1,605 research outputs found

    Validating delta-filters for resonant bar detectors of improved bandwidth foreseeing the future coincidence with interferometers

    Full text link
    The classical delta filters used in the current resonant bar experiments for detecting GW bursts are viable when the bandwidth of resonant bars is few Hz. In that case, the incoming GW burst is likely to be viewed as an impulsive signal in a very narrow frequency window. After making improvements in the read-out with new transducers and high sensitivity dc-SQUID, the Explorer-Nautilus have improved the bandwidth (∌20\sim 20 Hz) at the sensitivity level of 10−20/Hz10^{-20}/\sqrt{Hz}. Thus, it is necessary to reassess this assumption of delta-like signals while building filters in the resonant bars as the filtered output crucially depends on the shape of the waveform. This is presented with an example of GW signals -- stellar quasi-normal modes, by estimating the loss in SNR and the error in the timing, when the GW signal is filtered with the delta filter as compared to the optimal filter.Comment: 7 pages, presented in Amaldi6, accepted for publication in Journal of Physics: Conference Serie

    On the crosscorrelation between Gravitational Wave Detectors for detecting association with Gamma Ray Bursts

    Get PDF
    Crosscorrelation of the outputs of two Gravitational Wave (GW) detectors has recently been proposed [1] as a method for detecting statistical association between GWs and Gamma Ray Bursts (GRBs). Unfortunately, the method can be effectively used only in the case of stationary noise. In this work a different crosscorrelation algorithm is presented, which may effectively be applied also in non-stationary conditions for the cumulative analysis of a large number of GRBs. The value of the crosscorrelation at zero delay, which is the only one expected to be correlated to any astrophysical signal, is compared with the distribution of crosscorrelation of the same data for all non-zero delays within the integration time interval. This background distribution is gaussian, so the statistical significance of an experimentally observed excess would be well-defined. Computer simulations using real noise data of the cryogenic GW detectors Explorer and Nautilus with superimposed delta-like signals were performed, to test the effectiveness of the method, and theoretical estimates of its sensitivity compared to the results of the simulation. The effectiveness of the proposed algorithm is compared to that of other cumulative techniques, finding that the algorithm is particularly effective in the case of non-gaussian noise and of a large (100-1000s) and unpredictable delay between GWs and GRBs.Comment: 7 pages, 4 figures, 1 table. Submitted by Phys. Rev.

    Experimental Investigation of Magnetohydrodynamics Effects in Molten Metals and Study of Homogeneity of Radioactive Mercury Amalgams

    Get PDF
    The high neutrino output demanded for a neutri no factory requests a high power proton beam interacting with a static target. The additional circumstances of limited space and long term stability ask for development of novel concepts for such types of targets. In our working group, part of the Neutri no Factory Working Group (NFWG) of CERN, we are investigating on the proton interaction with the mercury target. This is called the study of proton induced shocks in molten metal. In the US scheme for a neutrino factory the interaction between proton beam and the mercury jet target takes place inside a 20 Tesla solenoidal magnetic field, which serv es as a focusing device for the produced particles. This field of study is refe rred to as Magneto Hydrodynamics (MHD). The high power proton beam deposits a large amount of energy in the small volume of the target, which results in disruption. The aim is to establish experiments to study this phenomenon and to quantify the impact on the overall design of the target area. Shooting a high intensity proton beam into a steady merc ury target is to subsequently observe the effects of the thermal shock induced by th e energy deposition in the material. This experiment is part of a global study over high power proton target, which includes also the experiment performed at BNL [9] in spri ng 2001 to achieve more detailed results and to use the different proton energy of 2.2 GeV. Experiments are requested in order to deliver bench marks for nu merical simulations [34]. The second part of the work aimed to investigate magneto-hydro-dynamic effects occurring in the target area. Injecting the li quid metal target at a speed of more than 10 m/s into a 20 Tesla solenoidal magnetic fi eld causes forces on the liquid. The repulsion and pinching of the liquid jet will be stud ied experimentally. Numerical simulations will be compared with these results [35]. By the superposition of results achieved from these two experiments the feasibility of using a liquid metal target for a neutrino factory will be derived. The third part of the thesis work concerns the development of a technique for radioactive mercury handling and disposal. A final design of a neutrino factory will produce a certain amount of radioactive mercury, which might be destined for disposal/storage. After separation of radioactive merc ury by distillation the radioac tive part could be stored. Storage could only be handled after solidif ication of it. The procedure chosen for solidification is to produce amalgam from th e radioactive mercury. Small quantities for justification of the method ar e available from experiments at ISOLDE. As the quantity of used mercury will be relevant, the procedure developed will become the starting point of a production of industrial scale

