The self-consistent quantum-electrostatic problem in strongly non-linear regime

The self-consistent quantum-electrostatic (also known as Poisson-Schr\"odinger) problem is notoriously difficult in situations where the density of states varies rapidly with energy. At low temperatures, these fluctuations make the problem highly non-linear which renders iterative schemes deeply unstable. We present a stable algorithm that provides a solution to this problem with controlled accuracy. The technique is intrinsically convergent including in highly non-linear regimes. We illustrate our approach with (i) a calculation of the compressible and incompressible stripes in the integer quantum Hall regime and (ii) a calculation of the differential conductance of a quantum point contact geometry. Our technique provides a viable route for the predictive modeling of the transport properties of quantum nanoelectronics devices.Comment: 28 pages. 14 figures. Added solution to a potential failure mode of the algorith

Sub-Terahertz Monochromatic Transduction with Semiconductor Acoustic Nanodevices

We demonstrate semiconductor superlattices or nanocavities as narrow band acoustic transducers in the sub-terahertz range. Using picosecond ultrasonics experiments in the transmission geometry with pump and probe incident on opposite sides of the thick substrate, phonon generation and detection processes are fully decoupled. Generating with the semiconductor device and probing on the metal, we show that both superlattices and nanocavities generate spectrally narrow wavepackets of coherent phonons with frequencies in the vicinity of the zone center and time durations in the nanosecond range, qualitatively different from picosecond broadband pulses usually involved in picosecond acoustics with metal generators. Generating in the metal and probing on the nanoacoustic device, we furthermore evidence that both nanostructured semiconductor devices may be used as very sensitive and spectrally selective detectors

EFFECT OF CALCINATION TEMPERATURE OF TUNISIAN CLAYS ON THE PROPERTIES OF GEOPOLYMERS

Geopolymers are amorphous three dimensional aluminosilicate materials that may be synthesized at room or slightly higher temperature by alkaline activation of aluminosilicates obtained from industrial wastes, calcined clays and natural minerals. Among the different family of geopolymers, two Tunisian clays (a kaolinite clay from Tabarka and illito/kaolinitic clay from Medenine) are tested for their feasibility of geopolymers at low temperature. The unfired and calcined clays were dissolved in strongly alkaline solution in order to produce consolidated materials whose pastes were characterized by their compressive strength. Hardened geopolymer samples were also submitted to X-Ray diffraction, FTIR spectroscopy and scanning electron microscopy analyses. The geopolymer strength is related to the structure and reactivity of the clay generated by thermal treatment and to the role of associated minerals in clays. The amorphous character of obtained geopolymers and the displacement of the IR wavenumber are signature of geopolymerisation reaction

Mesenchymal stem cell-based therapy for ischemic stroke

Ischemic stroke represents a major, worldwide health burden with increasing incidence. Patients affected by ischemic strokes currently have few clinically approved treatment options available. Most currently approved treatments for ischemic stroke have narrow therapeutic windows, severely limiting the number of patients able to be treated. Mesenchymal stem cells represent a promising novel treatment for ischemic stroke. Numerous studies have demonstrated that mesenchymal stem cells functionally improve outcomes in rodent models of ischemic stroke. Recent studies have also shown that exosomes secreted by mesenchymal stem cells mediate much of this effect. In the present review, we summarize the current literature on the use of mesenchymal stem cells to treat ischemic stroke. Further studies investigating the mechanisms underlying mesenchymal stem cells tissue healing effects are warranted and would be of benefit to the field

Contrasting sea-surface responses between the western Mediterranean Sea and eastern subtropical latitudes of the North Atlantic during abrupt climatic events of MIS 3

EuroCLIMATE project RESOLuTIONInternational audienceAbstract Dinoflagellate cyst (dinocyst) analysis was conducted on two cores from the SW Iberian margin and central Alboran Sea from which high quality records of Marine Isotope Stage 3 have been previously derived. Our aim in this study is to compare the dinocyst signature between 50 and 25 ka BP with existing datasets of foraminiferal and geochemical proxies related to hydrological parameters. Quantitative reconstructions of sea-surface temperatures (SSTs) and salinities (SSS) based on dinocysts are performed for the first time in this area. The results are compared to SSTs derived from planktonic foraminifera and alkenone measurements, and to SSS calculated from planktonic δ18O and foraminiferal SST. Significant oscillations related to Dansgaard-Oeschger cycles are recorded in both cores. Dinocyst-derived hydrological parameters exhibit synchronous fluctuations and similar values to those derived from the other methods, in particular when considering quantitative reconstructions for February based on foraminifera and dinocysts. Our study shows that the influence of subpolar waters was felt during each Greenland Stadial (GS) off Portugal, and that the amplification of the Heinrich Stadial cooling in the Alboran Sea was related to the penetration of subpolar waters through the Strait of Gibraltar. During Greenland Interstadials (GI), we provide evidence for the occurrence of warm and nutrient-rich sea-surface waters in the Alboran Sea, probably due to gyre-induced upwelling. Finally, the difference between August and February dinocyst SST estimates suggests higher seasonal contrasts during GS compared to GI at the two core sites. Additionally, precession appears to have an imprint on dinocyst-derived long-term seasonality record. However, this observation needs to be confirmed by longer records. Research Highlights ► We provide new dinocyst data on core MD95-2043 (Alboran Sea) during MIS 3. ► Quantitative dinocyst sea-surface parameters (SST, SSS) are reconstructed. ► A multi-proxies compilation (microfossils, alkenones, isotopes) is established. ► This dataset has been compared with the one of a SW Iberian margin core. ► Millennial-scale climatic variability is perfectly apparent from each side of Gibraltar

