Latitudinal clines of allelic frequencies in Mediterranean populations of Ceratitis capitata (Wiedemann)

International audienc

Real-time synchronization of batch trajectories for on-line multivariate statistical process control using Dynamic Time Warping

This paper addresses the real-time monitoring of batch processes with multiple different local time trajectories of variables measured during the process run. For Unfold Principal Component Analysis (U-PCA)—or Unfold Partial Least Squares (U-PLS)-based on-line monitoring of batch processes, batch runs need to be synchronized, not only to have the same time length, but also such that key events happen at the same time. An adaptation from Kassidas et al.'s approach [1] will be introduced to achieve the on-line synchronization of batch trajectories using the Dynamic Time Warping (DTW) algorithm. In the proposed adaptation, a new boundaries definition is presented for accurate on-line synchronization of an ongoing batch, together with a way to adapt mapping boundaries to batch length. A relaxed greedy strategy is introduced to avoid assessing the optimal path each time a new sample is available. The key advantages of the proposed strategy are its computational speed and accuracy for the batch process context. Data from realistic simulations of a fermentation process of the Saccharomyces cerevisae cultivation are used to illustrate the performance of the proposed strategy.This research work was supported by the Spanish government under the project (DPI2008-06880-C03-03). We also gratefully acknowledge Jose Camacho PhD. for providing simulated data from a fermentation process of Saccharomyces cerevisae. The authors would also like to acknowledge the valuable suggestions made by Prof. Paul Taylor.González Martínez, JM.; Ferrer Riquelme, AJ.; Westerhuis, JA. (2011). Real-time synchronization of batch trajectories for on-line multivariate statistical process control using Dynamic Time Warping. Chemometrics and Intelligent Laboratory Systems. 105(2):195-206. https://doi.org/10.1016/j.chemolab.2011.01.003S195206105

Alkali activation of vitreous calcium aluminosilicate derived from glass fiber waste

