87 research outputs found

    Effect of Attack angle on Aerodynamics Analysis of Different Wind Turbine Wings using Numerical Simulation

    Get PDF
    In this research, the performance of two airfoils are compared by using Numerical analysis. There are so many dedicated airfoils to be used in various kinds of wind turbine blades. The lift coefficient and drag coefficient are the key parameters to determine the airfoil performance. The right choice of airfoil gives good performance in wind turbine blade design based on the available wind velocity, Reynold number, blade material. The author wants to compare the performance of 3D model two airfoils (SG 6043 and NACA 4412) for low Reynold number; less than 500,000 [1]. The numerical simulation is carried out by using Ansys-Fluent software. The lift and drag coefficients are compared based on different angle of attack 0º, 5º, 10º at wind velocity 10m/s, rated wind velocity for intended regions. The design chord length is 0.5m and width of the wing is 0.25m. The numerical results are compared with the results of Profili 2.0c software. By doing this simulation, understand their flow nature and the performance of two airfoil profiles is compared. Therefore, the suitable airfoil will be used in local horizontal axis wind turbine industries.

    Numerical Investigation of Flow Profile and Performance Test of Cross-Flow Turbine

    Get PDF
    The paper refers to the numerical analysis of the two stages of inlet and outlet blades of cross-flow turbine. A Computational Fluid Dynamics (CFD) steady state flow simulation has been performed using ANSYS CFX 17. Numerical method has also been used to calculate and predict the efficiency of the turbine. Velocity distribution and within the flow domain has been also characterized. The simulation includes flow domain and blades. The turbine has a specific speed of 44 (metric units), an outside runner diameter of 150 mm. Simulations has been carried out using k-ε turbulence model. The objectives of this study were to analyze the velocity of the Cross-flow within the runner and to characterize its performance for different runner speeds. The CFD simulations results were compared with experimental data and were consistent with turbine efficiency

    In vitro study of Coronal Leakage of Four Temporary Filling Materials Immersed in Alcoholic Methylene Blue Dye

    Get PDF
    Abstract Introduction: Temporary restorative materials are placed in access cavity to provide the coronal seal of the root canal during multi-visits RCT. This in vitro study was designed to evaluate the coronal microleakage of four different temporary restorative materials commonly used in endodontics in Myanmar, viz., MD.Temp, Orafil, Caviton, Zinc oxide eugenol. Materials and Methods : Forty-four extracted human premolars were selected, and access cavity was prepared. Pulp chambers were filled with wet cotton pellets leaving approximately 4 mm coronally. Forty teeth were randomly divided into four experimental groups equally. The remaining four teeth were equally divided into two control groups. Access cavities in each group were filled with one of the above tested materials, and immediately put into the water. Tooth surfaces except occlusal surface were then coated with nail varnish. Equal parts of 2% methylene blue and methylated alcohol were mixed to prepare a dye solution. Samples were immersed in dye for 10 days at 32 ± 2°C. Teeth were rinsed, dried, and sectioned mesiodistally and evaluated under a stereomicroscope at a magnification of 15X for linear dye penetration along cavity walls. Data were analyzed using KruskalWallis and Tukey HSD tests. Results : The lowest microleakage value was observed in MD.Temp and Orafil, and the highest in Zinc oxide eugenol (ZOE). Caviton was not statistically different from Orafil and ZOE, but significantly higher in microleakage than MD.Temp. Clinical Significance : ZOE which is dissolvable in alcohol was the least effective material for preventing microleakage, while MD.Temp and Orafil provided the best sealing in content of alcohol in this study

    User Profiling for Search Engines’ Help Systems

    Get PDF
    The Help Systems information provided by search engines can facilitate or hinder its user’s information seeking process. This paper reports a study in how users would like to see search engines’ Help Systems to be organized and presented. Six aspects of Help Systems, including navigation, design elements, technical help, conceptual help, terminological, and strategic aspects, were used as the framework to develop questionnaire for further study in stereotyping search engine users. Overall users do not expect animations, videos and speech as part of a search engine’s Help System, technical help is desirable, and the navigation to find Help page and relevant content is important

