Characterization Of oil/ gas flow pattern in vertical pipes using electrical capacitance tomography

Electrical Capacitance Tomography provides the opportunity to visualize the contents of a process of many applications such as pipeline and obtain information on the flow configuration. Multiphase flow is an extremely complex field of fluid mechanics; the characteristics of the operations of many equipmentin different areas of industry such as oil and power generation are determined by the nature of flow of two phase or multiphase. In this study, a twin plane Electrical capacitance tomography (ECT) electrode was designed, fabricated and used to image and characterize oil/gas flow in 67 mm pipe. The experiments were carried out in inclinable facility in the Department of Chemical Engineering at Nottingham University, UK. Conditions used are gas superficial velocities of 0.05 to 5.52 m/s and liquid superficial velocities of 0 to 0.54 m/s. The cross-section averaged void fraction and its variation in time were measured using electrical capacitance tomography. Also, Probability Density Functions are demonstrated and the structure velocity of flow is presented as well. In this project, Bubbly, slug, and churn flow configurations was observed. In addition, high speed video images of flow were obtained simultaneously and compared with tomographic images of the ECT system

Small bubbles formation and contribution to the overall gas holdup in large diameter columns of very high viscosity oil

A limited number of studies are available in literature on the small bubbles which create from gas-very high viscosity oils interaction and its contribution to the gas holdup in the system. The rate of small bubble formation has an important impact on heat and mass transfer in many chemical and industrial processes. The work presented in the current paper provides unique information on the formation of bubbles of millimetre diameter in high viscosity oil. A column of 290 mm diameter and Silicon oil of 330 Pa.s viscosity, were employed besides Electrical Capacitance Tomography and a high-resolution camera to investigate the characteristics of the small bubbles. Mechanism of bubble generation, effect of gas injection time and flowrate were studied. The average void fraction, total gas-liquid height, overall Probability Density Function (PDF) profile, small bubbles volume fractions and diameter were measured. Small bubbles generate from the eruption of large bubbles, at gas injection nozzles, coalescence of large bubbles, and at liquid bridges at transition to churn flow regime. Properties and concentration of the small bubbles are controlled by the location of the bubble generation, gas flowrate, and gas injection time. Small bubbles contribute by 6.6- 30% to the total gas holdup. Bubble diameter increased from 0.68 mm to 0.75 mm and decreased from 1.1 mm to 0.75 mm at the top and the bottom sections of the column respectively after 60 minof gas injection

Applications of Artificial Neural Network (ANN) method for performance prediction of the effect of a vertical 90° bend on an air-silicone oil flow

Knowledge of how the presence of a bend can change the flow patterns of a gas–liquid mixture is important for the design of multiphase flow systems, particularly to prevent burn-out and erosion–corrosion. Burn-out and erosion–corrosion both have serious implications for heat and mass transfer. The objective of this work therefore is to train an artificial neural network (ANN), a powerful interpolation technique, to predict the effect of a vertical 90o bend on an air–silicone oil mixture over a wide range of flow rates. Experimental data for training, validation, testing and final prediction were obtained using advanced instrumentation, wire mesh sensor (WMS) and high speed camera. The performance of the models were evaluated using the mean square error (MSE), average absolute relative error (MAE), Chi square test (X2) and cross correlation coefficients (R). The performance discriminator X2 for prediction of average void fraction is 2.57e-5 and that for probability density function (PDF) of void fraction MAE is 0.0028 for best performing models. The well trained ANN is then used to predict the effects of the two input parameters individually. The predicted results show that for the before the bend scenario, the most effective input parameter that reflects a change in flow pattern is the gas superficial velocity. On the other hand, the most unfavourable output parameter to measure after the bend is the average void fraction based on the fact that the flow near the bend is a developing one

Experimental study of the hydrodynamic behaviour of slug flow in a vertical riser

This paper presents an investigation of the hydrodynamics of slug flow in a vertical 67 mm internal diameter riser. The slug flow regime was generated using a multiphase air–silicone oil mixture over a range of gas (0.42<USG<1.35 m/s) and liquid (0.05<USL<0.38 m/s) superficial velocities. Electrical capacitance tomography (ECT) was used to determine: the velocities of the Taylor bubbles and liquid slugs, the slug frequencies, the lengths of Taylor bubbles and the liquid slugs, the void fractions within the Taylor bubbles and liquid slugs and the liquid film thicknesses. A differential pressure transducer was used to measure the pressure drops along the length of the riser. It was found that the translational velocity of a Taylor bubble (the structure velocity) was strongly dependent on the mixture superficial velocity. As the gas superficial velocity, was increased, the void fraction and the lengths of the liquid slugs and the Taylor bubbles were observed to increase. The increase in gas superficial velocity causes an increase in the frictional pressure drop within the pipe, whilst the total pressure drop (which is a sum of the hydrostatic and frictional pressure drop) along the length of the riser decreases. In addition, the frequencies of the liquid slugs were observed to increase as the liquid superficial velocity increases, but to be weakly dependant on the gas superficial velocity. The manual counting method for the determination of slug frequency was found to be in good agreement with the power spectral density (PSD) computed method

