1,097 research outputs found

    The benchmark black hole in NGC 4258: dynamical models from high-resolution two-dimensional stellar kinematics

    Get PDF
    NGC 4258 is the galaxy with the most accurate (maser-based) determination for the mass of the supermassive black hole (SMBH) in its nucleus. In this work we present a two-dimensional mapping of the stellar kinematics in the inner 3.0 x 3.0 arcsec = 100 x 100 pc of NGC 4258 using adaptative-optics observations obtained with the Near-Infrared Integral Field Spectrograph of the GEMINI North telescope at a 0.11 arcsec (4 pc) angular resolution. The observations resolve the radius of influence of the SMBH, revealing an abrupt increase in the stellar velocity dispersion within 10 pc from the nucleus, consistent with the presence of a SMBH there. Assuming that the galaxy nucleus is in a steady state and that the velocity dispersion ellipsoid is aligned with a cylindrical coordinate system, we constructed a Jeans anisotropic dynamical model to fit the observed kinematics distribution. Our dynamical model assumes that the galaxy has axial symmetry and is constructed using the multi-gaussian expansion method to parametrize the observed surface brightness distribution. The Jeans dynamical model has three free parameters: the mass of the central SMBH, the mass-luminosity ratio of the galaxy and the anisotropy of the velocity distribution. We test two types of models: one with constant velocity anisotropy, and another with variable anisotropy. The model that best reproduces the observed kinematics was obtained considering that the galaxy has radially varying anisotropy, being the best-fitting parameters with 3σ\sigma significance M∙=4.8−0.9+0.8×107 M⊙M_\bullet=4.8^{+0.8}_{-0.9}\times 10^7\,{\rm M_\odot} and Γk=4.1−0.5+0.4\Gamma_k = 4.1^{+0.4}_{-0.5}. This value for the mass of the SMBH is just 25 per cent larger than that of the maser determination and 50 per cent larger that a previous stellar dynamical determination obtained via Schwarzschild models.Comment: Accepted for publication in MNRAS, 19 pages, 19 figure

    Temporal Variation in Resuspension Potential and Associated Nutrient Dynamics in Shallow Coastal Environments

    Get PDF
    Sediment resuspension may play a major role in sediment-water exchange of nutrients, matter and energy in coastal areas where waves and currents dominate sediment transport. Biogeochemical sediment properties regulate sediment erodibility, but there is only limited knowledge of how temporal variability in environmental variables is reflected in the resuspension potential, especially for subtidal habitats. Further, the significance of resuspension on nutrient fluxes in coastal environments has remained unclear as contradicting results have been reported. Here we quantified the temporal variation in resuspension potential metrics (erosion threshold (τc; N m−2) and erosion constant (me; g N−1 s−1)) and associated nutrient fluxes from three sites in the Hanko archipelago (Finland) using a core-based erosion device (EROMES). The sites were sampled bi-monthly from April to December. We also quantified the temporal variation in biogeochemical sediment properties at each site. The τc exhibited the clearest temporal pattern in muddy sediment, where the coefficient of variation (= 67) was two to three times higher than the mixed (= 29) and sandy (= 16) sediments. Dry bulk density was the best predictor for sediment erodibility at all sites explaining 26–46% of the temporal variation in τc despite its limited variability at sandier sites. In addition, temporal variations in the macrofaunal community were important predictors of muddy sediment erodibility and therefore community dynamics need to be considered in sediment transport studies. All sites were potential nutrient sources, yet the overall role of sediment resuspension on nutrient release from the sediments was small.Peer reviewe

    Identifying areas prone to coastal hypoxia - the role of topography

    Get PDF
    Hypoxia is an increasing problem in marine ecosystems around the world. While major advances have been made in our understanding of the drivers of hypoxia, challenges remain in describing oxygen dynamics in coastal regions. The complexity of many coastal areas and lack of detailed in situ data have hindered the development of models describing oxygen dynamics at a sufficient spatial resolution for efficient management actions to take place. It is well known that the enclosed nature of seafloors and reduced water mixing facilitates hypoxia formation, but the degree to which topography contributes to hypoxia formation and small-scale variability of coastal hypoxia has not been previously quantified. We developed simple proxies of seafloor heterogeneity and modeled oxygen deficiency in complex coastal areas in the northern Baltic Sea. According to our models, topographical parameters alone explained similar to 80 % of hypoxia occurrences. The models also revealed that less than 25 % of the studied seascapes were prone to hypoxia during late summer (August-September). However, large variation existed in the spatial and temporal patterns of hypoxia, as certain areas were prone to occasional severe hypoxia (O-2 <2 mg L-1), while others were more susceptible to recurrent moderate hypoxia (O-2 <4.6 mg L-1). Areas identified as problematic in our study were characterized by low exposure to wave forcing, high topographic shelter from surrounding areas and isolation from the open sea, all contributing to longer water residence times in seabed depressions. Deviations from this topographical background are probably caused by strong currents or high nutrient loading, thus improving or worsening oxygen status, respectively. In some areas, connectivity with adjacent deeper basins may also influence coastal oxygen dynamics. Developed models could boost the performance of biogeochemical models, aid developing nutrient abatement measures and pinpoint areas where management actions are most urgently needed.Peer reviewe

    Exploring the anti-apoptotic role of HAX-1 versus BCL-XL in cytokine-dependent bone marrow-derived cells from mice

