Non-radiative energy losses in bulk-heterojunction organic photovoltaics

The performance of solar cells based on molecular electronic materials is limited by relatively high nonradiative voltage losses. The primary pathway for nonradiative recombination in organic donor-acceptor heterojunction devices is believed to be the decay of a charge-transfer (CT) excited state to the ground state via energy transfer to vibrational modes. Recently, nonradiative voltage losses have been related to properties of the charge-transfer state such as the Franck-Condon factor describing the overlap of the CT and ground-state vibrational states and, therefore, to the energy of the CT state. However, experimental data do not always follow the trends suggested by the simple model. Here, we extend this recombination model to include other factors that influence the nonradiative decay-rate constant, and therefore the open-circuit voltage, but have not yet been explored in detail. We use the extended model to understand the observed behavior of series of small molecules:fullerene blend devices, where open-circuit voltage appears insensitive to nonradiative loss. The trend could be explained only in terms of a microstructure-dependent CT-state oscillator strength, showing that parameters other than CT-state energy can control nonradiative recombination. We present design rules for improving open-circuit voltage via the control of material parameters and propose a realistic limit to the power-conversion efficiency of organic solar cells

Transcutaneous tibial nerve stimulation: 2 years follow-up outcomes in the management of anticholinergic refractory overactive bladder

PURPOSE: To evaluate long-term use, efficacy and tolerability of transcutaneous tibial nerve stimulation (TTNS) in the treatment of refractory overactive bladder (OAB). METHODS: We performed a prospective observational study and included all patients treated in a single center for OAB persisting after first-line anticholinergic treatment, with ≥ 24 months follow-up. The protocol consisted of daily stimulation at home. The primary outcome was treatment persistence. Amelioration was defined as an improvement in urinary symptom profile (USP) score. RESULTS: We assessed 84 consecutive patients. After a mean follow-up of 39.3 months and a mean treatment use of 8.3 months, almost two-thirds of patients (71.8%) had discontinued TTNS. Treatment continuation was > 12 months for 28 patients (33.3%) and > 18 months for 16 patients (19%). TTNS was successful following 3 months of treatment in 60 (71%) patients. Mean USP score stayed significantly lower than baseline until 12 months of treatment, but was not significant anymore after 18 months. Discontinuation therapy reasons were a lack of sufficient symptom relief for 59 (70%) patients, compliance difficulty for 5 (6%) patients and becoming asymptomatic for 6 (8%) patients. No serious adverse events occurred. CONCLUSIONS: The present study confirms the utility of TTNS as a treatment option for patients with resistant OAB. In the long-term use, few patients continued with therapy, mostly because of a decreased effectiveness with time

Improved Photocatalyzed Degradation of Phenol, as a Model Pollutant, over Metal-Impregnated Nanosized TiO₂

[Abstract] Photocatalyzed degradation of phenol in aqueous solution over surface impregnated TiO₂ (M = Cu, Cr, V) under UV-Vis (366 nm) and UV (254 nm) irradiation is described. Nanosized photocatalyts were prepared from TiO₂-P25 by wet impregnation, and characterized by X-ray diffraction, X-ray fluorescence, transmission electron microscopy, UV-Vis diffuse reflectance spectroscopy, Raman spectroscopy, and adsorption studies. No oxide phases of the metal dopants were found, although their presence in the TiO₂-P25 lattice induces tensile strain in Cu-impregnated TiO₂-P25, whereas compressive strain in Cr- and V-impregnated TiO₂-P25. Experimental evidences support chemical and mechanical stability of the photocatalysts. Type IV N₂ adsorption–desorption isotherms, with a small H3 loop near the maximum relative pressure were observed. Metal surface impregnated photocatalysts are mesoporous with a similar surface roughness, and a narrow pore distribution around ca. 25 Å. They were chemically stable, showing no metal lixiviation. Their photocatalytic activity was followed by UV-Vis spectroscopy and HPLC–UV. A first order kinetic model appropriately fitted the experimental data. The fastest phenol degradation was obtained with M (0.1%)/TiO₂-P25, the reactivity order being Cu > V >> Cr > TiO₂-P25 under 366 nm irradiation, while TiO₂-P25 > Cu > V > Cr, when using 254 nm radiation. TOC removal under 366 nm irradiation for 300 min showed almost quantitative mineralization for all tested materials, while 254 nm irradiation for 60 min led to maximal TOC removal (ca. 30%). Photoproducts and intermediate photoproducts were identified by HPLC–MS, and appropriate reaction pathways are proposed. The energy efficiency of the process was analysed, showing UV lamps are superior to UVA lamps, and that the efficiency of the surface impregnated catalyst varies in the order Cu > V > Cr.This research was partially supported by the Group of Chemical Reactivity & Photoreactivity at University and funded by the Spanish Ministerio de Economía y Competitividad through project CTQ2015-71238-R (MINECO/FEDER), and the regional government Xunta de Galicia (Project Grupo Potencial Crecemento (GPC) ED431B 2017/59), respectivelyXunta de Galicia; ED431B 2017/5

