22 research outputs found
Recommended from our members
Evolution of Off-Fault Deformation along Analog Strike-Slip Faults
Strike-slip faults evolve to accommodate more fault slip, resulting in less off-fault deformation. In analog experiments, the measured fault slip to off-fault deformation ratios are similar to those measured in crustal strike-slip systems, such as the San Andreas fault system. Established planar faults have the largest fault slip to off-fault deformation ratio of ~0.98. In systems without a pre-existing fault surface, crustal thickness and basal detachment conditions affect shear zone width and roughness. However, once the applied plate displacement is 1-2 times the crustal thickness, partitioning of deformation between fault slip and off-fault distributed shear is \u3e0.90, regardless of the basal boundary conditions. In addition, at any moment during the evolution of the analog fault system, the ratio of fault slip to off-fault deformation is larger than the cumulative ratio. We also find that the upward and lateral propagation of faults as an active shear zone developing early in the experiments has greater impact on the system’s strike-slip efficiency than later interaction between non-collinear fault segments. For bends with stepover distance of twice the crustal thickness, the fault slip to off-fault deformation ratio increases up to ~0.80-0.90, after applied plate displacement exceeds twice the crustal thickness. Propagation of new oblique-slip faults around sharp restraining bends reduces the overall off-fault deformation within the fault system. In contrast, fault segments within gentle restraining bends continue to slip and the propagation of new oblique-slip faults have less effect on the system’s efficiency than for sharp restraining bends
May Measurement Month 2018: a pragmatic global screening campaign to raise awareness of blood pressure by the International Society of Hypertension
Aims
Raised blood pressure (BP) is the biggest contributor to mortality and disease burden worldwide and fewer than half of those with hypertension are aware of it. May Measurement Month (MMM) is a global campaign set up in 2017, to raise awareness of high BP and as a pragmatic solution to a lack of formal screening worldwide. The 2018 campaign was expanded, aiming to include more participants and countries.
Methods and results
Eighty-nine countries participated in MMM 2018. Volunteers (≥18 years) were recruited through opportunistic sampling at a variety of screening sites. Each participant had three BP measurements and completed a questionnaire on demographic, lifestyle, and environmental factors. Hypertension was defined as a systolic BP ≥140 mmHg or diastolic BP ≥90 mmHg, or taking antihypertensive medication. In total, 74.9% of screenees provided three BP readings. Multiple imputation using chained equations was used to impute missing readings. 1 504 963 individuals (mean age 45.3 years; 52.4% female) were screened. After multiple imputation, 502 079 (33.4%) individuals had hypertension, of whom 59.5% were aware of their diagnosis and 55.3% were taking antihypertensive medication. Of those on medication, 60.0% were controlled and of all hypertensives, 33.2% were controlled. We detected 224 285 individuals with untreated hypertension and 111 214 individuals with inadequately treated (systolic BP ≥ 140 mmHg or diastolic BP ≥ 90 mmHg) hypertension.
Conclusion
May Measurement Month expanded significantly compared with 2017, including more participants in more countries. The campaign identified over 335 000 adults with untreated or inadequately treated hypertension. In the absence of systematic screening programmes, MMM was effective at raising awareness at least among these individuals at risk
Surface rupture of multiple crustal faults in the 2016 Mw 7.8 Kaikōura, New Zealand, earthquake
Multiple (>20
>20
) crustal faults ruptured to the ground surface and seafloor in the 14 November 2016 M w
Mw
7.8 Kaikōura earthquake, and many have been documented in detail, providing an opportunity to understand the factors controlling multifault ruptures, including the role of the subduction interface. We present a summary of the surface ruptures, as well as previous knowledge including paleoseismic data, and use these data and a 3D geological model to calculate cumulative geological moment magnitudes (M G w
MwG
) and seismic moments for comparison with those from geophysical datasets. The earthquake ruptured faults with a wide range of orientations, sense of movement, slip rates, and recurrence intervals, and crossed a tectonic domain boundary, the Hope fault. The maximum net surface displacement was ∼12 m
∼12 m
on the Kekerengu and the Papatea faults, and average displacements for the major faults were 0.7–1.5 m south of the Hope fault, and 5.5–6.4 m to the north. M G w
MwG
using two different methods are M G w
MwG
7.7 +0.3 −0.2
7.7−0.2+0.3
and the seismic moment is 33%–67% of geophysical datasets. However, these are minimum values and a best estimate M G w
MwG
incorporating probable larger slip at depth, a 20 km seismogenic depth, and likely listric geometry is M G w
MwG
7.8±0.2
7.8±0.2
, suggests ≤32%
≤32%
of the moment may be attributed to slip on the subduction interface and/or a midcrustal detachment. Likely factors contributing to multifault rupture in the Kaikōura earthquake include (1) the presence of the subduction interface, (2) physical linkages between faults, (3) rupture of geologically immature faults in the south, and (4) inherited geological structure. The estimated recurrence interval for the Kaikōura earthquake is ≥5,000–10,000 yrs
≥5,000–10,000 yrs
, and so it is a relatively rare event. Nevertheless, these findings support the need for continued advances in seismic hazard modeling to ensure that they incorporate multifault ruptures that cross tectonic domain boundaries
Impact of COVID-19 on cardiovascular testing in the United States versus the rest of the world
Objectives: This study sought to quantify and compare the decline in volumes of cardiovascular procedures between the United States and non-US institutions during the early phase of the coronavirus disease-2019 (COVID-19) pandemic.
