295 research outputs found
Limb bone scaling in hopping diprotodonts and quadrupedal artiodactyls
Bone adaptation is modulated by the timing, direction, rate, and magnitude of mechanical loads. To investigate whether frequent slow, or infrequent fast, gaits could dominate bone adaptation to load, we compared scaling of the limb bones from two mammalian herbivore clades that use radically different high-speed gaits, bipedal hopping and quadrupedal galloping. Forelimb and hindlimb bones were collected from 20 artiodactyl and 15 diprotodont species (body mass M 1.05 - 1536 kg) and scanned in clinical computed tomography or X-ray microtomography. Second moment of area (Imax) and bone length (l) were measured. Scaling relations (y = axb) were calculated for l vs M for each bone and for Imax vs M and Imax vs l for every 5% of length. Imax vs M scaling relationships were broadly similar between clades despite the diprotodont forelimb being nearly unloaded, and the hindlimb highly loaded, during bipedal hopping. Imax vs l and l vs M scaling were related to locomotor and behavioural specialisations. Low-intensity loads may be sufficient to maintain bone mass across a wide range of species. Occasional high-intensity gaits might not break through the load sensitivity saturation engendered by frequent low-intensity gaits
Altered lacunar and vascular porosity in osteogenesis imperfecta mouse bone as revealed by synchrotron tomography contributes to bone fragility
Osteogenesis imperfecta (brittle bone disease) is caused by mutations in the collagen genes and results in skeletal fragility. Changes in bone porosity at the tissue level indicate changes in bone metabolism and alter bone mechanical integrity. We investigated the cortical bone tissue porosity of a mouse model of the disease, oim, in comparison to a wild type (WT-C57BL/6), and examined the influence of canal architecture on bone mechanical performance.High-resolution 3D representations of the posterior tibial and the lateral humeral mid-diaphysis of the bones were acquired for both mouse groups using synchrotron radiation-based computed tomography at a nominal resolution of 700 nm. Volumetric morphometric indices were determined for cortical bone, canal network and osteocyte lacunae. The influence of canal porosity architecture on bone mechanics was investigated using microarchitectural finite element (?FE) models of the cortical bone. Bright-field microscopy of stained sections was used to determine if canals were vascular.Although total cortical porosity was comparable between oim and WT bone, oim bone had more numerous and more branched canals (p < 0.001), and more osteocyte lacunae per unit volume compared to WT (p < 0.001). Lacunae in oim were more spherical in shape compared to the ellipsoidal WT lacunae (p < 0.001). Histology revealed blood vessels in all WT and oim canals. ?FE models of cortical bone revealed that small and branched canals, typical of oim bone, increase the risk of bone failure. These results portray a state of compromised bone quality in oim bone at the tissue level, which contributes to its deficient mechanical properties
Leap into... collaborative learning
Part of a collection of documents from Leap, formerly a University of Adelaide website providing information about learning and teaching initiatives at the University, archived in PDF format 26th April 2012.Includes 5 pp. questionnaire, developed by Ann Noble in 2000.This publication is designed for University of Adelaide staff who are interested in collaborative learning—what it is and how it can be put into practice to enhance learning and teaching.Christine Ingleton, Loene Doube and Tim Rogers for the University of Adelaide ACU
Iodine Vapor Staining for Atomic Number Contrast in Backscattered Electron and X-Ray Imaging
The Wellcome Trust (X‐ray microtomography scanner at RVC). Grant Number: 093234EPSRC Career Acceleration Fellowship. Grant Number: EP/H004025/1The Wellcome Trust (X-ray microtomography scanner
at RVC); Contract grant number: 093234; Contract grant sponsor: EPSRC
Career Acceleration Fellowship (to R.J.B.); Contract grant number: EP/
H004025/
The plate-to-rod transition in trabecular bone loss is elusive.
