An inverse approach to determine complex modulus gradient of field-aged asphalt mixtures

This study develops a new mechanical-based method to determine the complex modulus and modulus gradient of field-aged asphalt mixtures using the direct tension test. Due to the non-uniform aging nature of the field cores, the mechanical responses must be measured at different depths. Meanwhile, the monotonic load is not applied at the neutral axis of the field core specimen due to the modulus gradient, the tensile part of the strain is used and should be separated from the measurement because of the eccentric loading. The modulus gradient parameters, the location of the neutral axis, and the stress distribution are first obtained using the elastic formulas for a series of loading times. Then the complex modulus is determined using the Laplace transform and the elastic–viscoelastic correspondence principle. An inverse approach and iteration are then proposed by using the pseudo strain to accurately calculate the modulus gradient parameters after the relaxation modulus and reference modulus are determined

An experimental investigation of properties of Q345 steel pipe at elevated temperatures

This paper presents the results of an extensive experimental investigation of the thermal and mechanical properties of Q345 steel pipe at elevated temperatures using both the steady-state and transient-state test methods. Under these two test conditions, the thermal expansion coefficient, yield strength and elastic modulus of the specimens at different temperatures were measured. The tested results indicate that both the yield strength and elastic modulus decrease gradually with increasing temperature. However, at the same temperature, both the yield strength and elastic modulus tested using the steady-state test are higher than those tested using the transient-state test. Hence, it is less safe to use the material properties tested using the steady-state test for fire resistance design of the steel structure. Based on the transient-state test results, the models of the mechanical properties of Q345 steel pipe at elevated temperatures were proposed. These models can be used for the design and analysis of Q345 steel pipe structures under fire conditions.2012 Specialized Research Fund for the Doctoral Programme of Higher Education of China (Grant No. 20120095110027)

Metabolomics demonstrates divergent responses of two Eucalyptus species to water stress

Past studies of water stress in Eucalyptus spp. generally highlighted the role of fewer than five “important” metabolites, whereas recent metabolomic studies on other genera have shown tens of compounds are affected. There are currently no metabolite profiling data for responses of stress-tolerant species to water stress. We used GC–MS metabolite profiling to examine the response of leaf metabolites to a long (2 month) and severe (Ψpredawn < −2 MPa) water stress in two species of the perennial tree genus Eucalyptus (the mesic Eucalyptus pauciflora and the semi-arid Eucalyptus dumosa). Polar metabolites in leaves were analysed by GC–MS and inorganic ions by capillary electrophoresis. Pressure–volume curves and metabolite measurements showed that water stress led to more negative osmotic potential and increased total osmotically active solutes in leaves of both species. Water stress affected around 30–40% of measured metabolites in E. dumosa and 10–15% in E. pauciflora. There were many metabolites that were affected in E. dumosa but not E. pauciflora, and some that had opposite responses in the two species. For example, in E. dumosa there were increases in five acyclic sugar alcohols and four low-abundance carbohydrates that were unaffected by water stress in E. pauciflora. Re-watering increased osmotic potential and decreased total osmotically active solutes in E. pauciflora, whereas in E. dumosa re-watering led to further decreases in osmotic potential and increases in total osmotically active solutes. This experiment has added several extra dimensions to previous targeted analyses of water stress responses in Eucalyptus, and highlights that even species that are closely related (e.g. congeners) may respond differently to water stress and re-waterin

Bioavailability in soils

The consumption of locally-produced vegetables by humans may be an important exposure pathway for soil contaminants in many urban settings and for agricultural land use. Hence, prediction of metal and metalloid uptake by vegetables from contaminated soils is an important part of the Human Health Risk Assessment procedure. The behaviour of metals (cadmium, chromium, cobalt, copper, mercury, molybdenum, nickel, lead and zinc) and metalloids (arsenic, boron and selenium) in contaminated soils depends to a large extent on the intrinsic charge, valence and speciation of the contaminant ion, and soil properties such as pH, redox status and contents of clay and/or organic matter. However, chemistry and behaviour of the contaminant in soil alone cannot predict soil-to-plant transfer. Root uptake, root selectivity, ion interactions, rhizosphere processes, leaf uptake from the atmosphere, and plant partitioning are important processes that ultimately govern the accumulation ofmetals and metalloids in edible vegetable tissues. Mechanistic models to accurately describe all these processes have not yet been developed, let alone validated under field conditions. Hence, to estimate risks by vegetable consumption, empirical models have been used to correlate concentrations of metals and metalloids in contaminated soils, soil physico-chemical characteristics, and concentrations of elements in vegetable tissues. These models should only be used within the bounds of their calibration, and often need to be re-calibrated or validated using local soil and environmental conditions on a regional or site-specific basis.Mike J. McLaughlin, Erik Smolders, Fien Degryse, and Rene Rietr

