Control of Ship capsize in stern quartering seas.

A non-linear mathematical model for the roll-yaw behaviour of a ship is used to predict capsize of a small tanker which sank in the North Sea some years ago. This capsize problem was initially simulated on an analogue computer by the Danish Maritime Authorities as well as being tank tested. The problem was simulated using the digital package SIMULINK, which produced comparable results indicating instability in waves of just less than 3 m in height. Validation of the results is attempted and a discussion of possible improvements to the model is given. Simulated responses of the tanker with simple hydrodynamic fin stabilisers show that capsize could have been prevented by this means in waves up to 7 m in height. Active PID control using a simple full span elevon is used to show a factor of ten reduction in roll angle to much greater waves. This work is of use to ship designers illustrating that stability can be enhanced for a fraction of the cost of major redesign of the ship hull and can be tailored to load conditions

An analytical approach to sorting in periodic potentials

There has been a recent revolution in the ability to manipulate micrometer-sized objects on surfaces patterned by traps or obstacles of controllable configurations and shapes. One application of this technology is to separate particles driven across such a surface by an external force according to some particle characteristic such as size or index of refraction. The surface features cause the trajectories of particles driven across the surface to deviate from the direction of the force by an amount that depends on the particular characteristic, thus leading to sorting. While models of this behavior have provided a good understanding of these observations, the solutions have so far been primarily numerical. In this paper we provide analytic predictions for the dependence of the angle between the direction of motion and the external force on a number of model parameters for periodic as well as random surfaces. We test these predictions against exact numerical simulations

Estimating the economic burden of cardiovascular events in patients receiving lipid-modifying therapy in the UK.

OBJECTIVES: To characterise the costs to the UK National Health Service of cardiovascular (CV) events among individuals receiving lipid-modifying therapy. DESIGN: Retrospective cohort study using Clinical Practice Research Datalink records from 2006 to 2012 to identify individuals with their first and second CV-related hospitalisations (first event and second event cohorts). Within-person differences were used to estimate CV-related outcomes. SETTING: Patients in the UK who had their first CV event between January 2006 and March 2012. PARTICIPANTS: Patients ≥18 years who had a CV event and received at least 2 lipid-modifying therapy prescriptions within 180 days beforehand. PRIMARY AND SECONDARY OUTCOME MEASURES: Direct medical costs (2014 £) were estimated in 3 periods: baseline (pre-event), acute (6 months afterwards) and long-term (subsequent 30 months). Primary outcomes included incremental costs, resource usage and total costs per period. RESULTS: There were 24 093 patients in the first event cohort of whom 5274 were included in the second event cohort. The mean incremental acute CV event costs for the first event and second event cohorts were: coronary artery bypass graft/percutaneous transluminal coronary angioplasty (CABG/PTCA) £5635 and £5823, myocardial infarction £4275 and £4301, ischaemic stroke £3512 and £4572, heart failure £2444 and £3461, unstable angina £2179 and £2489 and transient ischaemic attack £1537 and £1814. The mean incremental long-term costs were: heart failure £848 and £2829, myocardial infarction £922 and £1385, ischaemic stroke £973 and £682, transient ischaemic attack £705 and £1692, unstable angina £328 and £677, and CABG/PTCA £-368 and £599. Hospitalisation accounted for 95% of acute and 61% of long-term incremental costs. Higher comorbidity was associated with higher long-term costs. CONCLUSIONS: Revascularisation and myocardial infarction were associated with the highest incremental costs following a CV event. On the basis of real-world data, the economic burden of CV events in the UK is substantial, particularly among those with greater comorbidity burden

Anomalous increase in nematic-isotropic transition temperature in dimer molecules induced by magnetic field

We have determined the nematic-isotropic transition temperature as a function of applied magnetic field in three different thermotropic liquid crystalline dimers. These molecules are comprised of two rigid calamitic moieties joined end to end by flexible spacers with odd numbers of methylene groups. They show an unprecedented magnetic field enhancement of nematic order in that the transition temperature is increased by up to 15K when subjected to 22T magnetic field. The increase is conjectured to be caused by a magnetic field-induced decrease of the average bend angle in the aliphatic spacers connecting the rigid mesogenic units of the dimers

Does My Stigma Look Big in This? Considering the acceptability and desirability in the inclusive design of technology products

This paper examines the relationship between stigmatic effects of design of technology products for the older and disabled and contextualizes this within wider social themes such as the functional, social, medical and technology models of disability. Inclusive design approaches are identified as unbiased methods for designing for the wider population that may accommodate the needs and desires of people with impairments, therefore reducing ’aesthetic stigma’. Two case studies illustrate stigmatic and nonstigmatic designs

Preventing and responding to depression, self-harm, and suicide in older people living in long term care settings: a systematic review