Hybridization of Local Exciton and Charge-Transfer States Reduces Non-Radiative Voltage Losses in Organic Solar Cells

A number of recent studies have shown that the non-radiative voltage losses in organic solar cells can be suppressed in systems with low energetic offsets between donor and acceptor molecular states, but the physical reasons underpinning this remain unclear. Here, we present a systematic study of 18 different donor:acceptor blends to determine the effect that energetic offset has on both radiative and non-radiative recombination of the charge transfer (CT) state. We find that for certain blends, low offsets result in hybridization between charge-transfer and lowest donor or acceptor exciton states, which leads to a strong suppression in the non-radiative voltage loss to values as low as 0.23V associated with an increase in the luminescence of the CT state. Further, we extend a two-state CT-state recombination model to include the interaction between CT and first excited states, which allows us to explain the low non-radiative voltage losses as an increase in the effective CT to ground state oscillator strength due to the intensity borrowing mechanism. We show that low non‐radiative voltage losses can be achieved in material combinations with a strong electronic coupling between CT and first excited states, and where the lower band gap material has a high oscillator strength for transitions from the excited state to the ground state. Finally, from our model we propose that achieving very low non-radiative voltage losses may come at a cost of higher overall recombination rates, which may help to explain the generally lower FF and EQE of highly hybridized systems

Cobalt Impregnation on Titania Photocatalysts Enhances Vis Phenol Photodegradation

This article belongs to the Special Issue Advanced Catalysts for Energy and Environmental Applications[Abstract] One of the main challenges of photocatalysis is to find a stable and effective photocatalyst, that is active and effective under sunlight. Here, we discuss the photocatalytic degradation of phenol as a model pollutant in aqueous solution using NUV-Vis (>366 nm) and UV (254 nm) in the presence of TiO2-P25 impregnated with different concentrations of Co (0.1%, 0.3%, 0.5%, and 1%). The modification of the surface of the photocatalyst was performed by wet impregnation, and the obtained solids were characterized using X-ray diffraction, XPS, SEM, EDS, TEM, N2 physisorption, Raman and UV-Vis DRS, which revealed the structural and morphological stability of the modified material. BET isotherms are type IV, with slit-shaped pores formed by nonrigid aggregate particles and no pore networks and a small H3 loop near the maximum relative pressure. The doped samples show increased crystallite sizes and a lower band gap, extending visible light harvesting. All prepared catalysts showed band gaps in the interval 2.3–2.5 eV. The photocatalytic degradation of aqueous phenol over TiO2-P25 and Co(X%)/TiO2 was monitored using UV-Vis spectrophotometry: Co(0.1%)/TiO2 being the most effective with NUV-Vis irradiation. TOC analysis showed ca. 96% TOC removal with NUV-Vis radiation, while only 23% removal under UV radiation.This research received support through grant TED2021-132667B-I00, funded by the EU NextGenerationEU/PRTR through project MCIN/AEI/10.13039/501100011033. Financial support was also provided by the regional government Xunta de Galicia through project GPC/ED431B 2020/52. S.B. thanks the KA-107 grant received from the EU through the Erasmus+ program for a research stay at UDCXunta de Galicia; ED431B 2020/5