Patiromer to Enable Spironolactone Use in the Treatment of Patients with Resistant Hypertension and Chronic Kidney Disease: Rationale and Design of the AMBER Study

BACKGROUND: While chronic kidney disease (CKD) is common in resistant hypertension (RHTN), prior studies -evaluating mineralocorticoid receptor antagonists excluded patients with reduced kidney function due to risk of hyperkalemia. AMBER (ClinicalTrials.gov identifier NCT03071263) will evaluate if the potassium-binding polymer patiromer used concomitantly with spironolactone in patients with RHTN and CKD prevents hyperkalemia and allows more persistent spironolactone use for hypertension management. METHODS: Randomized, double-blind, placebo-controlled parallel group 12-week study of patiromer and spironolactone versus placebo and spironolactone in patients with uncontrolled RHTN and CKD. RHTN is defined as unattended systolic automated office blood pressure (AOBP) of -135-160 mm Hg during screening despite taking ≥3 antihypertensives, including a diuretic, and an angiotensin-converting enzyme inhibitor or an angiotensin receptor blocker -(unless not tolerated or contraindicated). The CKD inclusion criterion is an estimated glomerular filtration rate (eGFR) of 25 to ≤45 mL/min/1.73 m2. Screening serum potassium must be 4.3-5.1 mEq/L. The primary efficacy endpoint is the between-group difference (spironolactone plus patiromer versus spironolactone plus placebo) in the proportion of patients remaining on spironolactone at Week 12. RESULTS: Baseline characteristics have been analyzed as of March 2018 for 146 (of a targeted 290) patients. Mean (SD) baseline age is 69.3 (10.9) years; 52.1% are male, 99.3% White, and 47.3% have diabetes. Mean (SD) baseline serum potassium is 4.68 (0.25) mEq/L, systolic AOBP is 144.3 (6.8) mm Hg, eGFR is 35.7 (7.7) mL/min/1.73 m2. CONCLUSION: AMBER will define the ability of patiromer to facilitate the use of spironolactone, an effective antihypertensive therapy for patients with RHTN and CKD

Impact of Hyperkalemia and Worsening Renal Function on the Use of Renin Angiotensin Aldosterone System Inhibitors in Chronic Heart Failure With Reduced Ejection Fraction

Peer Reviewedhttps://deepblue.lib.umich.edu/bitstream/2027.42/138255/1/cpt746.pdfhttps://deepblue.lib.umich.edu/bitstream/2027.42/138255/2/cpt746_am.pd

Evolution of central pattern generators for the control of a five-link bipedal walking mechanism

Central pattern generators (CPGs), with a basis is neurophysiological studies, are a type of neural network for the generation of rhythmic motion. While CPGs are being increasingly used in robot control, most applications are hand-tuned for a specific task and it is acknowledged in the field that generic methods and design principles for creating individual networks for a given task are lacking. This study presents an approach where the connectivity and oscillatory parameters of a CPG network are determined by an evolutionary algorithm with fitness evaluations in a realistic simulation with accurate physics. We apply this technique to a five-link planar walking mechanism to demonstrate its feasibility and performance. In addition, to see whether results from simulation can be acceptably transferred to real robot hardware, the best evolved CPG network is also tested on a real mechanism. Our results also confirm that the biologically inspired CPG model is well suited for legged locomotion, since a diverse manifestation of networks have been observed to succeed in fitness simulations during evolution.Comment: 11 pages, 9 figures; substantial revision of content, organization, and quantitative result

Characterization of an Ionization Readout Tile for nEXO

A new design for the anode of a time projection chamber, consisting of a charge-detecting "tile", is investigated for use in large scale liquid xenon detectors. The tile is produced by depositing 60 orthogonal metal charge-collecting strips, 3~mm wide, on a 10~\si{\cm} $\times$ 10~\si{\cm} fused-silica wafer. These charge tiles may be employed by large detectors, such as the proposed tonne-scale nEXO experiment to search for neutrinoless double-beta decay. Modular by design, an array of tiles can cover a sizable area. The width of each strip is small compared to the size of the tile, so a Frisch grid is not required. A grid-less, tiled anode design is beneficial for an experiment such as nEXO, where a wire tensioning support structure and Frisch grid might contribute radioactive backgrounds and would have to be designed to accommodate cycling to cryogenic temperatures. The segmented anode also reduces some degeneracies in signal reconstruction that arise in large-area crossed-wire time projection chambers. A prototype tile was tested in a cell containing liquid xenon. Very good agreement is achieved between the measured ionization spectrum of a $^{207}$Bi source and simulations that include the microphysics of recombination in xenon and a detailed modeling of the electrostatic field of the detector. An energy resolution $\sigma/E$=5.5\% is observed at 570~\si{keV}, comparable to the best intrinsic ionization-only resolution reported in literature for liquid xenon at 936~V/\si{cm}.Comment: 18 pages, 13 figures, as publishe

Nanomechanical probing of the layer/substrate interface of an exfoliated InSe sheet on sapphire

Van der Waals (vdW) layered crystals and heterostructures have attracted substantial interest for potential applications in a wide range of emerging technologies. An important, but often overlooked, consideration in the development of implementable devices is phonon transport through the structure interfaces. Here we report on the interface properties of exfoliated InSe on a sapphire substrate. We use a picosecond acoustic technique to probe the phonon resonances in the InSe vdW layered crystal. Analysis of the nanomechanics indicates that the InSe is mechanically decoupled from the substrate and thus presents an elastically imperfect interface. A high degree of phonon isolation at the interface points toward applications in thermoelectric devices, or the inclusion of an acoustic transition layer in device design. These findings demonstrate basic properties of layered structures and so illustrate the usefulness of nanomechanical probing in nanolayer/nanolayer or nanolayer/substrate interface tuning in vdW heterostructures