Stochastic models for atomic clocks

For the atomic clocks used in the National Bureau of Standards Time Scales, an adequate model is the superposition of white FM, random walk FM, and linear frequency drift for times longer than about one minute. The model was tested on several clocks using maximum likelihood techniques for parameter estimation and the residuals were acceptably random. Conventional diagnostics indicate that additional model elements contribute no significant improvement to the model even at the expense of the added model complexity

Simulations of turbulent convection in rotating young solar-like stars: Differential rotation and meridional circulation

We present the results of three-dimensional simulations of the deep convective envelope of a young (10 Myr) one-solar-mass star, obtained with the Anelastic Spherical Harmonic code. Since young stars are known to be faster rotators than their main sequence counterparts, we have systematically studied the impact of the stellar rotation speed, by considering stars spinning up to five times as fast as the Sun. The aim of these nonlinear models is to understand the complex interactions between convection and rotation. We discuss the influence of the turbulence level and of the rotation rate on the intensity and the topology of the mean flows. For all of the computed models, we find a solar-type superficial differential rotation, with an equatorial acceleration, and meridional circulation that exhibits a multicellular structure. Even if the differential rotation contrast decreases only marginally for high rotation rates, the meridional circulation intensity clearly weakens according to our simulations. We have also shown that, for Taylor numbers above a certain threshold (Ta>10^9), the convection can develop a vacillating behavior. Since simulations with high turbulence levels and rotation rates exhibit strongly cylindrical internal rotation profiles, we have considered the influence of baroclinic effects at the base of the convective envelope of these young Suns, to see whether such effect can modify the otherwise near cylindrical profiles to produce more conical, solar-like profiles.Comment: 32 pages, 18 figures, 2 tables, to appear in Ap

The Deformable Mirror Demonstration Mission (DeMi) CubeSat: optomechanical design validation and laboratory calibration

Coronagraphs on future space telescopes will require precise wavefront correction to detect Earth-like exoplanets near their host stars. High-actuator count microelectromechanical system (MEMS) deformable mirrors provide wavefront control with low size, weight, and power. The Deformable Mirror Demonstration Mission (DeMi) payload will demonstrate a 140 actuator MEMS deformable mirror (DM) with \SI{5.5}{\micro\meter} maximum stroke. We present the flight optomechanical design, lab tests of the flight wavefront sensor and wavefront reconstructor, and simulations of closed-loop control of wavefront aberrations. We also present the compact flight DM controller, capable of driving up to 192 actuator channels at 0-250V with 14-bit resolution. Two embedded Raspberry Pi 3 compute modules are used for task management and wavefront reconstruction. The spacecraft is a 6U CubeSat (30 cm x 20 cm x 10 cm) and launch is planned for 2019.Comment: 15 pages, 10 figues. Presented at SPIE Astronomical Telescopes + Instrumentation, Austin, Texas, US

"My Children and I Will no Longer Suffer from Malaria": A Qualitative Study of the Acceptance and Rejection of Indoor Residual Spraying to Prevent Malaria in Tanzania.

The objective of this study was to identify attitudes and misconceptions related to acceptance or refusal of indoor residual spraying (IRS) in Tanzania for both the general population and among certain groups (e.g., farmers, fishermen, community leaders, and women). This study was a series of qualitative, semi-structured, in-depth interviews and focus group discussions conducted from October 2010 to March 2011 on Mainland Tanzania and Zanzibar. Three groups of participants were targeted: acceptors of IRS (those who have already had their homes sprayed), refusers (those whose communities have been sprayed, but refused to have their individual home sprayed), and those whose houses were about to be sprayed as part of IRS scale-up. Interviews were also conducted with farmers, fishermen, women, community leaders and members of non-government organizations responsible for community mobilization around IRS. Results showed refusers are a very small percentage of the population. They tend to be more knowledgeable people such as teachers, drivers, extension workers, and other civil servants who do not simply follow the orders of the local government or the sprayers, but are skeptical about the process until they see true results. Refusal took three forms: 1) refusing partially until thorough explanation is provided; 2) accepting spray to be done in a few rooms only; and 3) refusing outright. In most of the refusal interviews, refusers justified why their houses were not sprayed, often without admitting that they had refused. Reasons for refusal included initial ignorance about the reasons for IRS, uncertainty about its effectiveness, increased prevalence of other insects, potential physical side effects, odour, rumours about the chemical affecting fertility, embarrassment about moving poor quality possessions out of the house, and belief that the spray was politically motivated. To increase IRS acceptance, participants recommended more emphasis on providing thorough public education, ensuring the sprayers themselves are more knowledgeable about IRS, and asking that community leaders encourage participation by their constituents rather than threatening punishment for noncompliance. While there are several rumours and misconceptions concerning IRS in Tanzania, acceptance is very high and continues to increase as positive results become apparent