Structure Dependence of Kinetic and Thermodynamic Parameters in Singlet Fission Processes

Singlet fission—whereby one absorbed photon generates two coupled triplet excitons—is a key process for increasing the efficiency of optoelectronic devices by overcoming the Shockley–Queisser limit. A crucial parameter is the rate of dissociation of the coupled triplets, as this limits the number of free triplets subsequently available for harvesting and ultimately the overall efficiency of the device. Here we present an analysis of the thermodynamic and kinetic parameters for this process in parallel and herringbone dimers measured by electron paramagnetic resonance spectroscopy in coevaporated films of pentacene in p-terphenyl. The rate of dissociation is higher for parallel dimers than for their herringbone counterparts, as is the rate of recombination to the ground state. DFT calculations, which provide the magnitude of the electronic coupling as well as the distribution of molecular orbitals for each geometry, suggest that weaker triplet coupling in the parallel dimer is the driving force for faster dissociation. Conversely, localization of the molecular orbitals and a stronger triplet–triplet interaction result in slower dissociation and recombination. The identification and understanding of how the intermolecular geometry promotes efficient triplet dissociation provide the basis for control of triplet coupling and thereby the optimization of one important parameter of device performance

TOOKAD® Soluble focal therapy: pooled analysis of three phase II studies assessing the minimally invasive ablation of localized prostate cancer

Purpose: To evaluate the 6-month effects of the recommended drug and light dosage in focal vascular-targeted photodynamic therapy (VTP) using TOOKAD® Soluble in patients with localized prostate cancer (LPCa). Methods: We performed a pooled analysis of 117 men with LPCa, PSA <10 ng/mL, and Gleason score ≤7 (3 + 4), from 3 studies who received a 10-min intravenous infusion of a single dose of 4 mg/kg TOOKAD® Soluble, activated by a 753-nm light at 200 J/cm delivered in the prostate by transperineal fibres under transrectal ultrasound guidance. Primary endpoint was 6-month negative biopsies in the treated lobe(s). PSA was measured at month 1, 3, and 6. Magnetic resonance imaging was performed at day 7, month 3, and 6. International Prostate Symptom Score (IPSS), International Index of Erectile Function (IIEF-5) and adverse events were reported at day 7, month 1, 3, and 6. Results: Month 6 negative biopsy rate was 68.4 % in the overall evaluable population (N = 114) and 80.6 % for patients treated by hemiablation with light density index (LDI) ≥ 1 (N = 67). Mean prostate necroses at week-1 were 76.5 and 86.3 %, respectively. In both groups, PSA levels at month 6 decreased by 2.0 ng/mL. Small changes from baseline for IPSS and IIEF-5 indicated a slight improvement in urinary function and a slight deterioration in sexual function. Conclusions: Focal VTP treatment with TOOKAD® Soluble at 4 mg/kg and 200 J/cm resulted in a negative 6-month biopsy rate of 68.4 % for the whole population and 80.6 % for patients treated by hemiablation with LDI ≥ 1. The treatment was well tolerated. Two phase III studies will reach completion in early 2015

MEK1 Inhibits Cardiac PPARα Activity by Direct Interaction and Prevents Its Nuclear Localization

