This study aims to contribute to the development of eco-efficient constructed wetlands through the concept of circular economy and the use of waste to treat waste Combinations of five solid wastes were evaluated as filler materials for CWs used for wastewater treatment To evaluate the combined capability of the waste materials to wastewater treatment, five sets of unplanted lab-scale CWs were established The CWs were operated in a discontinuous mode for three successive fill and drain cycles The highest COD removal rate was obtained for a CW filled with limestone and cork waste 90.3+/-0.9%. The highest total nitrogen removal rate was obtained for a CW filled with limestone and clay brick fragments 84.8+/-0.1%. Total phosphorus removal percentage of 91.8+/-0.1% was achieved for a control CW filled with limestone It was observed that layer packed solid waste combination fillings are adequate in improving COD removal in limestone based CWs, and that all but the limestone snail shells filling have a very good performance for total nitrogen and total phosphorus removal from wastewater.info:eu-repo/semantics/publishedVersio