Measurement of Natural Radioactivity, Radon Exhalation Rate and Radiation Hazard Assessment in Indian Cement Samples

AbstractBuilding materials are assumed to be the second source of Radon inside buildings. Due to low level of radon emanation from these materials, long term measurements are needed. Radiation doses from the building materials vary depending upon the natural radionuclides 226Ra, 232Th and their daughter products and 40K present in them. Cement is the main and important component used in the construction of buildings in many countries. These radio nuclides pose exposure risk due to their gamma ray emission and internally due to radon and its progeny that emit alpha particles. In the present study radon exhalation rate and the activity concentration of 226Ra, 232Th and 40K radionuclides in cement samples used in Aligarh region (U.P.), India have been measured by “Sealed Can technique” using LR-115 type II detectors and a low level NaI (Tl) based gamma ray spectrometer, respectively. From the measurements activity concentration of radionuclides 226Ra, 232Th and 40K vary from 9 to 28 Bq kg-1, 21 to 43 Bq kg-1 and 280 to 554 Bq kg-1 with overall average value of 19 Bq kg-1,35 Bq kg-1 and 406.7 Bq kg -1 respectively. Radon equivalent activity (Raeq) and external hazard index (Hex) have been found to vary from 60.8 to 121 Bq kg-1 and 0.16 to 0.30 respectively. The values are lower than the recommended safe values

Phase Separation Based on U(1) Slave-boson Functional Integral Approach to the t-J Model

We investigate the phase diagram of phase separation for the hole-doped two dimensional system of antiferromagnetically correlated electrons based on the U(1) slave-boson functional integral approach to the t-J model. We show that the phase separation occurs for all values of J/t, that is, whether $0 < J/t < 1$ or $J/t \geq 1$ with J, the Heisenberg coupling constant and t, the hopping strength. This is consistent with other numerical studies of hole-doped two dimensional antiferromagnets. The phase separation in the physically interesting J region, $0 < J/t \lesssim 0.4$ is examined by introducing hole-hole (holon-holon) repulsive interaction. We find from this study that with high repulsive interaction between holes the phase separation boundary tends to remain robust in this low $J$ region, while in the high J region, J/t > 0.4, the phase separation boundary tends to disappear.Comment: 4 pages, 2 figures, submitted to Phys. Rev.

Blood pressure and metabolic effects of acetyl-L-carnitine in type 2 diabetes: DIABASI randomized controlled trial

Context: Acetyl-L-carnitine (ALC), a mitochondrial carrier involved in lipid oxidation and glucose metabolism, decreased systolic blood pressure (SBP), and ameliorated insulin sensitivity in hypertensive nondiabetic subjects at high cardiovascular risk. Objective: To assess the effects of ALC on SBP and glycemic and lipid control in patients with hypertension, type 2 diabetes mellitus (T2D), and dyslipidemia on background statin therapy. Design: After 4-week run-in period and stratification according to previous statin therapy, patients were randomized to 6-month, double-blind treatment with ALC or placebo added-on simvastatin. Setting: Five diabetology units and one clinical research center in Italy. Patients: Two hundred twenty-nine patients with hypertension and dyslipidemic T2D &gt; 40 years with stable background antihypertensive, hypoglycemic, and statin therapy and serum creatinine &lt; 1.5 mg/ dL. Interventions: Oral ALC 1000 mg or placebo twice daily on top of stable simvastatin therapy. Outcome and Measures: Primary outcome was SBP. Secondary outcomes included lipid and glycemic profiles. Total-body glucose disposal rate and glomerular filtration rate were measured in subgroups by hyperinsulinemic-euglycemic clamp and iohexol plasma clearance, respectively. Results: SBP did not significantly change after 6-month treatment with ALC compared with placebo (-2.09mmHg vs-3.57mmHg, P = 0.9539). Serum cholesterol, triglycerides, and lipoprotein(a), as well as blood glucose, glycated hemoglobin, fasting insulin levels, homeostatic model assessment of insulin resistance index, glucose disposal rate, and glomerular filtration rate did not significantly differ between treatments. Adverse events were comparable between groups. Conclusions: Six-month oral ALC supplementation did not affect blood pressure, lipid and glycemic control, insulin sensitivity and kidney function in hypertensive normoalbuminuric and microalbuminuric T2D patients on background statin therapy

Production of e+e−e^+e^- Pairs Accompanied by Nuclear Dissociation in Ultra-Peripheral Heavy Ion Collision

We present the first data on $e^+e^-$ pair production accompanied by nuclear breakup in ultra-peripheral gold-gold collisions at a center of mass energy of 200 GeV per nucleon pair. The nuclear breakup requirement selects events at small impact parameters, where higher-order corrections to the pair production cross section should be enhanced. We compare the pair kinematic distributions with two calculations: one based on the equivalent photon approximation, and the other using lowest-order quantum electrodynamics (QED); the latter includes the photon virtuality. The cross section, pair mass, rapidity and angular distributions are in good agreement with both calculations. The pair transverse momentum, $p_T$, spectrum agrees with the QED calculation, but not with the equivalent photon approach. We set limits on higher-order contributions to the cross section. The $e^+$ and $e^-$ $p_T$ spectra are similar, with no evidence for interference effects due to higher-order diagrams.Comment: 6 pages with 3 figures Slightly modified version that will appear in Phys. Rev.

3D zero-thickness coupled interface finite element:Formulation and application

In many fields of geotechnical engineering, the modelling of interfaces requires special numerical tools. This paper presents the formulation of a 3D fully coupled hydro-mechanical finite element of interface. The element belongs to the zero-thickness family and the contact constraint is enforced by the penalty method. Fluid flow is discretised through a three-node scheme, discretising the inner flow by additional nodes. The element is able to reproduce the contact/loss of contact between two solids as well as shearing/sliding of the interface. Fluid flow through and across the interface can be modelled. Opening of a gap within the interface influences the longitudinal transmissivity as well as the storage of water inside the interface. Moreover the computation of an effective pressure within the interface, according to the Terzaghi’s principle creates an additional hydro-mechanical coupling. The uplifting simulation of a suction caisson embedded in a soil layer illustrates the main features of the element. Friction is progressively mobilised along the shaft of the caisson and sliding finally takes place. A gap is created below the top of the caisson and filled with water. It illustrates the storage capacity within the interface and the transversal flow. Longitudinal fluid flow is highlighted between the shaft of the caisson and the soil. The fluid flow depends on the opening of the gap and is related to the cubic law

Measurement of the B0-anti-B0-Oscillation Frequency with Inclusive Dilepton Events

The $B^0$-$\bar B^0$ oscillation frequency has been measured with a sample of 23 million \B\bar B pairs collected with the BABAR detector at the PEP-II asymmetric B Factory at SLAC. In this sample, we select events in which both B mesons decay semileptonically and use the charge of the leptons to identify the flavor of each B meson. A simultaneous fit to the decay time difference distributions for opposite- and same-sign dilepton events gives $\Delta m_d = 0.493 \pm 0.012{(stat)}\pm 0.009{(syst)}$ ps$^{-1}$.Comment: 7 pages, 1 figure, submitted to Physical Review Letter