Background: The COVID-19 pandemic has disrupted the care of many non-COVID-19 illnesses. Reductions in diagnostic cardiovascular testing around the world have led to concerns over the implications of reduced testing for cardiovascular disease (CVD) morbidity and mortality.
Methods: Data were submitted to the INCAPS-COVID (International Atomic Energy Agency Non-Invasive Cardiology Protocols Study of COVID-19), a multinational registry comprising 909 institutions in 108 countries (including 155 facilities in 40 U.S. states), assessing the impact of the COVID-19 pandemic on volumes of diagnostic cardiovascular procedures. Data were obtained for April 2020 and compared with volumes of baseline procedures from March 2019. We compared laboratory characteristics, practices, and procedure volumes between U.S. and non-U.S. facilities and between U.S. geographic regions and identified factors associated with volume reduction in the United States.
Results: Reductions in the volumes of procedures in the United States were similar to those in non-U.S. facilities (68% vs. 63%, respectively; p = 0.237), although U.S. facilities reported greater reductions in invasive coronary angiography (69% vs. 53%, respectively; p < 0.001). Significantly more U.S. facilities reported increased use of telehealth and patient screening measures than non-U.S. facilities, such as temperature checks, symptom screenings, and COVID-19 testing. Reductions in volumes of procedures differed between U.S. regions, with larger declines observed in the Northeast (76%) and Midwest (74%) than in the South (62%) and West (44%). Prevalence of COVID-19, staff redeployments, outpatient centers, and urban centers were associated with greater reductions in volume in U.S. facilities in a multivariable analysis.
Conclusions: We observed marked reductions in U.S. cardiovascular testing in the early phase of the pandemic and significant variability between U.S. regions. The association between reductions of volumes and COVID-19 prevalence in the United States highlighted the need for proactive efforts to maintain access to cardiovascular testing in areas most affected by outbreaks of COVID-19 infection
Recommended from our members
Global burden of 288 causes of death and life expectancy decomposition in 204 countries and territories and 811 subnational locations, 1990–2021: a systematic analysis for the Global Burden of Disease Study 2021
BACKGROUND Regular, detailed reporting on population health by underlying cause of death is fundamental for public health decision making. Cause-specific estimates of mortality and the subsequent effects on life expectancy worldwide are valuable metrics to gauge progress in reducing mortality rates. These estimates are particularly important following large-scale mortality spikes, such as the COVID-19 pandemic. When systematically analysed, mortality rates and life expectancy allow comparisons of the consequences of causes of death globally and over time, providing a nuanced understanding of the effect of these causes on global populations. METHODS The Global Burden of Diseases, Injuries, and Risk Factors Study (GBD) 2021 cause-of-death analysis estimated mortality and years of life lost (YLLs) from 288 causes of death by age-sex-location-year in 204 countries and territories and 811 subnational locations for each year from 1990 until 2021. The analysis used 56 604 data sources, including data from vital registration and verbal autopsy as well as surveys, censuses, surveillance systems, and cancer registries, among others. As with previous GBD rounds, cause-specific death rates for most causes were estimated using the Cause of Death Ensemble model-a modelling tool developed for GBD to assess the out-of-sample predictive validity of different statistical models and covariate permutations and combine those results to produce cause-specific mortality estimates-with alternative strategies adapted to model causes with insufficient data, substantial changes in reporting over the study period, or unusual epidemiology. YLLs were computed as the product of the number of deaths for each cause-age-sex-location-year and the standard life expectancy at each age. As part of the modelling process, uncertainty intervals (UIs) were generated using the 2·5th and 97·5th percentiles from a 1000-draw distribution for each metric. We decomposed life expectancy by cause of death, location, and year to show cause-specific effects on life expectancy from 1990 to 2021. We also used the coefficient of variation and the fraction of population affected by 90% of deaths to highlight concentrations of mortality. Findings are reported in counts and age-standardised rates. Methodological improvements for cause-of-death estimates in GBD 2021 include the expansion of under-5-years age group to include four new age groups, enhanced methods to account for stochastic variation of sparse data, and the inclusion of COVID-19 and other pandemic-related mortality-which includes excess mortality associated with the pandemic, excluding COVID-19, lower respiratory infections, measles, malaria, and pertussis. For this analysis, 199 new country-years of vital registration cause-of-death data, 5 country-years of surveillance data, 21 country-years of verbal autopsy data, and 94 country-years of other data types were added to those used in previous GBD rounds. FINDINGS The leading causes of age-standardised deaths globally were the same in 2019 as they were in 1990; in descending order, these were, ischaemic heart disease, stroke, chronic obstructive pulmonary disease, and lower respiratory