3,015 research outputs found
Dual antibiotherapy of tuberculosis mediated by inhalable locust bean gum microparticles
Despite the existence of effective oral therapy, tuberculosis remains a deadly pathology, namely because of bacterial resistance and incompliance with treatments. Establishing alternative therapeutic approaches is urgently needed and inhalable therapy has a great potential in this regard. As pathogenic bacteria are hosted by alveolar macrophages, the co-localisation of antitubercular drugs and pathogens is thus potentiated by this strategy. This work proposes inhalable therapy of pulmonary tuberculosis mediated by a single locust bean gum (LBG) formulation of microparticles associating both isoniazid and rifabutin, complying with requisites of the World Health Organisation of combined therapy. Microparticles were produced by spray-drying, at LBG/INH/RFB mass ratio of 10/1/0.5. The aerodynamic characterisation of microparticles revealed emitted doses of more than 90% and fine particle fraction of 38%, thus indicating the adequacy of the system to reach the respiratory lung area, thus partially the alveolar region. Cytotoxicity results indicate moderate toxicity (cell viability around 60%), with a concentration-dependent effect. Additionally, rat alveolar macrophages evidenced preferential capture of LBG microparticles, possibly due to chemical composition comprising mannose and galactose units that are specifically recognised by macrophage surface receptors. (C) 2017 Elsevier B.V. All rights reserved.National Portuguese funding through FCT - Fundacao para a Ciencia e a Tecnologia [PTDC/DTP-FTO/0094/2012, UID/BIM/04773/2013, UID/Multi/04326/2013, UID/QUI/00100/2013, PEst-OE/QUI/UI4023/2011
Solid Waste Mixtures as Constructed Wetlands Filling: Effect of Hydraulic Loading Rate on Nutrient Removal from Wastewater
This study aims to contribute to constructed wetlandsâ (CWs) eco-efficiency by applying the concepts of circular economy and waste to treat waste. Five sets of lab-scale CWs with different combinations of filling materials were evaluated and the effect of the hydraulic loading rate (HLR) on the nutrient removal efficiencies was studied. Each CW set consisted of two, duplicate, plastic pots with solid waste filling supporting Phragmites australis macrophyte plants. The filling materials were layer combinations of limestone rock fragments, a waste from construction activities, and one of four other solid wastes: cork granulates from the cork industry (LCG); snail shells from the food and catering industry (LSS); coal slag from coal power plants (LCS); and clay brick fragments from construction activities (LBF). A reference set (LO) was filled only with limestone fragments. The CWs were operated using a low-strength wastewater in successive fill-and-drain cycles with a retention time of one to eight days and a one-day rest. Their removal efficiency was evaluated for COD, total phosphorus (TP) and total nitrogen (TN). All four CWs with mixed filling showed COD removal efficiencies higher than the reference CW and above 79%. The highest removal efficiency was achieved by the LCS CW (91 to 97%). The reference LO CW showed the highest TP removal efficiency. With exception of the LSS CW, the mixed filling CWs showed removal efficiencies close to the reference CW (above 55%). All but the LSS CW showed higher TN removal efficiencies than the reference CW (above 51%). The observed effect of HLR depends on the type of CW. The effect on COD, TP and TN removal efficiencies averaged 9%, 15% and 20%, respectively, for a range of HLR from 0.005 to 0.087 m/day. From this study it can be concluded that all tested layer-packed mixed solid waste fillings are adequate substrate combinations for nutrient removal from wastewater. Moreover, high nutrient removal efficiencies were maintained over a wide range of hydraulic loading rates. This innovative combination of waste materials can improve the CW adaptability to specific types of wastewater and contribute to reducing solid waste disposal in landfills.This work was supported by Program FEDER, ref. POCI-01-0145-FEDER-023314, project VALORBIO. The authors acknowledge the collaboration of the Lab.IPT staff and the assistance of the Instituto PolitĂ©cnico de Tomar maintenance staff.info:eu-repo/semantics/publishedVersio
Combination of various solid wastes with fragmented limestone as filler for constructed wetlands used for wastewater treatment
This study aims to contribute to the development of eco-efficient constructed wetlands through the concept of circular economy and the use of waste to treat waste Combinations of five solid wastes were evaluated as filler materials for CWs used for wastewater treatment To evaluate the combined capability of the waste materials to wastewater treatment, five sets of unplanted lab-scale CWs were established The CWs were operated in a discontinuous mode for three successive fill and drain cycles The highest COD removal rate was obtained for a CW filled with limestone and cork waste 90.3+/-0.9%. The highest total nitrogen removal rate was obtained for a CW filled with limestone and clay brick fragments 84.8+/-0.1%. Total phosphorus removal percentage of 91.8+/-0.1% was achieved for a control CW filled with limestone It was observed that layer packed solid waste combination fillings are adequate in improving COD removal in limestone based CWs, and that all but the limestone snail shells filling have a very good performance for total nitrogen and total phosphorus removal from wastewater.info:eu-repo/semantics/publishedVersio
