93 research outputs found
Multi MeV protons, deuterons and carbon ions produced by the PALS laser system
Multi MeV ions and fusion neutrons were generated by focused radiation of the 3 TW Prague Asterix Laser System (PALS). The use of 8 μm Al foil as XUV filter positioned in front of an ion collector allowed measuring currents of 4-MeV protons emitted behind a thin target in the forward direction. The proton energy of 4 MeV generated by a PALS laser irradiance Iλ2~5×1016 W cm-2 μm2 on target is nominally reachable for picosecond lasers when they deliver the intensity Iλ2~3×1018 W cm-2 μm2. The enhanced maximum proton energy is favoured by a non-linear interaction of the laser beam with the pre-generated plasma. Nonlinear processes also cause enhancement in the yield of fusion neutrons per focused laser energy from the CD2 plasma. The obtained results show that an equivalent neutron yield was reached by ps- and sub-ps laser beams for Iλ2~1019 W cm-2 μm2. The hampering influence of the electromagnetic pulse generated within the interaction chamber on diagnostics signals was eliminated
Thomson parabola spectrometry of laser generated plasma at PALS laboratory
Laser generated Plasma has been obtained at PALS laboratory in Prague irradiating thin films by Target Normal Sheath Acceleration (TNSA) regime. The irradiated targets were polymers and metals with embedded nanostructures and different thicknesses. In the present work, plasma has been characterized by using Thomson Parabola Spectrometer placed in forward direction. The regime of laser intensity was of the order of 1016W/cm2 at 1.3 μm wavelength. Simulations performed by TOSCA code have been employed to compare theoretical prevision with experimental data. This approach permitted the recognition of parabolas and the evaluations of ion charge, energy and mass-to-charge ratio. Results revealed that the maximum ion acceleration is obtained n metallic foils for optimal thickness of the order of 10 μm and for target containing nanostructures responsible for the increase of the plasma electron density and resonant absorption effect, as will be presented and discussed
Irradiation of luminescence dosimeters in pulsed mixed radiation fields
UHDpulse - Metrology for Advanced Radiotherapy using beams with Ultra-High
Pulse Dose Rates is a European project aimed at developing novel dosimetry
standards, as well as improving existing ones, for FLASH radiotherapy, very
high energy electrons radiotherapy, and laser-driven medical accelerators.
Within the scope of this project, Thermoluminescence (TL) and Optically
Stimulated Luminescence (OSL) detectors are used to measure stray radiation
fields. Experiments performed with conventional pulsed particle-beams allow to
characterize the dosimeters in known and controllable radiation fields. In
turn, this allows to develop models and predict their behavior in complex
radiation fields, such as those at laser-driven and FLASH facilities. TL and
OSL detectors were irradiated at the Microtron MT25 electron accelerator in
Prague, Czech Republic. GAFChromicTM films and plastic nuclear track detectors
were used to study the beam profile and the neutron background respectively.
The responses of the different detector to the pulsed mixed radiation fields of
the Microtron MT25 are compared among each other and presented in this paper
Evidence of resonant surface wave excitation in the relativistic regime through measurements of proton acceleration from grating targets
The interaction of laser pulses with thin grating targets, having a periodic
groove at the irradiated surface, has been experimentally investigated.
Ultrahigh contrast () pulses allowed to demonstrate an enhanced
laser-target coupling for the first time in the relativistic regime of
ultra-high intensity >10^{19} \mbox{W/cm}^{2}. A maximum increase by a factor
of 2.5 of the cut-off energy of protons produced by Target Normal Sheath
Acceleration has been observed with respect to plane targets, around the
incidence angle expected for resonant excitation of surface waves. A
significant enhancement is also observed for small angles of incidence, out of
resonance.Comment: 5 pages, 5 figures, 2nd version implements final correction
Semiconductor Detectors for Observation of Multi-MeV Protons and Ions Produced by Lasers
The application of time-of-flight Faraday cups and SiC detectors for the measurement of currents of fast ions emitted by laser-produced plasmas is reported. Presented analysis of signals of ion detectors reflects the design and construction of the detector used. A similarity relation between output signals of ion collectors and semiconductor detectors is established. Optimization of the diagnostic system is discussed with respect to the emission time of electromagnetic pulses interfering with signals induced by the fastest ions accelerated up to velocities of 107 m/s. The experimental campaign on laser-driven ion acceleration was performed at the PALS facility in Prague
The influence of an intense laser beam interaction with preformed plasma on the characteristics of emitted ion streams
AbstractIntense laser-beam interactions with preformed plasma, preceding the laser-target interactions, significantly influence both the ion and X-ray generation. It is due to the laser pulse (its total length, the shape of the front edge, its background, the contrast, the radial homogeneity) as well as plasma (density, temperature) properties. Generation of the super fast (FF) ion groups is connected with a presence of non-linear processes. Saturated maximum of the charge states (independently on the laser intensity) is ascribed to the constant limit radius of the self-focused laser beam. Its longitudinal structure is considered as a possible explanation for the course of some experimental dependencies obtained
ELIMED: MEDICAL APPLICATION AT ELI-BEAMLINES. STATUS OF THE COLLABORATION AND FIRST RESULTS
ELI-Beamlines is one of the four pillars of the ELI (Extreme Light Infrastructure) pan-European project. It will be an ultrahigh-intensity, high repetition-rate, femtosecond laser facility whose main goal is to generate and apply high-brightness X-ray sources and accelerated charged particles. In particular, medical applications are treated by the ELIMED task force, which has been launched by collaboration between ELI and INFN researchers. ELIMED aims to demonstrate the clinical applicability of laser accelerated ions. In this article, the state of the ELIMED project and the first scientific results are reported. The design and realisation of a preliminary beam handling system and of an advanced spectrometer for diagnostics of high energy (multi-MeV) laser-accelerated ion beams will also be briefly presented
DIAMOND DETECTORS FOR CHARACTERIZATION OF LASER-GENERATED PLASMA
Abstract -CVD mono-crystalline diamond films were employed as detectors of the Introduction -Laser-generated plasma is characterized by high temperature and density
Study of laser plasma emission from doped targets
In this work, the characteristics of laser plasma produced by ablation of pure and doped targets are studied. An excimer KrF laser was used to induce ablation. Pure Cu, Cu with 2% of Be, and Cu with 4% of Sn targets were ablated to evaluate the influence of these admixture on the emission of Cu ions. It was observed that the emission of ions exhibited a higher gain from the Cu/Be and Cu/Sn targets with respect to the pure Cu one. We also performed studied of ion velocity and charge angular distribution
- …