Abstract Objective: The well documented demographic shift to an aging population means that more people will in future be in need of long term residential care. Previous research has reported an increased risk of mental health issues and suicidal ideation among older people living in residential care settings. However, there is little information on the actual prevalence of depression, self-harm, and suicidal behavior in this population, how it is measured and how care homes respond to these issues. Method: This systematic review of international literature addressed three research questions relating to; the prevalence of mental health problems in this population; how they are identified and; how care homes try to prevent or respond to mental health issues. Results: Findings showed higher reported rates of depression and suicidal behavior in care home residents compared to matched age groups in the community, variation in the use of standardised measures across studies and, interventions almost exclusively focused on increasing staff knowledge about mental health but with an absence of involvement of older people themselves in these programmes. Conclusion: We discuss the implications of these findings in the context of addressing mental health difficulties experienced by older people in residential care and future research in this area

Massive sulfide Zn deposits in the Proterozoic did not require euxinia

Our most important Zn resources occur within clastic-dominated (CD-type) deposits, which are located in a small number of Proterozoic and Phanerozoic sedimentary basins. The most common model for CD-type mineralisation involves sedimentary exhalative (SEDEX) processes, i.e. the venting of metal bearing fluids into a restricted, anoxic H2S-bearing (euxinic) water column. In the Carpentaria Zn Province (Australia), multiple world class deposits are hosted in Proterozoic (1.6 Ga) stratigraphy, where models of the ancient sulfur cycle have also been developed. Focusing on the most recent discovery – the Teena deposit – we report bulk rock and isotopic data (δ34Spyrite values) that provide information on the sulfur cycle during the diagenetic and hydrothermal evolution of the Teena sub-basin. In contrast to the SEDEX model, intervals containing abundant pyrite with highly positive δ34S values (>25 ‰) correspond with euxinic conditions that developed due to high organic loading (i.e. productivity) and not basin restriction. This basin wide feature, which can also be mistaken as a hydrothermal pyrite halo, is genetically unrelated to the subsequent hydrothermal mineralisation that formed beneath the palaeo-seafloor. The formation of CD-type deposits in the Proterozoic does not, therefore, require euxinic conditions

Governing the governors : a case study of college governance in English further education

This paper addresses the nature of governors in the governance of further education colleges in an English context (1). It explores the complex relationship between governors (people/agency), government (policy/structure) and governance (practice), in a college environment. While recent research has focused on the governance of schooling and higher education there has been little attention paid to the role of governors in the lifelong learning sector. The objective of the paper is to contribute to the debate about the purpose of college governance at a time when the Learning and Skills Council (LSC) commissioning era ends, and new government bodies responsible for further education and training, including local authorities, arrive. The paper analyses the nature of FE governance through the perspectives and experiences of governors, as colleges respond to calls from government for greater improvement and accountability in the sector (LSIS, 2009a). What constitutes creative governance is complex and controversial in the wider framework of regulation and public policy reform (Stoker, 1997; Seddon, 2008). As with other tricky concepts such as leadership, professionalism and learning, college governance is best defined in the contexts, cultures and situations in which it is located. College governance does not operate in a vacuum. It involves governors, chairs, principals, professionals, senior managers, clerks, community, business and wider agencies, including external audit and inspection regimes. Governance also acts as a prism through which national education and training reforms are mediated, at local level. While governing bodies are traditionally associated with the business of FE - steering, setting the tone and style, dealing with finance, funding, audit and procedural matters – they are increasingly being challenged to be more creative and responsive to the wider society. Drawing on a recent case study of six colleges, involving governors and key policy stakeholders, this paper explores FE governance in a fast changing policy environment

Performance of transition metal-doped CaCO3 during cyclic CO2 capture-and-release in low-pressure H2O vapour and H2O plasma

The effects of transition metal doping of calcium carbonate on the subsequent performance of the material during CO2 release and recapture have been evaluated for calcination under low-pressure (~0.1 mbar) water vapour and water plasma conditions. The initial samples were prepared by precipitation method from analytical grade carbonate, calcium and transition metal (Fe, Co, Zn, Cu and Ni) containing precursors. The release-recapture properties of the sorbents were monitored over five cycles involving calcination at 1200 K and carbonation at 825 K. The most noteworthy effects were observed for the Zn-doped samples, which exhibited rapid CO2 recapture. Calcination in H2O plasma was tested to evaluate the potential for in-situ material processing as a means to counteract material degradation. The impact of plasma exposure during calcination on the looping performance was mixed and dependent on the specific sample composition. The performance of the Zn-doped CaCO3 was consistently improved by plasma calcination, yielding high uptake and better retention of carrying capacity over the five cycles. All samples exhibited a deterioration in carrying capacity over repeated cycles. The Zn-doped samples also performed best in this respect (least loss of carrying capacity). The beneficial effects of Zn-doping were dependent on the Zn-content of the precursor solutions used for material synthesis.</p