Storage and feeding of coal

Reliable feeding of coal from storage bins to process requires the knowledge of the behavior of coal during flow. The study of the flow of bulk solids was undertaken in the 1950's and led to the development of flow ability testing equipment and of the Mass Flow concept of design for reliable flow. The theory has since been expanded to two-phase, solids-gas system, and has found world wide application in the design of storage and feeding systems

Temperature and time consolidation effect on the bulk flow properties and arching tendency of a detergent powder

Time consolidation flow properties of a commercial detergent powder were measured at elevated temperature of 27 °C, 37 °C and 47 °C with the Brookfield Powder Flow Tester (PFT). A substantial increase of powder cohesion was observed at elevated temperature and after time consolidation. The Jenike method for silo design was used to correlate the powder time consolidation flow properties at elevated temperature to critical outlet slot to attain arch‐free silo. The dependence of the critical diameter on temperature and time consolidation is successfully described by the model

Structured randomness: Jamming of soft discs and pins

Simulations are used to find the zero temperature jamming threshold, $\phi_j$, for soft, bidisperse disks in the presence of small fixed particles, or "pins", arranged in a lattice. The presence of pins leads, as one expects, to a decrease in $\phi_j$. Structural properties of the system near the jamming threshold are calculated as a function of the pin density. While the correlation length exponent remains $\nu = 1/2$ at low pin densities, the system is mechanically stable with more bonds, yet fewer contacts than the Maxwell criterion implies in the absence of pins. In addition, as pin density increases, novel bond orientational order and long-range spatial order appear, which are correlated with the square symmetry of the pin lattice.Comment: 9 pages, 11 figures, 1 table; This is v2 of an article, revised thanks to peer revie

Human oral processing and texture profile analysis parameters: bridging the gap between the sensory evaluation and the instrumental measurements

Studies in food oral processing are becoming increasingly important with the advent of the aged society. The food oral processing model of Hutchings and Lillford (Journal of Texture Studies, 19, 1988, 103–115) describes the structural breakdown and lubrication of ingested food before the swallowing stage, and has been revisited in the present article. The instrumental technique texture profile analysis (TPA) purports to mimic the first two bites of mastication and its ease of use has lured some researchers to use it without a critical eye. In this article, we consider inconsistencies in the Hutchings and Lillford model with the hope that it might be further refined. With regard to TPA we question the validity of the data generated and urge authors caution before they publish results from the test protocol. If results are published then the x‐axis should be viewed as deformation or strain, and not time. Hardness should be represented by the breaking stress. Adhesiveness should be measured at a medium strain taking into account the surface properties of the plunger. The ratio of the energy estimated by the area under the curve obtained from the second and the first bites (A2/A1) should be called recoverability and not cohesiveness

A stochastic flow rule for granular materials

There have been many attempts to derive continuum models for dense granular flow, but a general theory is still lacking. Here, we start with Mohr-Coulomb plasticity for quasi-2D granular materials to calculate (average) stresses and slip planes, but we propose a "stochastic flow rule" (SFR) to replace the principle of coaxiality in classical plasticity. The SFR takes into account two crucial features of granular materials - discreteness and randomness - via diffusing "spots" of local fluidization, which act as carriers of plasticity. We postulate that spots perform random walks biased along slip-lines with a drift direction determined by the stress imbalance upon a local switch from static to dynamic friction. In the continuum limit (based on a Fokker-Planck equation for the spot concentration), this simple model is able to predict a variety of granular flow profiles in flat-bottom silos, annular Couette cells, flowing heaps, and plate-dragging experiments -- with essentially no fitting parameters -- although it is only expected to function where material is at incipient failure and slip-lines are inadmissible. For special cases of admissible slip-lines, such as plate dragging under a heavy load or flow down an inclined plane, we postulate a transition to rate-dependent Bagnold rheology, where flow occurs by sliding shear planes. With different yield criteria, the SFR provides a general framework for multiscale modeling of plasticity in amorphous materials, cycling between continuum limit-state stress calculations, meso-scale spot random walks, and microscopic particle relaxation

Relationship between single and bulk mechanical properties for zeolite ZSM5 spray-dried particles

In this work typical mechanical properties for a catalyst support material, ZSM5 (a spray-dried granular zeolite), have been measured in order to relate the bulk behaviour of the powder material to the single particle mechanical properties. Particle shape and size distribution of the powders, determined by laser diffraction and scanning electron microscopy (SEM), confirmed the spherical shape of the spray-dried particles. The excellent flowability of the material was assessed by typical methods such as the Hausner ratio and the Carr index. This was confirmed by bulk measurements of the particle–particle internal friction parameter and flow function using a Schulze shear cell, which also illustrated the low compressibility of the material. Single particle compression was used to characterize single particle mechanical proper-ties such as reduced elastic modulus and strength from Hertz contact mechanics theory. Comparison with surface properties obtained from nanoindentation suggests heterogeneity, the surface being harder than the core. In order to evaluate the relationship between single particle mechanical properties and bulk compression behaviour, uniaxial confined compression was carried out. It was determined that the Adams model was suitable for describing the bulk compression and furthermore that the Adams model parameter, apparent strength of single particles, was in good agreement with the single particle strength determined from single particle compression test

DBT-enhanced cognitive-behavioral treatment for trichotillomania: A randomized controlled trial

Background and aims: Limited treatment options are available for trichotillomania (TTM) and most have modest outcomes. Suboptimal treatment results may be due to the failure of existing approaches to address all TTM styles. Methods: Thirty-eight DSM-IV TTM participants were randomly assigned across two study sites to Dialectical Behavior Therapy (DBT) -enhanced cognitive-behavioral treatment (consisting of an 11-week acute treatment and 3-month maintenance treatment) or a minimal attention control (MAC) condition. MAC participants had active treatment after the 11-week control condition. Follow-up study assessments were conducted three and six months after the maintenance period. Results: Open trial treatment resulted in significant improvement in TTM severity, emotion regulation (ER) capacity, experiential avoidance, anxiety and depression with changes generally maintained over time. In the randomized controlled trial, those with active treatment had greater improvement than those in the MAC condition for both TTM severity and ER capacity. Correlations between changes in TTM severity and ER capacity were not reported at post-treatment but did occur in maintenance and follow-up indicating reduced TTM severity with improved ER capacity. Conclusions: DBT-enhanced cognitive-behavioral treatment is a promising treatment for TTM. Future studies should compare this approach to other credible treatment interventions and investigate the efficacy of this approach in more naturalistic samples with greater comorbidity

A quantitative approach for measuring the reservoir of latent HIV-1 proviruses.

A stable latent reservoir for HIV-1 in resting CD4+ T cells is the principal barrier to a cure1-3. Curative strategies that target the reservoir are being tested4,5 and require accurate, scalable reservoir assays. The reservoir was defined with quantitative viral outgrowth assays for cells that release infectious virus after one round of T cell activation1. However, these quantitative outgrowth assays and newer assays for cells that produce viral RNA after activation6 may underestimate the reservoir size because one round of activation does not induce all proviruses7. Many studies rely on simple assays based on polymerase chain reaction to detect proviral DNA regardless of transcriptional status, but the clinical relevance of these assays is unclear, as the vast majority of proviruses are defective7-9. Here we describe a more accurate method of measuring the HIV-1 reservoir that separately quantifies intact and defective proviruses. We show that the dynamics of cells that carry intact and defective proviruses are different in vitro and in vivo. These findings have implications for targeting the intact proviruses that are a barrier to curing HIV infection