infections. In 2021, however, COVID-19 replaced stroke as the second-leading age-standardised cause of death, with 94·0 deaths (95% UI 89·2-100·0) per 100 000 population. The COVID-19 pandemic shifted the rankings of the leading five causes, lowering stroke to the third-leading and chronic obstructive pulmonary disease to the fourth-leading position. In 2021, the highest age-standardised death rates from COVID-19 occurred in sub-Saharan Africa (271·0 deaths [250·1-290·7] per 100 000 population) and Latin America and the Caribbean (195·4 deaths [182·1-211·4] per 100 000 population). The lowest age-standardised death rates from COVID-19 were in the high-income super-region (48·1 deaths [47·4-48·8] per 100 000 population) and southeast Asia, east Asia, and Oceania (23·2 deaths [16·3-37·2] per 100 000 population). Globally, life expectancy steadily improved between 1990 and 2019 for 18 of the 22 investigated causes. Decomposition of global and regional life expectancy showed the positive effect that reductions in deaths from enteric infections, lower respiratory infections, stroke, and neonatal deaths, among others have contributed to improved survival over the study period. However, a net reduction of 1·6 years occurred in global life expectancy between 2019 and 2021, primarily due to increased death rates from COVID-19 and other pandemic-related mortality. Life expectancy was highly variable between super-regions over the study period, with southeast Asia, east Asia, and Oceania gaining 8·3 years (6·7-9·9) overall, while having the smallest reduction in life expectancy due to COVID-19 (0·4 years). The largest reduction in life expectancy due to COVID-19 occurred in Latin America and the Caribbean (3·6 years). Additionally, 53 of the 288 causes of death were highly concentrated in locations with less than 50% of the global population as of 2021, and these causes of death became progressively more concentrated since 1990, when only 44 causes showed this pattern. The concentration phenomenon is discussed heuristically with respect to enteric and lower respiratory infections, malaria, HIV/AIDS, neonatal disorders, tuberculosis, and measles. INTERPRETATION Long-standing gains in life expectancy and reductions in many of the leading causes of death have been disrupted by the COVID-19 pandemic, the adverse effects of which were spread unevenly among populations. Despite the pandemic, there has been continued progress in combatting several notable causes of death, leading to improved global life expectancy over the study period. Each of the seven GBD super-regions showed an overall improvement from 1990 and 2021, obscuring the negative effect in the years of the pandemic. Additionally, our findings regarding regional variation in causes of death driving increases in life expectancy hold clear policy utility. Analyses of shifting mortality trends reveal that several causes, once widespread globally, are now increasingly concentrated geographically. These changes in mortality concentration, alongside further investigation of changing risks, interventions, and relevant policy, present an important opportunity to deepen our understanding of mortality-reduction strategies. Examining patterns in mortality concentration might reveal areas where successful public health interventions have been implemented. Translating these successes to locations where certain causes of death remain entrenched can inform policies that work to improve life expectancy for people everywhere. FUNDING Bill & Melinda Gates Foundation
STEPS: Slip Time Earthquake Path Simulations Applied to the San Andreas and Toe Jam Hill Faults to Redefine Geologic Slip Rate Uncertainty
Abstract Geologic slip rates are a time‐averaged measurement of fault displacement calculated over hundreds to million‐year time scales and are a primary input for probabilistic seismic hazard analyses, which forecast expected ground shaking in future earthquakes. Despite their utility for seismic hazard calculations, longer‐term geologic slip rates represent a time‐averaged measure of the tempo of strain release and do not measure variability across earthquake cycles. We have developed a numerical approach called STEPS (Slip Time Earthquake Path Simulations), which is built upon field‐based observations and explicitly incorporates realistic variations in displacement per event and variability in the recurrence interval between earthquakes. The STEPS approach, which simulates strain release through time, relies on representing earthquake cycles as stairsteps, rather than straight‐line paths, connecting per earthquake time‐displacement coordinates. We simulate earthquake histories based on these input constraints using two examples: the Carrizo section of the San Andreas fault and the Toe Jam Hill fault of the Seattle fault zone. We find that modeled slip rate distributions agree with slip rates reported for the sites of interest by the original investigators, while providing a slip rate distribution that reflects the variability of earthquake frequency and displacement. The STEPS approach provides an estimate of fault slip rate uncertainty based on a synthetic suite of plausible time‐displacement paths resulting from individual earthquakes, rather than measurement uncertainties associated with offset features. When considering this simulated earthquake behavior between measurements, the uncertainty associated with earthquake paths is greater than that calculated by the long‐term rate
Simplifying complex fault data for systems-level analysis: Earthquake geology inputs for U.S. NSHM 2023.
