Effect of design changes and operating conditions on combustion and operational performance of a 28-inch diameter Ram-jet engine / T. B. Shillito and Shigeo Nakanishi

The results of an altitude test-chamber investigation of the effects of a number of design changes and operating conditions on altitude peformance of a 28-inch diameter ram jet engine are presented. Most of the investigation was for a simulated flight Mach number of 2.0 above the tropopause. Fuel-air distribution, gutter width, the presence of a pilot flame, cimbustion-chamber-inlet temperature, and exhaust-nozzle throat area were found to have significant effects on limits of combustion. Combustion efficiency increased with increasing combustion-chamber-inlet temperature and was adversely affected by an increase in the exhaust-nozzld area. Similiar lean limits of combustion were obtained for both Diesel fuel and normal heptane, but combustion efficiences obtained with Diesel fuel were lower than those obtained with normal heptane

Exhaust Nozzles for Supersonic Flight with Turbojet Engines

Good internal performance over a wide range of flight conditions can be obtained with either a plug nozzle or a variable ejector nozzle that can provide a divergent shroud at high pressure ratios. For both the ejector and the plug nozzle, external flow can sometimes cause serious drag losses and, for some plug-nozzle installations, external flow can cause serious internal performance losses. Plug-nozzle cooling and design of the secondary-air-flow systems for ejectors were also considered

Altitude Test Chamber Investigation of Performance of a 28-inch Ram-jet Engine II : Effects of Gutter Width and Blocked Area on Operating Range and Combustion Efficiency

Altitude-test-chamber investigation of effects of flame-holder blocked area and gutter width on performance of 28-inch diameter ram jet at simulated flight Mach number of 2.0 for altitudes from 40,000 to 55,000 feet was conducted at NACA Lewis laboratory. Ten flame holders investigated covered gutter widths from 1.00 to 2.50 inches and blocked areas from 40.5 to 62.0 percent of combustion-chamber area. Gutter width did not appreciably affect combustion efficiency. Increase in blocked area from 40 to 62 percent resulted in 5- to 10-percent increase in combustion efficiency. Increasing gutter width resulted in improvement in fuel-air-ratio operating range

Barriers and facilitators experienced by osteopaths in implementing a biopsychosocial (BPS) framework of care when managing people with musculoskeletal pain – a mixed methods systematic review

BACKGROUND: Clinical practice guidelines commonly recommend adopting a biopsychosocial (BPS) framework by practitioners managing musculoskeletal pain. However, it remains unclear how osteopaths implement a BPS framework in the management of musculoskeletal pain. Hence, the objective of this review was to systematically appraise the literature on the current practices, barriers and facilitators experienced by osteopaths in implementing a BPS framework of care when managing people with musculoskeletal pain. METHODS: The following electronic databases from January 2005 to August 2020 were searched: PubMed, CINAHL, Science Direct, Google Scholar, ProQuest Central and SCOPUS. Two independent reviewers reviewed the articles retrieved from the databases to assess for eligibility. Any studies (quantitative, qualitative and mixed methods) that investigated the use or application of the BPS approach in osteopathic practice were included in the review. The critical appraisal skills program (CASP) checklist was used to appraise the qualitative studies and the Mixed Methods Appraisal Tool (MMAT) was used to appraise quantitative or mixed methods studies. Advanced convergent meta-integration was used to synthesise data from quantitative, qualitative and mixed methods studies. RESULTS: A total of 6 studies (two quantitative, three qualitative and one mixed methods) were included in the final review. While two key concepts (current practice and embracing a BPS approach) were generated using advanced meta-integration synthesis, two concepts (barriers and enablers) were informed from qualitative only data. DISCUSSION: Our review finding showed that current osteopathic practice occurs within in the biomedical model of care. Although, osteopaths are aware of the theoretical underpinnings of the BPS model and identified the need to embrace it, various barriers exist that may prevent osteopaths from implementing the BPS model in clinical practice. Ongoing education and/or workshops may be necessary to enable osteopaths to implement a BPS approach

The potential for climate-driven bathymetric range shifts: sustained temperature and pressure exposures on a marine ectotherm, Palaemonetes varians

Range shifts are of great importance as a response for species facing climate change. In the light of current ocean-surface warming, many studies have focused on the capacity of marine ectotherms to shift their ranges latitudinally. Bathymetric range shifts offer an important alternative, and may be the sole option for species already at high latitudes or those within enclosed seas; yet relevant data are scant. Hydrostatic pressure (HP) and temperature have wide ranging effects on physiology, importantly acting in synergy thermodynamically, and therefore represent key environmental constraints to bathymetric migration. We present data on transcriptional regulation in a shallow-water marine crustacean (Palaemonetes varians) at atmospheric and high HP following 168-h exposures at three temperatures across the organisms' thermal scope, to establish the potential physiological limit to bathymetric migration by neritic fauna. We observe changes in gene expression indicative of cellular macromolecular damage, disturbances in metabolic pathways and a lack of acclimation after prolonged exposure to high HP. Importantly, these effects are ameliorated (less deleterious) at higher temperatures, and exacerbated at lower temperatures. These data, alongside previously published behavioural and heat-shock analyses, have important implications for our understanding of the potential for climate-driven bathymetric range shift

Are shallow-water shrimps proxies for hydrothermal-vent shrimps to assess the impact of deep-sea mining?

Polymetallic seafloor massive sulphide deposits are potential targets for deep-sea mining, but high concentrations of metals (including copper - Cu) may be released during exploitation activities, potentially inducing harmful impact. To determine whether shallow-water shrimp are suitable ecotoxicological proxies for deep-sea hydrothermal vent shrimp the effects of waterborne Cu exposure (3 and 10 days at 0.4 and 4 μM concentrations) in Palaemon elegans, Palaemon serratus, and Palaemon varians were compared with Mirocaris fortunata. Accumulation of Cu and a set of biomarkers were analysed. Results show different responses among congeneric species indicating that it is not appropriate to use shallow-water shrimps as ecotoxicological proxies for deep-water shrimps. During the evolutionary history of these species they were likely subject to different chemical environments which may have induced different molecular/biochemical adaptations/tolerances. Results highlight the importance of analysing effects of deep-sea mining in situ and in local species to adequately assess ecotoxicological effects under natural environmental conditions.This work was developed under the MIDAS project (Managing im-pacts of deep-sea resource exploitation), funded by the EuropeanCommission, European Union, 7th Framework Programme under thetheme“Sustainable management of Europe's deep sea and sub-seafloorresources”(Grant Agreement 603418). This work was also supported bythe Fundação para a Ciência e Tecnologia I.P. Portugal (FCT) and theDireção-Geral de Política do Mar (DGPM), Portugal through the projectMining2/2017/001–MiningImpact 2 (JPI Oceans), and FCT furtherfunded the grants CEECIND005262017 and UID/MAR/00350/2013.We acknowledge the captains and crews of the oceanographic ship“Pourquoi Pas?”, and the pilots of Victor 6000 Remotely OperatedVehicle, for their dedicated assistance during sampling of vent shrimps.We are also grateful to F. Lallier, chief scientist of the Biobaz cruise. Wewould like to warmly thank Océanopolis staffmembers, J-M Carré, SDelaporte and O Gouello, for their important contributions to shrimpmaintenance.info:eu-repo/semantics/publishedVersio