Changes in trabecular micro-architecture are key to our understanding of osteoporosis. Previous work focusing on structure model index (SMI) measurements have concluded that disease progression entails a shift from plates to rods in trabecular bone, but SMI is heavily biased by bone volume fraction. As an alternative to SMI, we proposed the ellipsoid factor (EF) as a continuous measure of local trabecular shape between plate-like and rod-like extremes. We investigated the relationship between EF distributions, SMI and bone volume fraction of the trabecular geometry in a murine model of disuse osteoporosis as well as from human vertebrae of differing bone volume fraction. We observed a moderate shift in EF median (at later disease stages in mouse tibia) and EF mode (in the vertebral samples with low bone volume fraction) towards a more rod-like geometry, but not in EF maximum and minimum. These results support the notion that the plate to rod transition does not coincide with the onset of bone loss and is considerably more moderate, when it does occur, than SMI suggests. A variety of local shapes not straightforward to categorize as rod or plate exist in all our trabecular bone samples
Novel naturally derived whey protein isolate and aragonite biocomposite hydrogels have potential for bone regeneration
This work explores novel biocomposite hydrogels fabricated using 40% (wt/vol) solution of whey protein isolate (WPI, from the food industry) mixed with increasing concentrations of synthetic aragonite rod-like powder of 0, 100, 200 and 300 mg/ml (named WPI0, WPI100, WPI200 and WPI300). FTIR results showed that aragonite was successfully incorporated into the WPI hydrogel network. SEM and micro-CT investigations revealed that aragonite was mainly concentrated near the edges of the composite samples, except in WPI300, which had homogeneous aragonite distribution. The pore diameters ranged from 18 to 778 μm while averaged pore size was the lowest for WPI0 at 30 μm and highest for WPI200 at 103 μm. The mean compression modulus was highest for WPI300 at 3.16 MPa. After 28 days in physiological conditions WPI300 had maximum mean swelling of 4.3% and there was the highest degradation rate for WPI200 and WPI300 and lowest for WPI100 and WPI0. The osteoblast-like MG63 cell metabolic and alkaline phosphatase activities in direct contact experiments with composites increased with increasing aragonite content over 3 weeks. Moreover, the degradation products of these composites were non-cytotoxic and led to mineral-like deposits in extracellular matrix. These WPI-aragonite biocomposite hydrogels are potent candidates for bone repair applications
Stable sulforaphane protects against gait anomalies and modifies bone microarchitecture in the spontaneous STR/Ort model of osteoarthritis
Osteoarthritis (OA), affecting joints and bone, causes physical gait disability with huge socio-economic burden; treatment remains palliative. Roles for antioxidants in protecting against such chronic disorders have been examined previously. Sulforaphane is a naturally occurring antioxidant. Herein, we explore whether SFX-01®, a stable synthetic form of sulforaphane, modifies gait, bone architecture and slows/reverses articular cartilage destruction in a spontaneous OA model in STR/Ort mice. Sixteen mice (n = 8/group) were orally treated for 3 months with either 100 mg/kg SFX-01® or vehicle. Gait was recorded, tibiae were microCT scanned and analysed. OA lesion severity was graded histologically. The effect of SFX-01® on bone turnover markers in vivo was complemented by in vitro bone formation and resorption assays. Analysis revealed development of OA-related gait asymmetry in vehicle-treated STR/Ort mice, which did not emerge in SFX-01®-treated mice. We found significant improvements in trabecular and cortical bone. Despite these marked improvements, we found that histologically-graded OA severity in articular cartilage was unmodified in treated mice. These changes are also reflected in anabolic and anti-catabolic actions of SFX-01® treatment as reflected by alteration in serum markers as well as changes in primary osteoblast and osteoclast-like cells in vitro. We report that SFX-01® improves bone microarchitecture in vivo, produces corresponding changes in bone cell behaviour in vitro and leads to greater symmetry in gait, without marked effects on cartilage lesion severity in STR/Ort osteoarthritic mice. Our findings support both osteotrophic roles and novel beneficial gait effects for SFX-01® in this model of spontaneous OA
In Vivo Time- Resolved Microtomography Reveals the Mechanics of the Blowfly Flight Motor