    Get PDF
    AbstractHS-1-associated protein X-1 (HAX-1) is a multi-functional protein that has been implicated in the regulation of apoptosis, cell motility and calcium homeostasis. In the present study, we set out to assess the postulated functional resemblance of HAX-1 to the BCL-2 family of anti-apoptotic proteins using non-transformed, cytokine-dependent murine bone marrow cells as a model system. BCL-XL, but not HAX-1 protected against cytokine withdrawal-induced apoptosis while HAX-1 and BCL-XL significantly reduced thapsigargin-triggered (calcium-dependent) apoptosis. The data argue in favor of cell type- and stimulus-specific roles of HAX-1 in regulation of cell survival

    Thermodynamics of wetting, prewetting and surface phase transitions with surface binding

    Get PDF
    In living cells, protein-rich condensates can wet the cell membrane and surfaces of membrane-bound organelles. Interestingly, many phase-separating proteins also bind to membranes leading to a molecular layer of bound molecules. Here we investigate how binding to membranes affects wetting, prewetting and surface phase transitions. We derive a thermodynamic theory for a three-dimensional bulk in the presence of a two-dimensional, flat membrane. At phase coexistence, we find that membrane binding facilitates complete wetting and thus lowers the wetting angle. Moreover, below the saturation concentration, binding facilitates the formation of a thick layer at the membrane and thereby shifts the prewetting phase transition far below the saturation concentration. The distinction between bound and unbound molecules near the surface leads to a large variety of surface states and complex surface phase diagrams with a rich topology of phase transitions. Our work suggests that surface phase transitions combined with molecular binding represent a versatile mechanism to control the formation of protein-rich domains at intra-cellular surfaces

    High throughput shotgun sequencing of eRNA reveals taxonomic and derived functional shifts across a benthic productivity gradient

    Get PDF
    Benthic macrofauna is regularly used in monitoring programmes, however the vast majority of benthic eukaryotic biodiversity lies mostly in microscopic organisms, such as meiofauna (invertebrates <1 mm) and protists, that rapidly responds to environmental change. These communities have traditionally been hard to sample and handle in the laboratory, but DNA sequencing has made such work less time consuming. While DNA sequencing captures both alive and dead organisms, environmental RNA (eRNA) better targets living organisms or organisms of recent origin in the environment. Here, we assessed the biodiversity of three known bioindicator microeukaryote groups (nematodes, foraminifera, and ciliates) in sediment samples collected at seven coastal sites along an organic carbon (OC) gradient. We aimed to investigate if eRNA shotgun sequencing can be used to simultaneously detect differences in (i) biodiversity of multiple microeukaryotic communities; and (ii) functional feeding traits of nematodes. Results showed that biodiversity was lower for nematodes and foraminifera in high OC (6.2%-6.9%), when compared to low OC sediments (1.2%-2.8%). Dissimilarity in community composition increased for all three groups between Low OC and High OC, as well as the classified feeding type of nematode genera (with more nonselective deposit feeders in high OC sediment). High relative abundant genera included nematodeSabatieriaand foraminiferaElphidiumin high OC, andCryptocaryon-like ciliates in low OC sediments. Considering that future sequencing technologies are likely to decrease in cost, the use of eRNA shotgun sequencing to assess biodiversity of benthic microeukaryotes could be a powerful tool in recurring monitoring programmes.Peer reviewe

    Primary alpha-tertiary amine synthesis via alpha-C-H functionalization

    Get PDF
    A quinone-mediated general synthetic platform for the construction of primary a-tertiary amines from abundant primary a-branched amine starting materials is described. This procedure pivots on the efficient in situ generation of reactive ketimine intermediates and subsequent reaction with carboncentered nucleophiles such as organomagnesium and organolithium reagents, and TMSCN, creating quaternary centers. Furthermore, extension to reverse polarity photoredox catalysis enables reactivity with electrophiles, via a nucleophilic a-amino radical intermediate. This efficient, broadly applicable and scalable amine-to-amine synthetic platform was successfully applied to library and API synthesis and in the functionalization of drug molecules

    Myosin-Induced Gliding Patterns at Varied [MgATP] Unveil a Dynamic Actin Filament

    Get PDF
    AbstractActin filaments have key roles in cell motility but are generally claimed to be passive interaction partners in actin-myosin-based motion generation. Here, we present evidence against this static view based on an altered myosin-induced actin filament gliding pattern in an in vitro motility assay at varied [MgATP]. The statistics that characterize the degree of meandering of the actin filament paths suggest that for [MgATP] ≥ 0.25 mM, the flexural rigidity of heavy meromyosin (HMM)-propelled actin filaments is similar (without phalloidin) or slightly lower (with phalloidin) than that of HMM-free filaments observed in solution without surface tethering. When [MgATP] was reduced to ≤0.1 mM, the actin filament paths in the in vitro motility assay became appreciably more winding in both the presence and absence of phalloidin. This effect of lowered [MgATP] was qualitatively different from that seen when HMM was mixed with ATP-insensitive, N-ethylmaleimide-treated HMM (NEM-HMM; 25–30%). In particular, the addition of NEM-HMM increased a non-Gaussian tail in the path curvature distribution as well as the number of events in which different parts of an actin filament followed different paths. These effects were the opposite of those observed with reduced [MgATP]. Theoretical modeling suggests a 30–40% lowered flexural rigidity of the actin filaments at [MgATP] ≤ 0.1 mM and local bending of the filament front upon each myosin head attachment. Overall, the results fit with appreciable structural changes in the actin filament during actomyosin-based motion generation, and modulation of the actin filament mechanical properties by the dominating chemomechanical actomyosin state
    • …
    corecore