Recurrent delirium over 12 months predicts dementia: results of the Delirium and Cognitive Impact in Dementia (DECIDE) study

Background: Delirium is common, distressing and associated with poor outcomes. Previous studies investigating the impact of delirium on cognitive outcomes have been limited by incomplete ascertainment of baseline cognition or lack of prospective delirium assessments. This study quantified the association between delirium and cognitive function over time by prospectively ascertaining delirium in a cohort aged ≥ 65 years in whom baseline cognition had previously been established. Methods: For 12 months, we assessed participants from the Cognitive Function and Ageing Study II-Newcastle for delirium daily during hospital admissions. At 1-year, we assessed cognitive decline and dementia in those with and without delirium. We evaluated the effect of delirium (including its duration and number of episodes) on cognitive function over time, independently of baseline cognition and illness severity. Results: Eighty two of 205 participants recruited developed delirium in hospital (40%). One-year outcome data were available for 173 participants: 18 had a new dementia diagnosis, 38 had died. Delirium was associated with cognitive decline (−1.8 Mini-Mental State Examination points [95% CI –3.5 to –0.2]) and an increased risk of new dementia diagnosis at follow up (OR 8.8 [95% CI 1.9–41.4]). More than one episode and more days with delirium (>5 days) were associated with worse cognitive outcomes. Conclusions: Delirium increases risk of future cognitive decline and dementia, independent of illness severity and baseline cognition, with more episodes associated with worse cognitive outcomes. Given that delirium has been shown to be preventable in some cases, we propose that delirium is a potentially modifiable risk factor for dementi

Feasibility Evaluation and Retrofit Plan for Cold Crucible Induction Melter Deployment in the Defense Waste Processing Facility at Savannah River Site 8118

Cold crucible induction melters (CCIM) have been proposed as an alternative technology for waste glass melting at the Defense Waste Processing Facility (DWPF) at Savannah River Site (SRS) as well as for other waste vitrification facilities. Proponents of this technology cite high temperature operation, high tolerance for noble metals and aluminum, high waste loading, high throughput capacity, and low equipment cost as the advantages over existing Joule Heated Melter (JHM) technology. The CCIM uses induction heating to maintain molten glass at high temperature. A water-cooled helical induction coil is connected to an AC current supply, typically operating at frequencies from 100 KHz to 5 MHz. The oscillating magnetic field generated by the oscillating current flow through the coil induces eddy currents in conductive materials within the coil. Those oscillating eddy currents, in turn, generate heat in the material. In the CCIM, the induction coil surrounds a 'Cold Crucible' which is formed by metal tubes, typically copper or stainless steel. The tubes are constructed such that the magnetic field does not couple with the crucible. Therefore, the field generated by the induction coil couples primarily with the conductive medium (hot glass) within. The crucible tubes are water cooled to maintain their temperature between 100 C to 200 C so that a protective layer of molten glass and/or batch material, referred to as a 'skull', forms between them and the hot, corrosive melt. Because the protective skull is the only material directly in contact with the molten glass, the CCIM doesn't have the temperature limitations of traditional refractory lined JHM. It can be operated at melt temperatures in excess of 2000 C, allowing processing of high waste loading batches and difficult-to-melt compounds. The CCIM is poured through a bottom drain, typically through a water-cooled slide valve that starts and stops the pour stream. To promote uniform temperature distribution and increase heat transfer to the slurry fed High Level Waste (HLW) sludge, the CCIM may be equipped with bubblers and/or water cooled mechanical agitators. The DWPF could benefit from use of CCIM technology, especially in light of our latest projections of waste volume to be vitrified. Increased waste loading and increased throughput could result in substantial life cycle cost reduction. In order to significantly surpass the waste throughput capability of the currently installed JHM, it may be necessary to install two 950 mm CCIMs in the DWPF Melt Cell. A cursory evaluation of system design requirements and modifications to the facility that may be required to support installation and operation of two 950 mm CCIMs was performed. Based on this evaluation, it appears technically feasible to position two CCIMs in the Melt Cell of the DWPF within the existing footprint of the current melter. Interfaces with support systems and controls including Melter Feed, Power, Melter Cooling Water, Melter Off-gas, and Canister Operations must be designed to support dual CCIM operations. This paper describes the CCIM technology and identifies technical challenges that must be addressed in order to implement CCIMs in the DWPF

Netec Cold Crucible Induction Melter Demonstration for Srnl With Simulated Sludge Batch 4 Dwpf Waste