As part of the U.S. National Seismic Hazard Model (NSHM) update planned for 2023, two databases were prepared to more completely represent Quaternary-active faulting across the western United States: the NSHM23 fault sections database (FSD) and earthquake geology database (EQGeoDB). In prior iterations of NSHM, fault sections were included only if a field-measurement-derived slip rate was estimated along a given fault. By expanding this inclusion criteria, we were able to assess a larger set of faults for use in NSHM23. The USGS Quaternary Fault and Fold Database served as a guide for assessing possible additions to the NSHM23 FSD. Reevaluating available data from published sources yielded an increase of fault sections from ~650 faults in NSHM18 to ~1,000 faults proposed for use in NSHM23. EQGeoDB, a companion dataset linked to NSHM23 FSD, contains geologic slip rate estimates for fault sections included in FSD. Together, these databases serve as common input data used in deformation modeling, earthquake rupture forecasting, and additional downstream uses in NSHM development
Rapid Surface Rupture Mapping from Satellite Data: The 2023 Kahramanmaraş, Turkey (Türkiye), Earthquake Sequence
The 6 February 2023 Kahramanmaraş, Turkey (Türkiye), earthquake sequence produced > 500 km of surface rupture primarily on the left-lateral East Anatolian (~345 km) and Çardak (~175 km) faults. Constraining the length and magnitude of surface displacement on the causative faults is critical for loss estimates, recovery efforts, rapid identification of impacted infrastructure, and fault displacement hazard analysis. To support these efforts, we rapidly mapped the surface rupture from satellite data with support from remote sensing and field teams, and released the results to the public in near-real time. Detailed surface rupture mapping commenced on 7 February and continued as high-resolution (< 1.0 m/pixel) optical images from WorldView satellites (2023 Maxar) became available. We interpreted the initial simplified rupture trace from subpixel offset fields derived from Advanced Land Observation Satellite2 and Sentinel-1A synthetic aperture radar image pairs available on 8 and 10 February, respectively. The mapping was released publicly on 10 February, with frequent updates, and published in final form four months postearthquake (Reitman, Briggs, et al., 2023). This publicly available, rapid mapping helped guide fieldwork and constrained U.S. Geological Survey finite-fault and loss estimate models, as well as stress change estimates and dynamic rupture models
How similar was the 1983 Mw 6.9 Borah Peak earthquake rupture to its surface-faulting predecessors along the northern Lost River fault zone (Idaho, USA)?
We excavated trenches at two paleoseismic sites bounding a trans-basin bedrock ridge (the Willow Creek Hills) along the northern Lost River fault zone to explore the uniqueness of the 1983 Mw 6.9 Borah Peak earthquake compared to its prehistoric predecessors. At the Sheep Creek site on the southernmost Warm Springs section, two earthquakes occurred at 9.8–14.0 ka (95% confidence) and 6.5–7.1 ka; each had ~1.9 m of vertical displacement. About 4 km to the southeast, across the Willow Creek Hills, two ruptures at the Arentson Gulch site on the northernmost Thousand Springs section occurred at 9.0–14.7 ka and 6.1–7.5 ka with ~1.9 m of vertical displacement each. We synthesize these and previous paleoseismic results into a model of five postglacial (<15 ka) ruptures along a ~65 km reach of the northern Lost River fault zone. Our results show that the Borah Peak earthquake (34 km; 0.9 m mean displacement) was unique compared to previous ruptures that had both longer and shorter rupture lengths (~25–38 km), more displacement (mean of ~1.3–1.4 m), and equal or greater magnitude (Mw 6.9–7.1) than that in the 1983 earthquake. These ruptures support a hypothesis of variable rupture length and displacement on the northern Lost River fault zone and show that predecessors to the 1983 rupture have passed unimpeded through the Willow Creek Hills. Our work demonstrates that normal faults are capable of producing variable spatial-temporal patterns of rupture that, together with comparisons of fault geometry and historical rupture length, improve our understanding of fault segmentation and help inform models of earthquake rupture probability.This project was supported by the U.S. Geological Survey Earthquake Hazards Program