A stable FSI algorithm for light rigid bodies in compressible flow

In this article we describe a stable partitioned algorithm that overcomes the added mass instability arising in fluid-structure interactions of light rigid bodies and inviscid compressible flow. The new algorithm is stable even for bodies with zero mass and zero moments of inertia. The approach is based on a local characteristic projection of the force on the rigid body and is a natural extension of the recently developed algorithm for coupling compressible flow and deformable bodies. Normal mode analysis is used to prove the stability of the approximation for a one-dimensional model problem and numerical computations confirm these results. In multiple space dimensions the approach naturally reveals the form of the added mass tensors in the equations governing the motion of the rigid body. These tensors, which depend on certain surface integrals of the fluid impedance, couple the translational and angular velocities of the body. Numerical results in two space dimensions, based on the use of moving overlapping grids and adaptive mesh refinement, demonstrate the behavior and efficacy of the new scheme. These results include the simulation of the difficult problem of a shock impacting an ellipse of zero mass.Comment: 32 pages, 20 figure

Perceiving "Complex Autonomous Systems" in Symmetry Dynamics: Elementary Coordination Embedding in Circadian Cycles

This study explored the biological autonomy and control of function in circumstances that assessed the presumed relationship of an organism with an environmental cycle. An understanding of this behavior appeals to the organism–environment system rather than just the organism. Therefore, we sought to uncover the laws underlying end-directed capabilities by measuring biological characteristics (motor synchrony) in an environmental cycle (circadian temperature). We found that the typical elementary coordination (bimanual) stability measure varied significantly as a function of the day–night temperature cycle. While circadian effects under artificially manipulated temperatures were not straightforward during the day–night temperature cycle, the circadian effect divided by the ordinary circadian rhythm remained constant during the day–night cycle. Our observation of this direct, robust relationship between the biological characteristics (body temperature and motor synchrony) and environmental processes (circadian temperature cycle) could mirror the adaptation of our biological system to the environment

Constitutive modeling of deformation behavior of high-entropy alloys with face-centered cubic crystal structure

A constitutive model based on the dislocation glide and deformation twinning is adapted to face-centered cubic high-entropy alloys (HEAs) as exemplified by the CrMnFeCoNi system. In this model, the total dislocation density is considered as the only internal variable, while the evolution equation describing its variation during plastic deformation is governed by the volume fraction of twinned material. The suitability of the model for describing the strain hardening behavior of HEAs was verified experimentally through compression tests on alloy CrMnFeCoNi and its microstructure characterization by electron backscatter diffraction and X-ray diffraction using synchrotron radiation. ? 2017 The Author(s). Published by Informa UK Limited, trading as Taylor & Francis Group.1111Ysciescopu

Exciting high frequency oscillations in a coaxial transmission line with a magnetized ferrite: 2D approach

1D and 2D simulation methods and research into the formation of high frequency oscillations in a coaxial nonlinear transmission line (NLTL) partially filled with a longitudinally magnetized ferrite are presented. Dynamics and structure of the electromagnetic wave fields produced in the NLTL with a transverse inhomogeneity are studied for the first time within a 2D model. Means for optimizing the electromagnetic system parameters, NLTL dimensions, and degree of the line filling, needed to increase the electric strength and maximize oscillation intensity are discussed.Представлено методику та результати 1D- і 2D-чисельного моделювання процесу формування високочастотних коливань у коаксіальній нелінійній лінії, що частково заповнена феритом, який намагнічено повздовжнім магнітним полем. За допомогою 2D-моделі вперше досліджено динаміку та структуру хвильового поля нелінійної лінії з поперечною неоднорідністю. Обговорюється оптимізація діелектричних параметрів системи, розмірів лінії та ступеня її заповнення феромагнітним матеріалом, які необхідні для підвищення електричної стійкості та отримання максимальної інтенсивності коливань.Представлена методика и результаты 1D- и 2D-численного моделирования процесса формирования высокочастотных колебаний в коаксиальной нелинейной линии, частично заполненной ферритом, который намагничен продольным магнитным полем. С помощью 2D-модели впервые исследованы динамика и структура волнового поля нелинейной линии с поперечной неоднородностью. Обсуждается оптимизация диэлектрических параметров системы, размеров линии и степени ее заполнения ферримагнитным материалом, необходимых для повышения электрической прочности и получения максимальной интенсивности колебаний

Analysis of acoustic emission during the melting of embedded indium particles in an aluminum matrix: a study of plastic strain accommodation during phase transformation