Tracer experiments with lithium chloride to evaluate the hydrodynamics of constructed wetlands. Comparison of alternative analytical methods
The characterization of water flow dynamics (hydrodynamics) through constructed wetlands is relevant for optimizing wastewater treatment. Although constructed wetlands consist of simple systems, the water flow is complex and irregular, therefore, the study of hydrodynamics requires the use of experimental technics such as tracer experiments. To evaluate the effects of the use of three different analytical methods to compute the concentration of lithium chloride on the main hydrodynamics parameters, tracer experiments were conducted in ten independent lab-scale constructed wetlands. The concentration of lithium chloride in the output flow of the wetlands was calculated by flame photometry, electrical conductivity using a calibration curve and electrical conductivity using the salt molar conductivity. The paired samples T-test or the non-parametric Wilcoxonâs Signed-Ranks test were used to demonstrate that the computed hydraulic retention time and the number of tanks accordingly with the tanks-in-series model were not significantly affected by the selected analytical method.This work has been financially supported by FEDER grant COMPETE-01-0145-023342 to project VALORBIO. Authors acknowledge the support of BIOTEC.ipt and Lab.IPT and the work of Carlos Ferreira, Isabel Silva and Alcino Serras.info:eu-repo/semantics/publishedVersio
Enrichment of carbon monoxide utilising microorganisms from methanogenic bioreactor sludge
Conversion of CO is the rate limiting step during anaerobic conversion of syngas (a gaseous mixture mainly composed of CO, CO2 and H2). In this work we study the microbial diversity in anaerobic sludge submitted to extended contact to syngas in a multi-orifice baffled bioreactor (MOBB). Methane was the main product resulting from syngas conversion in the MOBB. Enrichment cultures started with this sludge produced methane as final product, but also acetate. 16S rRNA gene analysis revealed a predominance of Acetobacterium and Sporomusa species in the enrichments. These are homoacetogenic bacteria that might be involved in CO conversion to acetate. Hydrogen was formed as intermediary from CO conversion and likely used by hydrogenotrophs with the formation of methane. Pasteurisation and serial dilutions of stable CO-converting enrichments resulted in a microbial culture dominated by two Sporomusa species that are able to use CO as sole substrate
Agar extraction from integrated multitrophic aquacultured Gracilaria vermiculophylla: Evaluation of a microwave-assisted process using response surface methodology
Microwave-assisted extraction (MAE) of agar from Gracilaria vermiculophylla, produced in an integrated
multitrophic aquaculture (IMTA) system, from Ria de Aveiro (northwestern Portugal), was tested and
optimized using response surface methodology. The influence of the MAE operational parameters
(extraction time, temperature, solvent volume and stirring speed) on the physical and chemical properties
of agar (yield, gel strength, gelling and melting temperatures, as well as, sulphate and 3,6-anhydro-Lgalactose
contents) was evaluated in a 2^4 orthogonal composite design. The quality of the extracted agar
compared favorably with the attained using traditional extraction (2 h at 85ÂșC) while reducing drastically
extraction time, solvent consumption and waste disposal requirements. Agar MAE optimum results
were: an yield of 14.4 ± 0.4%, a gel strength of 1331 ± 51 g/cm2, 40.7 ± 0.2 _C gelling temperature,
93.1 ± 0.5ÂșC melting temperature, 1.73 ± 0.13% sulfate content and 39.4 ± 0.3% 3,6-anhydro-L-galactose
content. Furthermore, this study suggests the feasibility of the exploitation of G. vermiculophylla grew
in IMTA systems for agar production
Poly(Ethylene glycol) diacrylate iongel membranes reinforced with nanoclays for co2 separation