BACKGROUND: The response of the postnatal heart to growth and stress stimuli includes activation of a network of signal transduction cascades, including the stress activated protein kinases such as p38 mitogen-activated protein kinase (MAPK), c-Jun NH2-terminal kinase (JNK) and the extracellular signal-regulated kinase (ERK1/2) pathways. In response to increased workload, the mitogen-activated protein kinase kinase (MAPKK) MEK1 has been shown to be active. Studies embarking on mitogen-activated protein kinase (MAPK) signaling cascades in the heart have indicated peroxisome-proliferators activated-receptors (PPARs) as downstream effectors that can be regulated by this signaling cascade. Despite the importance of PPARα in controlling cardiac metabolism, little is known about the relationship between MAPK signaling and cardiac PPARα signaling. METHODOLOGY/PRINCIPAL FINDING: Using co-immunoprecipitation and immunofluorescence approaches we show a complex formation of PPARα with MEK1 and not with ERK1/2. Binding of PPARα to MEK1 is mediated via a LXXLL motif and results in translocation from the nucleus towards the cytoplasm, hereby disabling the transcriptional activity of PPARα. Mice subjected to voluntary running-wheel exercise showed increased cardiac MEK1 activation and complex formation with PPARα, subsequently resulting in reduced PPARα activity. Inhibition of MEK1, using U0126, blunted this effect. CONCLUSION: Here we show that activation of the MEK1-ERK1/2 pathway leads to specific inhibition of PPARα transcriptional activity. Furthermore we show that this inhibitory effect is mediated by MEK1, and not by its downstream effector kinase ERK1/2, through a mechanism involving direct binding to PPARα and subsequent stimulation of PPARα export from the nucleus

Formation of Pyrazol-1,3,4-Thiadiazoles through 1,3-Dipolar Cycloadditions of 3-Thioxo-[1,2,4]-Triazepin-5-one with Nitrilimines: An Experimental and Computational study

In this work the results of experimental and computational study of the title compounds and some ancillary compounds are reported. Two bicyclic pyrazol-1,3,4-thiadiazole derivatives were synthesized by reaction between 6-dimethylaminomethylene-3-thioxo-[1,2,4]- triazepin-5-one 1 and several nitrilimines 2a-f to give corresponding spirocycloadducts 3a-f, which undergo a rapid rearrangement leading to the new bicyclic compounds, 4a-f and 5a-f. These obtained bicyclic products were characterized by 1H and 13C NMR spectroscopy and finally by X-ray crystallography. Theoretical calculations have been carried out using DFT methods to rationalize the formation of the two new bicyclic compounds. Two reaction types are involved in the formation of the compounds 4a-f and 5a-f. The first one is a 1,3-dipolar cycloaddition reaction between 1 acting as dipolarophile and 2a-f as dipoles. The results indicate that the cycloaddition between 1 and 2g, as model of 2a-c, takes place via a high asynchronous bond-formation process. The regioselectivity obtained from the calculations is in complete agreement with the formation of the unique spirocycloadducts 3a-f. The second reaction leading to the formation of the final products is a domino process that is initiated by the quick and irreversible cleavage in a catalytic acid environment of triazepenic ring

Impact of Marginal Exciton-Charge-Transfer State Offset on Charge Generation and Recombination in Polymer:Fullerene Solar Cells

The energetic offset between the initial photoexcited state and charge-transfer (CT) state in organic heterojunction solar cells influences both charge generation and open-circuit voltage (Voc). Here, we use time-resolved spectroscopy and voltage loss measurements to analyze the effect of the exciton–CT state offset on charge transfer, separation, and recombination processes in blends of a low-band-gap polymer (INDT-S) with fullerene derivatives of different electron affinity (PCBM and KL). For the lower exciton–CT state offset blend (INDT-S:PCBM), both photocurrent generation and nonradiative voltage losses are lower. The INDT-S:PCBM blend shows different excited-state dynamics depending on whether the donor or acceptor is photoexcited. Surprisingly, the charge recombination dynamics in INDT-S:PCBM are distinctly faster than those in INDT-S:KL upon excitation of the donor. We reconcile these observations using a kinetic model and by considering hybridization between the lowest excitonic and CT states. The modeling results show that this hybridization can significantly reduce Voc losses while still allowing reasonable charge generation efficiency