Acoustic emission is used here to study melting and solidification of embedded indium particles in the size range of 0.2 to 3 um in diameter and to show that dislocation generation occurs in the aluminum matrix to accommodate a 2.5% volume change. The volume averaged acoustic energy produced by indium particle melting is similar to that reported for bainite formation upon continuous cooling. A mechanism of prismatic loop generation is proposed to accommodate the volume change and an upper limit to the geometrically necessary increase in dislocation density is calculated as 4.1 x 10^9 cm^-2 for the Al-17In alloy. Thermomechanical processing is also used to change the size and distribution of the indium particles within the aluminum matrix. Dislocation generation with accompanied acoustic emission occurs when the melting indium particles are associated with grain boundaries or upon solidification where the solid-liquid interfaces act as free surfaces to facilitate dislocation generation. Acoustic emission is not observed for indium particles that require super heating and exhibit elevated melting temperatures. The acoustic emission work corroborates previously proposed relaxation mechanisms from prior internal friction studies and that the superheat observed for melting of these micron-sized particles is a result of matrix constraint.Comment: Presented at "Atomistic Effects in Migrating Interphase Interfaces - Recent Progress and Future Study" TMS 201

Pseudogap formation of four-layer BaRuO3_3 and its electrodynamic response changes

We investiaged the optical properties of four-layer BaRuO$_{3}$, which shows a fermi-liquid-like behavior at low temperature. Its optical conductivity spectra clearly displayed the formation of a pseudogap and the development of a coherent peak with decreasing temperature. Temperature-dependences of the density $n$ and the scattering rate $1/\tau$ of the coherent component were also derived. As the temperature decreases, both $n$ and $1/\tau$ decrease for four-layer BaRuO$_{3}$. These electrodynamic responses were compared with those of nine-layer BaRuO$_{3}$, which also shows a pseudogap formation but has an insulator-like state at low temperature. It was found that the relative rates of change of both $n$ and $1/\tau$ determine either metallic or insulator-like responses in the ruthenates. The optical properties of the four-layer ruthenate were also compared with those of other pseudogap systems, such as high $T_{c}$ cuprates and heavy electron systems.Comment: 7 figures. submitted to Phys. Rev.

Measurements of Primary and Atmospheric Cosmic-Ray Spectra with the BESS-TeV Spectrometer

Primary and atmospheric cosmic-ray spectra were precisely measured with the BESS-TeV spectrometer. The spectrometer was upgraded from BESS-98 to achieve seven times higher resolution in momentum measurement. We report absolute fluxes of primary protons and helium nuclei in the energy ranges, 1-540 GeV and 1-250 GeV/n, respectively, and absolute flux of atmospheric muons in the momentum range 0.6-400 GeV/c.Comment: 26 pages, 9 figures, 3 tables, Submitted to Phys. Lett.

Atmospheric Neutrino Oscillations and New Physics

We study the robustness of the determination of the neutrino masses and mixing from the analysis of atmospheric and K2K data under the presence of different forms of phenomenologically allowed new physics in the nu_mu--nu_tau sector. We focus on vector and tensor-like new physics interactions which allow us to treat, in a model independent way, effects due to the violation of the equivalence principle, violations of the Lorentz invariance both CPT conserving and CPT violating, non-universal couplings to a torsion field and non-standard neutrino interactions with matter. We perform a global analysis of the full atmospheric data from SKI together with long baseline K2K data in the presence of nu_mu -> nu_tau transitions driven by neutrino masses and mixing together with sub-dominant effects due to these forms of new physics. We show that within the present degree of experimental precision, the extracted values of masses and mixing are robust under those effects and we derive the upper bounds on the possible strength of these new interactions in the nu_mu--nu_tau sector.Comment: 22 pages, LaTeX file using RevTEX4, 5 figures and 4 tables include

Direct Observations of Sigma Phase Formation in Duplex Stainless Steels using In Situ Synchrotron X-Ray Diffraction

The formation and growth of sigma phase in 2205 duplex stainless steel was observed and measured in real time using synchrotron radiation during 10 hr isothermal heat treatments at temperatures between 700 C and 850 C. Sigma formed in near-equilibrium quantities during the isothermal holds, starting from a microstructure which contained a balanced mixture of metastable ferrite and austenite. In situ synchrotron diffraction continuously monitored the transformation, and these results were compared to those predicted by thermodynamic calculations. Differences between the calculated and measured amounts of sigma, ferrite and austenite suggest that the thermodynamic calculations underpredict the sigma dissolution temperature by approximately 50 C. The data were further analyzed using a modified Johnson-Mehl-Avrami (JMA) approach to determine kinetic parameters for sigma formation over this temperature range. The initial JMA exponent, n, at low fractions of sigma was found to be approximately 7.0, however, towards the end of the transformation, n decreased to values of approximately 0.75. The change in the JMA exponent was attributed to a change in the transformation mechanism from discontinuous precipitation with increasing nucleation rate, to growth of the existing sigma phase after nucleation site saturation occurred. Because of this change in mechanism, it was not possible to determine reliable values for the activation energy and pre-exponential terms for the JMA equation. While cooling back to room temperature, the partial transformation of austenite resulted in a substantial increase in the ferrite content, but sigma retained its high temperature value to room temperature