    Search for Periodic Gravitational Wave Sources with the Explorer Detector

    Get PDF
    We have developped a procedure for the search of periodic signals in the data of gravitational wave detectors. We report here the analysis of one year of data from the resonant detector Explorer, searching for pulsars located in the Galactic Center (GC). No signals with amplitude greater than hˉ=2.9 10−24\bar{h}= 2.9~10^{-24}, in the range 921.32-921.38 Hz, were observed using data collected over a time period of 95.7 days, for a source located at α=17.70±0.01\alpha=17.70 \pm 0.01 hours and ÎŽ=−29.00±0.05\delta=-29.00 \pm 0.05 degrees. Our procedure can be extended for any assumed position in the sky and for a more general all-sky search, even with a frequency correction at the source due to the spin-down and Doppler effects.Comment: One zipped file (Latex+eps figures). 33 pages, 14 figures. This and related material also at http://grwav3.roma1.infn.it

    Search for correlation between GRB's detected by BeppoSAX and gravitational wave detectors EXPLORER and NAUTILUS

    Get PDF
    Data obtained during five months of 2001 with the gravitational wave (GW) detectors EXPLORER and NAUTILUS were studied in correlation with the gamma ray burst data (GRB) obtained with the BeppoSAX satellite. During this period BeppoSAX was the only GRB satellite in operation, while EXPLORER and NAUTILUS were the only GW detectors in operation. No correlation between the GW data and the GRB bursts was found. The analysis, performed over 47 GRB's, excludes the presence of signals of amplitude h >=1.2 * 10^{-18}, with 95 % probability, if we allow a time delay between GW bursts and GRB within +-400 s, and h >= 6.5 * 10^{-19}, if the time delay is within +- 5 s. The result is also provided in form of scaled likelihood for unbiased interpretation and easier use for further analysis.Comment: 14 pages, 7 figures. Latex file, compiled with cernik.cls (provided in the package

    All-sky upper limit for gravitational radiation from spinning neutron stars

    Full text link
    We present results of the all-sky search for gravitational-wave signals from spinning neutron stars in the data of the EXPLORER resonant bar detector. Our data analysis technique was based on the maximum likelihood detection method. We briefly describe the theoretical methods that we used in our search. The main result of our analysis is an upper limit of 2×10−23{\bf 2\times10^{-23}} for the dimensionless amplitude of the continuous gravitational-wave signals coming from any direction in the sky and in the narrow frequency band from 921.00 Hz to 921.76 Hz.Comment: 12 pages, 4 figures, submitted to Proceedings of 7th Gravitational Wave Data Analysis Workshop, December 17-19, 2002, Kyoto, Japa

    Study of the coincidences between the gravitational wave detectors EXPLORER and NAUTILUS in 2001

    Get PDF
    We report the result from a search for bursts of gravitational waves using data collected by the cryogenic resonant detectors EXPLORER and NAUTILUS during the year 2001, for a total measuring time of 90 days. With these data we repeated the coincidence search performed on the 1998 data (which showed a small coincidence excess) applying data analysis algorithms based on known physical characteristics of the detectors. With the 2001 data a new interesting coincidence excess is found when the detectors are favorably oriented with respect to the Galactic Disk

    Gravitational wave bursts induced by r-mode spin-down of hybrid stars

    Get PDF
    We show that sudden variations in the composition and structure of an hybrid star can be triggered by its rapid spin-down, induced by r-mode instabilities. The discontinuity of this process is due to the surface tension between hadronic and quark matter and in particular to the overpressure needed to nucleate new structures of quark matter in the mixed phase. The consequent mini-collapses in the star can produce highly energetic gravitational wave bursts. The possible connection between the predictions of this model and the burst signal found by EXPLORER and NAUTILUS detectors during the year 2001 is also investigated.Comment: 9 pages, 8 figures, revised version, to be published in Astronomy & Astrophysic

    Data analysis of gravitational-wave signals from spinning neutron stars. IV. An all-sky search

    Get PDF
    We develop a set of data analysis tools for a realistic all-sky search for continuous gravitational-wave signals. The methods that we present apply to data from both the resonant bar detectors that are currently in operation and the laser interferometric detectors that are in the final stages of construction and commissioning. We show that with our techniques we shall be able to perform an all-sky 2-day long coherent search of the narrow-band data from the resonant bar EXPLORER with no loss of signals with the dimensionless amplitude greater than 2.8×10−232.8\times10^{-23}.Comment: REVTeX, 26 pages, 1 figure, submitted to Phys. Rev.

    Vibrational excitation induced by electron beam and cosmic rays in normal and superconductive aluminum bars

    Full text link
    We report new measurements of the acoustic excitation of an Al5056 superconductive bar when hit by an electron beam, in a previously unexplored temperature range, down to 0.35 K. These data, analyzed together with previous results of the RAP experiment obtained for T > 0.54 K, show a vibrational response enhanced by a factor 4.9 with respect to that measured in the normal state. This enhancement explains the anomalous large signals due to cosmic rays previously detected in the NAUTILUS gravitational wave detector.Comment: 28 pages, 13 figure
    • 

    corecore