Effects of Blending Sequence on Morphology and Mechanical Properties of Polypropylene/Ethylene-octene Copolymer/Clay Nanocomposites

Abstract The objective of this study was to investigate the effects of three blending sequences on morphology and properties of the ternary nanocomposite of polypropylene (PP)/ethylene-octene copolymer (EOC)/clay with double compatibilizers of maleated PP (PP-g-MA) and maleated EOC (EOC-g-MA) prepared by twin-screw extrusion. The X-ray diffraction results in conjuction with transmission electron microscopy images indicated the mixture of exfoliated and intercalated structures possessed by the nanocomposite prepared by simultaneous addition of the ingredients. The nanocomposite in which clay was first mixed with PP and EOC-g-MA and then with EOC and PP-g-MA showed the same morphology. However, in the nanocomposite when clay was first mixed with PP and PP-g-MA and then mixed with EOC and EOC-g-MA, an intercalated structure was observed. The results of mechanical testing showed that there was no significant difference in the yield strength, tensile modulus and flexural modulus among the three nanocomposites. However, the Charpy impact strength of the nanocomposite prepared by simultaneous addition of ingredients was higher than that of the nanocomposites prepared in two mixing steps because of the presence of more organoclay inside the EOC phase in the former

Boron tolerance in grain legumes with particular reference to the genetics of boron tolerance in peas / Abdolreza Bagheri Kazemabad.

Bibliography: leaves 200-223.xii, 225, [15] leaves, [19] leaves of plates : ill. (some col.), maps (some col.) ; 30 cm.Thesis (Ph.D.)--University of Adelaide, Dept. of Plant Science, 1995

Genetic distance detected with RAPD markers among selected Australian commercial varieties and boron-tolerant exotic germplasm of pea (Pisum sativum L.)

The optimisation of polymerase chain reaction (PCR) for random amplified polymorphic DNA (RAPD) analysis in pea was investigated and the results were applied to an analysis of five representative Australian varieties and five selected boron-tolerant accessions derived from different geographical regions. Genotypes were compared using 34 random primers (Operon Technologies, Alameda, CA) which generated 180 polymorphic bands. Genetic similarity among genotypes was estimated on the basis of the percentage of common bands between genotypes and a dendrogram was constructed by the unweighted pair grouping method. A pattern of RAPD reaction corresponding to two main groups was discerned. The genetic divergence between Australian varieties and the boron-tolerant accessions suggests an intensive back-crossing programme would be required to transfer boron tolerance to a locally adapted genetic background. Our results show RAPD to be useful for clarifying phylogenic relationships within a species and also to provide useful genetic markers for varietal identification in pea.A. Bagheri, J. G. Paull, P. Langridge and A. J. Rathje

Effects of blending sequence on morphology and mechanical properties of polypropylene/ethylene-octene copolymer/clay nanocomposites

Abstract The objective of this study was to investigate the effects of three blending sequences on morphology and properties of the ternary nanocomposite of polypropylene (PP)/ethylene-octene copolymer (EOC)/clay with double compatibilizers of maleated PP (PP-g-MA) and maleated EOC (EOC-g-MA) prepared by twin-screw extrusion. The X-ray diffraction results in conjuction with transmission electron microscopy images indicated the mixture of exfoliated and intercalated structures possessed by the nanocomposite prepared by simultaneous addition of the ingredients. The nanocomposite in which clay was first mixed with PP and EOC-g-MA and then with EOC and PP-g-MA showed the same morphology. However, in the nanocomposite when clay was first mixed with PP and PP-g-MA and then mixed with EOC and EOC-g-MA, an intercalated structure was observed. The results of mechanical testing showed that there was no significant difference in the yield strength, tensile modulus and flexural modulus among the three nanocomposites. However, the Charpy impact strength of the nanocomposite prepared by simultaneous addition of ingredients was higher than that of the nanocomposites prepared in two mixing steps because of the presence of more organoclay inside the EOC phase in the former