    Statistical Machine Translation between Myanmar Sign Language and Myanmar Written Text

    Get PDF
    This paper contributes the first evaluation of the quality of automatic translation between Myanmar sign language (MSL) and Myanmar written text, in both directions. Our developing MSL-Myanmar parallel corpus was used for translations and the experiments were carried out using three different statistical machine translation (SMT) approaches: phrase-based, hierarchical phrase-based, and the operation sequence model. In addition, three different segmentation schemes were studies, these were syllable segmentation, word segmentation and sign unit based word segmentation. The results show that the highest quality machine translation was attained with syllable segmentations for both MSL and Myanmar written text

    Development of Natural Language Processing based Communication and Educational Assisted Systems for the People with Hearing Disability in Myanmar

    Get PDF
    Information and communication technologies (ICTs) provide people with disabilities to better integrate socially and economically into their communities by supporting access to information and knowledge, learning and teaching situations, personal communication and interaction. Our research purpose is to develop systems that will provide communication and educational assistance to persons with hearing disability using Natural Language Processing (NLP). In this paper, we present corpus building for Myanmar sign language (MSL), Machine Translation (MT) between MSL, Myanmar written text (MWT) and Myanmar SignWriting (MSW) and two Fingerspelling keyboard layouts for Myanmar SignWriting. We believe that the outcome of this research is useful for educational contents and communication between hearing disability and general people

    Late prehistoric and early historic chronology of Myanmar: a four-millennia sequence from Halin

    Get PDF
    Myanmar is located within an important geographic corridor of prehistoric demographic and technological exchange, yet relatively few archaeological sites have been securely dated. Here, the authors present a new radiocarbon chronology for Halin, a UNESCO-listed complex in the north-central Sagaing Division of Myanmar, which contributes to the generation of nuanced regional chronologies and to improving the temporal resolution of Southeast Asia more generally. Discussion of 94 radiocarbon determinates, together with site stratigraphy and pottery traditions, provides a chronological sequence from the early third millennium BC to the early second millennium AD. Corroboration of the beginning of this sequence would place Halin as the oldest currently dated Neolithic site in Mainland Southeast Asia and would provide support for the two-layer model of Neolithic migration

    2015年にミャンマー国で発生したデング熱流行の臨床、ウイルス学、疫学解析

    Get PDF
    Hospital-based surveillance was conducted at two widely separated regions in Myanmar during the 2015 dengue epidemic. Acute phase serum samples were collected from 332 clinically diagnosed dengue patients during the peak season of dengue cases. Viremia levels were measured by quantitative real-time PCR and plaque assays using FcγRIIA-expressing and non-FcγRIIA-expressing BHK cells to specifically determine the infectious virus particles. By serology and molecular techniques, 280/332 (84・3%) were confirmed as dengue patients. All four serotypes of dengue virus (DENV) were isolated from among 104 laboratory-confirmed patients including two cases infected with two DENV serotypes. High percentage of primary infection was noted among the severe dengue patients. Patients with primary infection or DENV IgM negative demonstrated significantly higher viral loads but there was no significant difference among the severity groups. Viremia levels among dengue patients were notably high for a long period which was assumed to support the spread of the virus by the mosquito vector during epidemic. Phylogenetic analyses of the envelope gene of the epidemic strains revealed close similarity with the strains previously isolated in Myanmar and neighboring countries. DENV-1 dominated the epidemic in 2015 and the serotype (except DENV-3) and genotype distributions were similar in both study sites.長崎大学学位論文 学位記番号:博(医歯薬)甲第984号 学位授与年月日:平成29年9月20日Author: A. K. KYAW, M. M. NGWE TUN, M. L. MOI, T. NABESHIMA, K. T. SOE, S. M. THWE, A. A. MYINT, K. T. T. MAUNG, W. AUNG, D. HAYASAKA, C. C. BUERANO, K. Z. THANT and K. MORITACitation: Epidemiology & Infection, 145(9), pp.1886-1897; 2017Nagasaki University (長崎大学)課程博
    corecore