Despite the fact that iongels are very attractive materials for gas separation membranes, they often show mechanical stability issues mainly due to the high ionic liquid (IL) content (â„60 wt%) needed to achieve high gas separation performances. This work investigates a strategy to improve the mechanical properties of iongel membranes, which consists in the incorporation of montmorillonite (MMT) nanoclay, from 0.2 to 7.5 wt%, into a cross-linked poly(ethylene glycol) diacrylate (PEGDA) network containing 60 wt% of the IL 1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide ([C2mim][TFSI]). The iongels were prepared by a simple one-pot method using ultraviolet (UV) initiated polymerization of poly(ethylene glycol) diacrylate (PEGDA) and characterized by several techniques to assess their physico-chemical properties. The thermal stability of the iongels was influenced by the addition of higher MMT contents (>5 wt%). It was possible to improve both puncture strength and elongation at break with MMT contents up to 1 wt%. Furthermore, the highest ideal gas selectivities were achieved for iongels containing 0.5 wt% MMT, while the highest CO2 permeability was observed at 7.5 wt% MMT content, due to an increase in diffusivity. Remarkably, this strategy allowed for the preparation and gas permeation of self-standing iongel containing 80 wt% IL, which had not been possible up until now.publishersversionpublishe
Poly(ionic liquid)-based engineered mixed matrix membranes for CO2/H2 separation
Unformatted preprintPoly(ionic liquid)s (PIL) have emerged as a class of versatile polyelectrolites, that can be used to prepare new materials able to achieve superior performances compared to conventional polymers. The combination of PILs with ionic liquids (ILs) may serve as a suitable matrix for the preparation of membranes for gas separation. In this work, mixed matrix membranes (MMMs) combining a pyrrolidinium-based PIL, an IL and three highly CO2-selective metal organic frameworks (MOFs) were prepared. The different MOFs (MIL-53, Cu3(BTC)2 and ZIF-8) were used as fillers, aiming to maximize the membranes performance towards the purification of syngas. The influence of different MOFs and loadings (0, 10, 20 and 30 wt.%) on the thermal and mechanical stabilities of the membranes and their performance in terms of CO2 permeability and CO2/H2 ideal selectivity was assessed. The compatibility between the materials was confirmed by SEM-EDS and FTIR spectroscopy. The prepared MMMs revealed to be thermally stable within the temperature range of the syngas stream, with a loss of mechanical stability upon the MOF incorporation. The increasing MOF content in the MMMs, resulted in an improvement of both CO2 permeability and CO2/H2 ideal selectivity. Among the three MOFs studied, membranes based on ZIF-8 showed the highest permeabilities (up to 97.2 barrer), while membranes based on MIL-53 showed the highest improvement in selectivity (up to 13.3). Remarkably, all permeation results surpass the upper bound limit for the CO2/H2 separation, showing the membranes potential for the desired gas separation.This work was partially supported by R&D Units UID/Multi/04551/2013 (Green-it), UID/QUI/00100/2013 (CQE), and the Associated Laboratory Research Unit for Green Chemistry, Technologies and Clean Processes, LAQV which is financed by national funds from FCT/MCTES(UID/QUI/50006/2013) and co-financed by the ERDF under the PT2020 Partnership Agreement (POCI-01-0145-FEDER-007265). Ana R. Nabais, LuĂsa A. Neves and Liliana C. TomĂ© acknowledge FCT/MCTES for financial support through project PTDC/CTM-POL/2676/2014, FCT Investigator Contract IF/00505/2014 and Post-doctoral research grant SFRH/BDP/101793/2014, respectively. This project has received funding from the European Unionâs Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement No 745734
CFD parametric study of thermal performance of different fruit packaging box designs
Air temperature and relative humidity values of cold storage conditions are the major factor affecting the perishability of fresh fruits. The sooner the field heat is extracted from the products and the proper temperature is maintained consistency throughout the cold chain, larger it will be shelf life of these products. Forced air cooling is the most commonly used technique to remove the field heat in post-harvest storage. Energy-efficient and quality-oriented cold storage mainly depends on the time to remove the heat. This time can be reduced by optimizing the configuration of the vent holes of the packaging box, namely it dimension (area), it shape, alignment and position. This paper shows the numerical predictions of air temperature and velocity by a CFD parametric study of eight different vent hole configurations. These configurations consider a packaging box with double wall. The vent holes of each wall have different dimension and shape. The vent holes of both walls can be also aligned or unaligned. The analysis of results aims to determine the best configurations that improve the cooling rate, the airflow and temperature uniformity. The numerical predictions of the air temperature show close values, but three configurations can be identified as predicting the lowest air temperature values with lowest standard deviation. These results may help on the development of new configuration for fruit boxes that promote the extension of the fruits shelflife.(undefined
Multivariate monitoring of an activated sludge process for biological treatment of a synthetic wastewater effluent
- âŠ