Dipteran flies are amongst the smallest and most agile of flying animals. Their wings are driven indirectly by large power muscles, which cause cyclical deformations of the thorax that are amplified through the intricate wing hinge. Asymmetric flight manoeuvres are controlled by 13 pairs of steering muscles acting directly on the wing articulations. Collectively the steering muscles account for <3% of total flight muscle mass, raising the question of how they can modulate the vastly greater output of the power muscles during manoeuvres. Here we present the results of a synchrotron-based study performing micrometre-resolution, time-resolved microtomography on the 145 Hz wingbeat of blowflies. These data represent the first four-dimensional visualizations of an organism's internal movements on sub-millisecond and micrometre scales. This technique allows us to visualize and measure the three-dimensional movements of five of the largest steering muscles, and to place these in the context of the deforming thoracic mechanism that the muscles actuate. Our visualizations show that the steering muscles operate through a diverse range of nonlinear mechanisms, revealing several unexpected features that could not have been identified using any other technique. The tendons of some steering muscles buckle on every wingbeat to accommodate high amplitude movements of the wing hinge. Other steering muscles absorb kinetic energy from an oscillating control linkage, which rotates at low wingbeat amplitude but translates at high wingbeat amplitude. Kinetic energy is distributed differently in these two modes of oscillation, which may play a role in asymmetric power management during flight control. Structural flexibility is known to be important to the aerodynamic efficiency of insect wings, and to the function of their indirect power muscles. We show that it is integral also to the operation of the steering muscles, and so to the functional flexibility of the insect flight motor
Grading of recommendations, assessment, development and evaluations concept 7: issues and insights linking guideline recommendations to trustworthy essential medicine lists
Objectives: Guidelines and essential medicine lists (EMLs) bear similarities and differences in the process that lead to decisions. Access to essential medicines is central to achieve universal health coverage. The World Health Organization (WHO) EML has guided prioritization of essential medicines globally for nearly 50 years, and national EMLs (NEMLs) exist in over 130 countries. Guideline and EML decisions, at WHO or national levels, are not always coordinated and aligned. We sought to explore challenges, and potential solutions, for decision-making to support trustworthy medicine selection for EMLs from a Grading of Recommendations, Assessment, Development and Evaluations (GRADE) Working Group perspective. We primarily focus on the WHO EML; however, our findings may be applicable to NEML decisions as well. Study Design and Setting: We identified key challenges in connecting the EML to health guidelines by involving a broad group of stakeholders and assessing case studies including real applications to the WHO EML, South Africa NEML, and a multiple sclerosis guideline connected to a WHO EML application for multiple sclerosis treatments. To address challenges, we utilized the results of a survey and feedback from the stakeholders, and iteratively met as a project group. We drafted a conceptual framework of challenges and potential solutions. We presented a summary of the results for feedback to all attendees of the GRADE Working Group meetings in November 2022 (approximately 120 people) and in May 2023 (approximately 100 people) before finalizing the framework. Results: We prioritized issues and insights/solutions that addressed the connections between the EML and health guidelines. Our suggested solutions include early planning alignment of guideline groups and EMLs, considering shared participation to strengthen linkage, further clarity on price/cost considerations, and using explicit shared criteria to make guideline and EML decisions. We also provide recommendations to strengthen the connection between WHO EML and NEMLs including through contextualization methods. Conclusion: This GRADE concept article, jointly developed by key stakeholders from the guidelines and EMLs field, identified key conceptual issues and potential solutions to support the continued advancement of trustworthy EMLs. Adopting structured decision criteria that can be linked to guideline recommendations bears the potential to advance health equity and gaps in availability of essential medicines within and between countries
- …