The properties and microstructure of alkali-activated (AA) vitreous calcium aluminosilicate (VCAS) are presented in this paper. VCAS is manufactured from a by-product of the glass fiber industry and has been activated using NaOH and KOH solutions. The microstructure and mechanical properties of AA VCAS pastes and mortars are reported. The results show that depending on the type and concentration of hydroxide solution used, mortar samples with compressive strengths up to 77 MPa can be formed after curing for three days at 65 °C. The research demonstrates the potential of VCAS to produce AA cements and the importance of alkali type and concentration in optimizing properties and microstructure.Mitsuuchi Tashima, M.; Soriano Martinez, L.; Borrachero Rosado, MV.; Monzó Balbuena, JM.; Cheeseman, CR.; Paya Bernabeu, JJ. (2012). Alkali activation of vitreous calcium aluminosilicate derived from glass fiber waste. Journal of Sustainable Cement-Based Materials. 1(3):83-93. doi:10.1080/21650373.2012.742610S839313Mahasenan N, Smith S, Humphreys K. The cement industry and global climate change: current and potential future cement industry CO2emissions. Greenhouse Gas Control Technologies – 6th International Conference. Oxford: Pergamon; 2003. p. 995–1000.Schneider, M., Romer, M., Tschudin, M., & Bolio, H. (2011). Sustainable cement production—present and future. Cement and Concrete Research, 41(7), 642-650. doi:10.1016/j.cemconres.2011.03.019WBCSD – World Business Council for Sustainable Development. Cement industry energy and CO2performance – Getting numbers right. Edited by WBCSD, Geneva-Switzerland (ISBN 978-3-940388-48-3). 2009.Shi, C., Jiménez, A. F., & Palomo, A. (2011). New cements for the 21st century: The pursuit of an alternative to Portland cement. Cement and Concrete Research, 41(7), 750-763. doi:10.1016/j.cemconres.2011.03.016Duxson, P., Fernández-Jiménez, A., Provis, J. L., Lukey, G. C., Palomo, A., & van Deventer, J. S. J. (2006). Geopolymer technology: the current state of the art. Journal of Materials Science, 42(9), 2917-2933. doi:10.1007/s10853-006-0637-zFernández-Jiménez, A., Palomo, A., & Criado, M. (2005). Microstructure development of alkali-activated fly ash cement: a descriptive model. Cement and Concrete Research, 35(6), 1204-1209. doi:10.1016/j.cemconres.2004.08.021Hossain, A. B., Shirazi, S. A., Persun, J., & Neithalath, N. (2008). Properties of Concrete Containing Vitreous Calcium Aluminosilicate Pozzolan. Transportation Research Record: Journal of the Transportation Research Board, 2070(1), 32-38. doi:10.3141/2070-05Neithalath, N., Persun, J., & Hossain, A. (2009). Hydration in high-performance cementitious systems containing vitreous calcium aluminosilicate or silica fume. Cement and Concrete Research, 39(6), 473-481. doi:10.1016/j.cemconres.2009.03.006Tashima MM, Soriano L, Borrachero MV, Monzó J, Payá J. Effect of curing time on the microstructure and mechanical strength development of alkali activated nbinders based on vitreous calcium aluminosilicate (VCAS). Bull. Mater. Sci. in press.Hemmings RT, Nelson RD, Graves PL, Cornelius BJ. White pozzolan composition and blended cements containing same. Patent US6776838. 2004.Provis, J. L., Lukey, G. C., & van Deventer, J. S. J. (2005). Do Geopolymers Actually Contain Nanocrystalline Zeolites? A Reexamination of Existing Results. Chemistry of Materials, 17(12), 3075-3085. doi:10.1021/cm050230iCriado, M., Fernández-Jiménez, A., de la Torre, A. G., Aranda, M. A. G., & Palomo, A. (2007). An XRD study of the effect of the SiO2/Na2O ratio on the alkali activation of fly ash. Cement and Concrete Research, 37(5), 671-679. doi:10.1016/j.cemconres.2007.01.013Rees, C. A., Provis, J. L., Lukey, G. C., & van Deventer, J. S. J. (2007). In Situ ATR-FTIR Study of the Early Stages of Fly Ash Geopolymer Gel Formation. Langmuir, 23(17), 9076-9082. doi:10.1021/la701185gLee, W. K. W., & van Deventer, J. S. J. (2003). Use of Infrared Spectroscopy to Study Geopolymerization of Heterogeneous Amorphous Aluminosilicates. Langmuir, 19(21), 8726-8734. doi:10.1021/la026127eGarcía-Lodeiro, I., Fernández-Jiménez, A., Blanco, M. T., & Palomo, A. (2007). FTIR study of the sol–gel synthesis of cementitious gels: C–S–H and N–A–S–H. Journal of Sol-Gel Science and Technology, 45(1), 63-72. doi:10.1007/s10971-007-1643-6Barbosa VFF. Sintese e caracterização de polissialatos (Synthesis and characterization of polysialates) [PhD thesis] (in Portuguese). Instituto Militar de Engenharia. Rio de Janeiro - Brazil. 190 p. 1999.Bernal, S. A., Rodríguez, E. D., Mejía de Gutiérrez, R., Gordillo, M., & Provis, J. L. (2011). Mechanical and thermal characterisation of geopolymers based on silicate-activated metakaolin/slag blends. Journal of Materials Science, 46(16), 5477-5486. doi:10.1007/s10853-011-5490-zBoccaccini, A. R., Bücker, M., Bossert, J., & Marszalek, K. (1997). Glass matrix composites from coal flyash and waste glass. Waste Management, 17(1), 39-45. doi:10.1016/s0956-053x(97)00035-4Kourti, I., Rani, D. A., Deegan, D., Boccaccini, A. R., & Cheeseman, C. R. (2010). Production of geopolymers using glass produced from DC plasma treatment of air pollution control (APC) residues. Journal of Hazardous Materials, 176(1-3), 704-709. doi:10.1016/j.jhazmat.2009.11.089Lampris, C., Lupo, R., & Cheeseman, C. R. (2009). Geopolymerisation of silt generated from construction and demolition waste washing plants. Waste Management, 29(1), 368-373. doi:10.1016/j.wasman.2008.04.007Wu, H.-C., & Sun, P. (2007). New building materials from fly ash-based lightweight inorganic polymer. Construction and Building Materials, 21(1), 211-217. doi:10.1016/j.conbuildmat.2005.06.052Kourti, I., Amutha Rani, D., Boccaccini, A. R., & Cheeseman, C. R. (2011). Geopolymers from DC Plasma–Treated Air Pollution Control Residues, Metakaolin, and Granulated Blast Furnace Slag. Journal of Materials in Civil Engineering, 23(6), 735-740. doi:10.1061/(asce)mt.1943-5533.000017

A Comparative Study of Different Methodologies for Fault Diagnosis in Multivariate Quality Control