High origin of a testicular artery: a case report and review of the literature

<p>Abstract</p> <p>Introduction</p> <p>Although variations in the origin of the testicular artery are not uncommon, few reports about a high origin from the abdominal aorta exist in the literature. We discuss the case of a high origin of the testicular artery, its embryology, classification systems, and its clinical significance.</p> <p>Case presentation</p> <p>We report a very rare case of high origin of the left testicular artery in a 68-year-old Caucasian male cadaver. The artery originated from the anterolateral aspect of the abdominal aorta, 2 cm cranially to the ipsilateral renal artery. Approximately 1 cm after its origin, it branched off into the inferior suprarenal artery. During its course, the artery crossed anterior to the left renal artery.</p> <p>Conclusions</p> <p>A knowledge of the variant origin of the testicular artery is important during renal and testicular surgery. The origin and course must be carefully identified in order to preserve normal blood circulation and prevent testicular atrophy. A reduction in gonadal blood flow may lead to varicocele under circumstances. A knowledge of this variant anatomy may be of interest to radiologists and helpful in avoiding diagnostic errors.</p

Strain induced exciton fine-structure splitting and shift in bent ZnO microwires

Lattice strain is a useful and economic way to tune the device performance and is commonly present in nanostructures. Here, we investigated for the first time the exciton spectra evolution in bent ZnO microwires along the radial direction via high spatial/energy resolution cathodeluminescence spectroscopy at 5.5 K. Our experiments show that the exciton peak splits into multi fine peaks towards the compressive part while retains one peak in the tensile part and the emission peak displays a continuous blue-shift from tensile to compressive edges. In combination with first-principles calculations, we show that the observed NBE emission splitting is due to the valence band splitting and the absence of peak splitting in the tensile part maybe due to the highly localized holes in the A band and the carrier density distribution across the microwire. Our studies may pave the way to design nanophotonic and electronic devices using bent ZnO nanowires

Observation of a ppb mass threshoud enhancement in \psi^\prime\to\pi^+\pi^-J/\psi(J/\psi\to\gamma p\bar{p}) decay

The decay channel $\psi^\prime\to\pi^+\pi^-J/\psi(J/\psi\to\gamma p\bar{p})$ is studied using a sample of $1.06\times 10^8$ $\psi^\prime$ events collected by the BESIII experiment at BEPCII. A strong enhancement at threshold is observed in the $p\bar{p}$ invariant mass spectrum. The enhancement can be fit with an $S$-wave Breit-Wigner resonance function with a resulting peak mass of $M=1861^{+6}_{-13} {\rm (stat)}^{+7}_{-26} {\rm (syst)} {\rm MeV/}c^2$ and a narrow width that is $\Gamma<38 {\rm MeV/}c^2$ at the 90% confidence level. These results are consistent with published BESII results. These mass and width values do not match with those of any known meson resonance.Comment: 5 pages, 3 figures, submitted to Chinese Physics

Active Nuclear Receptors Exhibit Highly Correlated AF-2 Domain Motions

Nuclear receptor ligand binding domains (LBDs) convert ligand binding events into changes in gene expression by recruiting transcriptional coregulators to a conserved activation function-2 (AF-2) surface. While most nuclear receptor LBDs form homo- or heterodimers, the human nuclear receptor pregnane X receptor (PXR) forms a unique and essential homodimer and is proposed to assemble into a functional heterotetramer with the retinoid X receptor (RXR). How the homodimer interface, which is located 30 Å from the AF-2, would affect function at this critical surface has remained unclear. By using 20- to 30-ns molecular dynamics simulations on PXR in various oligomerization states, we observed a remarkably high degree of correlated motion in the PXR–RXR heterotetramer, most notably in the four helices that create the AF-2 domain. The function of such correlation may be to create “active-capable” receptor complexes that are ready to bind to transcriptional coactivators. Indeed, we found in additional simulations that active-capable receptor complexes involving other orphan or steroid nuclear receptors also exhibit highly correlated AF-2 domain motions. We further propose a mechanism for the transmission of long-range motions through the nuclear receptor LBD to the AF-2 surface. Taken together, our findings indicate that long-range motions within the LBD scaffold are critical to nuclear receptor function by promoting a mobile AF-2 state ready to bind coactivators