Cold Crucible Induction Melter (CCIM) Technology is being considered as a possible next generation melter for the Defense Waste Processing Facility (DWPF). Initial and baseline demonstrations that vitrified a Sludge Batch 4 (SB4) simulant at a waste loading of 50 weight percent (versus about 38 weight percent in the current DWPF Melter) were performed by the Nuclear Engineering and Technology Institute (NETEC) in South Korea via a subcontract from the Washington Savannah River Company (WSRC). This higher waste loading was achieved by using a CCIM which can run at higher glass processing temperatures (1250 C and higher) than the current DWPF Melter (1150 C). Higher waste loadings would result in less canisters being filled and faster waste throughput at the DWPF. The main demonstration objectives were to determine the maximum melt rate/waste throughput for the NETEC CCIM with a Sludge Batch 4 simulant as well as determine the viability of this technology for use in the DWPF

Delirium and delirium severity predict the trajectory of the Hierarchical Assessment of Balance and Mobility (HABAM) in hospitalised older people: findings from the DECIDE Study

BACKGROUND: Delirium is common, distressing and associated with poor outcomes. Despite this, delirium remains poorly recognised, resulting in worse outcomes. There is an urgent need for methods to objectively assess for delirium. Physical function has been proposed as a potential surrogate marker, but few studies have monitored physical function in the context of delirium. We examined if trajectories of physical function are affected by the presence and severity of delirium in a representative sample of hospitalised participants over 65 years. METHODS: During hospital admissions in 2016, we assessed participants from the DECIDE study daily for delirium and physical function, using the Hierarchical Assessment of Balance and Mobility (HABAM). We used linear mixed models to assess the effect of delirium and delirium severity during admission on HABAM trajectory. RESULTS: Of 178 participants, 58 experienced delirium during admission. Median HABAM scores in those with delirium were significantly higher (indicating worse mobility) than those without delirium. Modelling HABAM trajectories, HABAM scores at first assessment were worse in those with delirium than those without, by 0.76 (95% CI: 0.49-1.04) points. Participants with severe delirium experienced a much greater perturbance in their physical function, with an even lower value at first assessment and slower subsequent improvement. CONCLUSIONS: Physical function was worse in those with delirium compared to without. This supports the assertion that motor disturbances are a core feature of delirium and monitoring physical function, using a tool such as the HABAM, may have clinical utility as a surrogate marker for delirium and its resolution

Long-distance frequency transfer over an urban fiber link using optical phase stabilization

We transferred the frequency of an ultra-stable laser over 86 km of urban fiber. The link is composed of two cascaded 43-km fibers connecting two laboratories, LNE-SYRTE and LPL in Paris area. In an effort to realistically demonstrate a link of 172 km without using spooled fiber extensions, we implemented a recirculation loop to double the length of the urban fiber link. The link is fed with a 1542-nm cavity stabilized fiber laser having a sub-Hz linewidth. The fiber-induced phase noise is measured and cancelled with an all fiber-based interferometer using commercial off the shelf pigtailed telecommunication components. The compensated link shows an Allan deviation of a few 10-16 at one second and a few 10-19 at 10,000 seconds

Hospitalisation without delirium is not associated with cognitive decline in a population-based sample of older people-results from a nested, longitudinal cohort study

Background: Acute hospitalisation and delirium have individually been shown to adversely affect trajectories of cognitive decline but have not previously been considered together. This work aimed to explore the impact on cognition of hospital admission with and without delirium, compared to a control group with no hospital admissions. // Methods: The Delirium and Cognitive Impact in Dementia (DECIDE) study was nested within the Cognitive Function and Ageing Study II (CFAS II)–Newcastle cohort. CFAS II participants completed two baseline interviews, including the Mini-Mental State Examination (MMSE). During 2016, surviving participants from CFAS II–Newcastle were recruited to DECIDE on admission to hospital. Participants were reviewed daily to determine delirium status. During 2017, all DECIDE participants and age, sex and years of education matched controls without hospital admissions during 2016 were invited to repeat the CFAS II interview. Delirium was excluded in the control group using the Informant Assessment of Geriatric Delirium Scale (i-AGeD). Linear mixed effects modelling determined predictors of cognitive decline. // Results: During 2016, 82 of 205 (40%) DECIDE participants had at least one episode of delirium. At 1 year, 135 of 205 hospitalised participants completed an interview along with 100 controls. No controls experienced delirium (i-AGeD>4). Delirium was associated with a faster rate of cognitive decline compared to those without delirium (β = −2.2, P < 0.001), but number of hospital admissions was not (P = 0.447). // Conclusions: These results suggest that delirium during hospitalisation rather than hospitalisation per se is a risk factor for future cognitive decline, emphasising the need for dementia prevention studies that focus on delirium intervention