Different methodologies for fault diagnosis in multivariate quality control have been proposed in recent years. These methods work in the space of the original measured variables and have performed reasonably well when there is a reduced number of mildly correlated quality and/or process variables with a well-conditioned covariance matrix. These approaches have been introduced by emphasizing their positive or negative virtues, generally on an individual basis, so it is not clear for the practitioner the best method to be used. This paper provides a comprehensive study of the performance of diverse methodological approaches when tested on a large number of distinct simulated scenarios. Our primary aim is to highlight key weaknesses and strengths in these methods as well as clarifying their relationships and the requirements for their implementation in practice.Vidal Puig, S.; Ferrer, A. (2014). A Comparative Study of Different Methodologies for Fault Diagnosis in Multivariate Quality Control. Communications in Statistics - Simulation and Computation. 43(5):986-1005. doi:10.1080/03610918.2012.720745S9861005435Arteaga, F., & Ferrer, A. (2010). How to simulate normal data sets with the desired correlation structure. Chemometrics and Intelligent Laboratory Systems, 101(1), 38-42. doi:10.1016/j.chemolab.2009.12.003Doganaksoy, N., Faltin, F. W., & Tucker, W. T. (1991). Identification of out of control quality characteristics in a multivariate manufacturing environment. Communications in Statistics - Theory and Methods, 20(9), 2775-2790. doi:10.1080/03610929108830667Fuchs, C., & Benjamini, Y. (1994). Multivariate Profile Charts for Statistical Process Control. Technometrics, 36(2), 182-195. doi:10.1080/00401706.1994.10485765Hawkins, D. M. (1991). Multivariate Quality Control Based on Regression-Adiusted Variables. Technometrics, 33(1), 61-75. doi:10.1080/00401706.1991.10484770Editorial Board. (2007). Computational Statistics & Data Analysis, 51(8), iii-v. doi:10.1016/s0167-9473(07)00125-9Hayter, A. J., & Tsui, K.-L. (1994). Identification and Quantification in Multivariate Quality Control Problems. Journal of Quality Technology, 26(3), 197-208. doi:10.1080/00224065.1994.11979526HOCHBERG, Y. (1988). A sharper Bonferroni procedure for multiple tests of significance. Biometrika, 75(4), 800-802. doi:10.1093/biomet/75.4.800HOMMEL, G. (1988). A stagewise rejective multiple test procedure based on a modified Bonferroni test. Biometrika, 75(2), 383-386. doi:10.1093/biomet/75.2.383Kourti, T., & MacGregor, J. F. (1996). Multivariate SPC Methods for Process and Product Monitoring. Journal of Quality Technology, 28(4), 409-428. doi:10.1080/00224065.1996.11979699Li, J., Jin, J., & Shi, J. (2008). Causation-BasedT2Decomposition for Multivariate Process Monitoring and Diagnosis. Journal of Quality Technology, 40(1), 46-58. doi:10.1080/00224065.2008.11917712Mason, R. L., Tracy, N. D., & Young, J. C. (1995). Decomposition ofT2 for Multivariate Control Chart Interpretation. Journal of Quality Technology, 27(2), 99-108. doi:10.1080/00224065.1995.11979573Mason, R. L., Tracy, N. D., & Young, J. C. (1997). A Practical Approach for Interpreting Multivariate T2 Control Chart Signals. Journal of Quality Technology, 29(4), 396-406. doi:10.1080/00224065.1997.11979791Murphy, B. J. (1987). Selecting Out of Control Variables With the T 2 Multivariate Quality Control Procedure. The Statistician, 36(5), 571. doi:10.2307/2348668Rencher, A. C. (1993). The Contribution of Individual Variables to Hotelling’s T 2 , Wilks’ Λ, and R 2. Biometrics, 49(2), 479. doi:10.2307/2532560Roy, J. (1958). Step-Down Procedure in Multivariate Analysis. The Annals of Mathematical Statistics, 29(4), 1177-1187. doi:10.1214/aoms/1177706449Runger, G. C., Alt, F. B., & Montgomery, D. C. (1996). Contributors to a multivariate statistical process control chart signal. Communications in Statistics - Theory and Methods, 25(10), 2203-2213. doi:10.1080/03610929608831832Sankoh, A. J., Huque, M. F., & Dubey, S. D. (1997). Some comments on frequently used multiple endpoint adjustment methods in clinical trials. Statistics in Medicine, 16(22), 2529-2542. doi:10.1002/(sici)1097-0258(19971130)16:223.0.co;2-jTukey, J. W., Ciminera, J. L., & Heyse, J. F. (1985). Testing the Statistical Certainty of a Response to Increasing Doses of a Drug. Biometrics, 41(1), 295. doi:10.2307/253066

Using warping information for batch process monitoring and fault classification

This paper discusses how to use the warping information obtained after batch synchronization for process monitoring and fault classification. The warping information can be used for i) building unsupervised control charts or ii) fault classification when a rich faulty batches database is available. Data from realistic simulations of a fermentation process of the Saccharomyces cerevisiae cultivation are used to illustrate the proposal.This research work was supported by the Spanish government (Ministry of Science and Innovation, MICINN) under project DPI2011-28112-C04-02. We gratefully acknowledge Associate Professor Jose Camacho for providing the simulation scheme of the fermentation process of Saccharomyces cerevisiae cultivation.Gonzalez-Martinez, J.; Westerhuis, J.; Ferrer Riquelme, AJ. (2013). Using warping information for batch process monitoring and fault classification. Chemometrics and Intelligent Laboratory Systems. 127:210-217. https://doi.org/10.1016/j.chemolab.2013.07.003S21021712