The properties of large bubbles rising in very viscous liquids in vertical columns

Very viscous liquids (>100 Pa s) are found in form of heavy oils and polymers in industry as well as in the natural environment (silicatic magma). Little is known of their behaviour as gas bubbles up through them in vertical columns. Using advanced tomographic instrumentation, the characteristics of these flows have been quantified. It was found that: the gas mainly travels as very large bubbles which occupy a significant part of the column cross-section and that very small bubbles (~100 lm) are created and trapped within the liquid. There is a periodic rising and falling of the top surface of the gas/liquid column as the large bubbles rise to the top and burst

Dynamics of flow transitions from bubbly to churn flow in high viscosity oils and large diameter columns

The dynamic behaviour of the gas-liquid two phase flows and in particular the flow pattern stability and transition between the flow regimes are influenced significantly by both the properties of the liquid and gas as well as the pipe diameter. The majority of the studies reported in the literature on the dynamics of gas-liquid flow transitions focus only on low viscosity liquids (e.g. water) and small diameter pipes. In the present work a series of experiments were carried out to study the dynamics of flow transitions (bubbly to slug and slug to churn) of gas rising through very viscous oils (330 Pa s and 360 Pa s) in two large diameter columns (290 and 240 mm, respectively), using Electrical Capacitance Tomography (ECT) and pressure sensors. The experiments aimed to imitate a number of realistic flow conditions that might be encountered, for examples, in; bitumen, crude oil, viscous liquids in food processing and volcanic magmatic flows. Observation and quantification of bubbly to slug and slug to churn flow transitions for gas-high viscous liquids in large pipe diameters are presented for the first time. Flow parameters and characteristics including; void fraction, pressure gradient, Probability Density Function, structure velocity, lengths of large/Taylor bubbles and liquid slugs and the effect of liquid temperature on the void fraction and Taylor bubble lengths, were measured and analysed. It was found that transition to slug and churn flow occurs gradually. Transition to slug flow occurs at a gas superficial velocity of 0.011 m/s–0.016 m/s, while transition to churn appears in the range of 0.127–0.243 m/s in both columns

Gas rising through a large diameter column of very viscous liquid: Flow patterns and their dynamic characteristics

Gas-liquid flows are affected strongly by both the liquid and gas properties and the pipe diameter, which control features and the stability of flow patterns and their transitions. For this reason, empirical models describing the flow dynamics can be applied only to limited range of conditions. Experiments were carried out to study the behaviour of air passing through silicone oil (360 Pa.s) in 240 mm diameter bubble column using Electrical Capacitance Tomography and pressure transducers mounted on the wall. These experiments are aimed at reproducing expected conditions for flows including (but not limited to) crude oils, bitumen, and magmatic flows in volcanic conduits. The paper presents observation and quantification of the flow patterns present. It particularly provides the characteristics of gas-liquid slug flows such as: void fraction; Taylor bubble velocity; frequency of periodic structures; lengths of liquid slugs and Taylor bubbles. An additional flow pattern, churn flow, has been identified. The transition between slug and churn has been quantified and the mechanism causing it are elucidated with the assistance of a model for the draining of the liquid film surrounding the Taylor bubble once this has burst through the top surface of the aerated column of gas-liquid mixture. It is noted that the transition from slug to churn is gradual

Study of the impacts of droplets deposited from the gas core onto a gas-sheared liquid film

The results of an experimental study on droplet impactions in the flow of a gas-sheared liquid film are presented. In contrast to most similar studies, the impacting droplets were entrained from film surface by the gas stream. The measurements provide film thickness data, resolved in both longitudinal and transverse coordinates and in time together with the images of droplets above the interface and images of gas bubbles entrapped by liquid film. The parameters of impacting droplets were measured together with the local liquid film thickness. Two main scenarios of droplet-film interaction, based on type of film perturbation, are identified; the parameter identifying which scenario occurs is identified as the angle of impingement. At large angles an asymmetric crater appears on film surface; at shallow angles a long, narrow furrow appears. The most significant difference between the two scenarios is related to possible impact outcome: craters may lead to creation secondary droplets, whereas furrows are accompanied by entrapment of gas bubbles into the liquid film. In addition, occurrence of partial survival of impacting droplet is reported

Study of gas-sheared liquid film in horizontal rectangular duct using high-speed LIF technique: Three-dimensional wavy structure and its relation to liquid entrainment

© 2014 The Authors. The flow of a liquid film sheared by high velocity gas stream in a horizontal rectangular duct was investigated using a high-speed laser-induced fluorescence technique. Measurements of local film thickness were resolved in both longitudinal and transverse coordinates with high spatial and temporal resolution. It was found that the generation of fast and slow ripples by the disturbance waves was qualitatively the same as it was observed earlier in completely different conditions. The transverse size and curvature of the disturbance waves and ripples were measured. A relationship between the three-dimensional structure of ripples on top of disturbance waves and the two mechanisms of liquid entrainment, known as 'bag break-up' and 'ligament break-up', is proposed