-up evaluated HIV-specific T cell responses against Gag p17, Gag p24 and Gag p15, Tat and Rev antigens. DermaVir-associated side effects were mild, transient and not dose-dependent. Boosting of HIV-specific effector CD4(+) and CD8(+) T cells expressing IFN-gamma and IL-2 was detected against several antigens in every subject of the medium dose cohort. The striking result was the dose-dependent expansion of HIV-specific precursor/memory T cells with high proliferation capacity. In low, medium and high dose cohorts this HIV-specific T cell population increased by 325-, 136,202 and 50,759 counts after 4 weeks, and by 3,899, 9,878 and 18,382 counts after one year, respectively, compared to baseline. CONCLUSIONS/SIGNIFICANCE: Single immunization with the DermaVir candidate therapeutic vaccine was safe and immunogenic in HIV-infected individuals. Based on the potent induction of Gag, Tat and Rev-specific memory T cells, especially in the medium dose cohort, we speculate that DermaVir boost T cell responses specific to all the 15 HIV antigens expressed from the single DNA. For durable immune reactivity repeated DermaVir immunization might be required since the frequency of DermaVir-boosted HIV-specific memory T cells decreased during the 48-week follow up. TRIAL REGISTRATION: ClinicalTrial.gov NCT00712530