An empirical approach towards the efficient and optimal production of influenza-neutralizing ovine polyclonal antibodies demonstrates that the novel adjuvant CoVaccine HT(TM) is functionally superior to Freund's adjuvant

Passive immunotherapies utilising polyclonal antibodies could have a valuable role in preventing and treating infectious diseases such as influenza, particularly in pandemic situations but also in immunocompromised populations such as the elderly, the chronically immunosuppressed, pregnant women, infants and those with chronic diseases. The aim of this study was to optimise current methods used to generate ovine polyclonal antibodies. Polyclonal antibodies to baculovirus-expressed recombinant influenza haemagglutinin from A/Puerto Rico/8/1934 H1N1 (PR8) were elicited in sheep using various immunisation regimens designed to investigate the priming immunisation route, adjuvant formulation, sheep age, and antigen dose, and to empirically ascertain which combination maximised antibody output. The novel adjuvant CoVaccine HT™ was compared to Freund’s adjuvant which is currently the adjuvant of choice for commercial production of ovine polyclonal Fab therapies. CoVaccine HT™ induced significantly higher titres of functional ovine anti-haemagglutinin IgG than Freund’s adjuvant but with fewer side effects, including reduced site reactions. Polyclonal hyperimmune sheep sera effectively neutralised influenza virus in vitro and, when given before or after influenza virus challenge, prevented the death of infected mice. Neither the age of the sheep nor the route of antigen administration appeared to influence antibody titre. Moreover, reducing the administrated dose of haemagglutinin antigen minimally affected antibody titre. Together, these results suggest a cost effective way of producing high and sustained yields of functional ovine polyclonal antibodies specifically for the prevention and treatment of globally significant diseases.Natalie E. Stevens, Cara K. Fraser, Mohammed Alsharifi, Michael P. Brown, Kerrilyn R. Diener, John D. Haybal

Simultaneous clinical resolution of focal segmental glomerulosclerosis associated with chronic lymphocytic leukaemia treated with fludarabine, cyclophosphamide and rituximab

<p>Abstract</p> <p>Background</p> <p>Although renal involvement in advanced haematological malignancies is common, glomerulonephritis associated with lymphoproliferative disorders is rare, and the related pathogenetic mechanisms are still poorly understood. We present a rare case of chronic lymphocytic leukaemia(CLL)-associated focal segmental glomerulosclerosis with nephrotic-range proteinuria.</p> <p>Case presentation</p> <p>A 53-year-old Caucasian man, previously healthy, with no history of hypertension, alcohol use or smoking presented with rapid weight gain, massive peripheral oedema, and hypertension. Laboratory findings included a white blood cell count of 49,800 cells/mm³with an absolute lymphocyte count of 47,000 cells/mm³, serum albumin of 2.3 g/dL, urea 65 mg/dL, and creatinine 1.5 mg/dL. A 24-hour urine collection contained 7.1 g protein and significant haematuria. A peripheral blood smear showed mature lymphocytosis and smudge cells. Diagnostic imaging showed mild paraaortic lymphadenopathy with no renal abnormalities. Bone marrow aspiration and trephine biopsy showed diffuse and focal infiltration with B-CLL lymphocytes. Percutaneous renal biopsy revealed total sclerosis in 3/21(14%) of the glomeruli and focal and segmental solidification and sclerosis in 4/21 (19%) glomeruli. A regimen of fludarabine, cyclophosphamide and rituximab was successful in inducing remission of the CLL and clinical resolution of the nephritic-range proteinuria.</p> <p>Conclusions</p> <p>A multidisciplinary approach to monitor both the malignancy and the glomerular lesions is crucial for the optimal management of paraneoplastic glomerulonephritis. Although chemotherapy with fludarabine, cyclophosphamide and rituximab successfully treated CLL-associated nephrotic syndrome in our patient, further studies are required to confirm efficacy in this setting.</p

Resistance to acid attack, abrasion and leaching behavior of alkali-activated mine waste binders

This paper report results of a research project on the development of alkali-activated binders using mine wastes. Abrasion and acid resistance of two ordinary Portland cement (OPC) strength class concrete mixtures (C20/25 and C30/37) and several mine waste (MW) mixtures were compared. This study indicates that MW binders possess higher acid and abrasion resistance than OPC based concrete mixtures.The leaching assessment of the MW binders shows it can be considered an inert material which indicates that it could be used as a building material