Adiabatic evolution of a coupled-qubit Hamiltonian

We present a general method for studying coupled qubits driven by adiabatically changing external parameters. Extended calculations are provided for a two-bit Hamiltonian whose eigenstates can be used as logical states for a quantum CNOT gate. From a numerical analysis of the stationary Schroedinger equation we find a set of parameters suitable for representing CNOT, while from a time-dependent study the conditions for adiabatic evolution are determined. Specializing to a concrete physical system involving SQUIDs, we determine reasonable parameters for experimental purposes. The dissipation for SQUIDs is discussed by fitting experimental data. The low dissipation obtained supports the idea that adiabatic operations could be performed on a time scale shorter than the decoherence time.Comment: 10 pages, 4 figures, to be pub.in Phys Rev

Engineering transient dynamics of artificial cells by stochastic distribution of enzymes

Here the authors develop a coacervate micromotor that can display autonomous motion as a result of stochastic distribution of propelling units. This stochastic-induced mobility is validated and explained through experiments and theory. Random fluctuations are inherent to all complex molecular systems. Although nature has evolved mechanisms to control stochastic events to achieve the desired biological output, reproducing this in synthetic systems represents a significant challenge. Here we present an artificial platform that enables us to exploit stochasticity to direct motile behavior. We found that enzymes, when confined to the fluidic polymer membrane of a core-shell coacervate, were distributed stochastically in time and space. This resulted in a transient, asymmetric configuration of propulsive units, which imparted motility to such coacervates in presence of substrate. This mechanism was confirmed by stochastic modelling and simulations in silico. Furthermore, we showed that a deeper understanding of the mechanism of stochasticity could be utilized to modulate the motion output. Conceptually, this work represents a leap in design philosophy in the construction of synthetic systems with life-like behaviors

New FOCUS results on charm mixing and CP violation

We present a summary of recent results on CP violation and mixing in the charm quark sector based on a high statistics sample collected by photoproduction experiment FOCUS (E831 at Fermilab). We have measured the difference in lifetimes for the $D^0$ decays: $D^0 \to K^-\pi^+$ and $D^0 \to K^-K^+$. This translates into a measurement of the $y_{CP}$ mixing parameter in the \d0d0 system, under the assumptions that $K^-K^+$ is an equal mixture of CP odd and CP even eigenstates, and CP violation is negligible in the neutral charm meson system. We verified the latter assumption by searching for a CP violating asymmetry in the Cabibbo suppressed decay modes $D^+ \to K^-K^+\pi^+$, $D^0 \to K^-K^+$ and $D^0 \to \pi^-\pi^+$. We show preliminary results on a measurement of the branching ratio $\Gamma(D^{*+}\to \pi^+ (K^+\pi^-))/\Gamma(D^{*+}\to \pi^+ (K^-\pi^+))$.Comment: 9 pages, 6 figures, requires espcrc2.sty. Presented by S.Bianco at CPConf2000, September 2000, Ferrara (Italy). In this revision, fixed several stylistic flaws, add two significant references, fixed a typo in Tab.

Study of the D^0 \to pi^-pi^+pi^-pi^+ decay

Using data from the FOCUS (E831) experiment at Fermilab, we present new measurements for the Cabibbo-suppressed decay mode $D^0 \to \pi^-\pi^+\pi^-\pi^+$. We measure the branching ratio $\Gamma(D^0 \to\pi^+\pi^- \pi^+\pi^-)/\Gamma(D^0 \to K^-\pi^+\pi^-\pi^+) = 0.0914 \pm 0.0018 \pm 0.0022$. An amplitude analysis has been performed, a first for this channel, in order to determine the resonant substructure of this decay mode. The dominant component is the decay $D^0 \to a_1(1260)^+ \pi^-$, accounting for 60% of the decay rate. The second most dominant contribution comes from the decay $D^0 \to \rho(770)^0\rho(770)^0$, with a fraction of 25%. We also study the $a_1(1260)$ line shape and resonant substructure. Using the helicity formalism for the angular distribution of the decay $D^0 \to \rho(770)^0\rho(770)^0$, we measure a longitudinal polarization of $P_L = (71 \pm 4\pm 2)$%.Comment: 38 pages, 8 figures. accepted for publication in Physical Review

Particle interactions in liquid magnetic colloids by zero field cooled measurements: effects on heating efficiency

The influence of magnetic interactions in assemblies formed by either aggregated or disaggregated uniform gamma-Fe_2O_3 particles are investigated as a function of particle size, concentration, and applied field. Hyperthermia and magnetization measurements are performed in the liquid phase of colloids consisting of 8 and 13 nm uniform gamma-Fe_2O_3 particles dispersed in water and hexane. Although hexane allows the disagglomerated obtaining particle system; aggregation is observed in the case of water colloids. The zero field cooled (ZFC) curves show a discontinuity in the magnetization values associated with the melting points of water and hexane. Additionally, for 13 nm gamma-Fe_2O_3 dispersed in hexane, a second magnetization jump is observed that depends on particle concentration and shifts toward lower temperature by increasing applied field. This second jump is related to the strength of the magnetic interactions as it is only present in disagglomerated particle systems with the largest size, i.e., is not observed for 8 nm superparamagnetic particles, and surface effects can be discarded. The specific absorption rate (SAR) decreases with increasing concentration only for the hexane colloid, whereas for aqueous colloids, the SAR is almost independent of particle concentration. Our results suggest that, as a consequence of the magnetic interactions, the dipolar field acting on large particles increases with concentration, leading to a decrease of the SAR

The DEMO magnet system – Status and future challenges

We present the pre-concept design of the European DEMO Magnet System, which has successfully passed the DEMO plant-level gate review in 2020. The main design input parameters originate from the so-called DEMO 2018 baseline, which was produced using the PROCESS systems code. It defines a major and minor radius of 9.1 m and 2.9 m, respectively, an on-axis magnetic field of 5.3 T resulting in a peak field on the toroidal field (TF) conductor of 12.0 T. Four variants, all based on low-temperature superconductors (LTS), have been designed for the 16 TF coils. Two of these concepts were selected to be further pursued during the Concept Design Phase (CDP): the first having many similarities to the ITER TF coil concept and the second being the most innovative one, based on react-and-wind (RW) Nb3Sn technology and winding the coils in layers. Two variants for the five Central Solenoid (CS) modules have been investigated: an LTS-only concept resembling to the ITER CS and a hybrid configuration, in which the innermost layers are made of high-temperature superconductors (HTS), which allows either to increase the magnetic flux or to reduce the outer radius of the CS coil. Issues related to fatigue lifetime which emerged in mechanical analyses will be addressed further in the CDP. Both variants proposed for the six poloidal field coils present a lower level of risk for future development. All magnet and conductor design studies included thermal-hydraulic and mechanical analyses, and were accompanied by experimental tests on both LTS and HTS prototype samples (i.e. DC and AC measurements, stability tests, quench evolution etc.). In addition, magnet structures and auxiliary systems, e.g. cryogenics and feeders, were designed at pre-concept level. Important lessons learnt during this first phase of the project were fed into the planning of the CDP. Key aspects to be addressed concern the demonstration and validation of critical technologies (e.g. industrial manufacturing of RW Nb3Sn and HTS long conductors, insulation of penetrations and joints), as well as the detailed design of the overall Magnet System and mechanical structures

Clinical pregenetic screening for stroke monogenic diseases: Results from lombardia GENS registry

BACKGROUND AND PURPOSE: Lombardia GENS is a multicentre prospective study aimed at diagnosing 5 single-gene disorders associated with stroke (cerebral autosomal dominant arteriopathy with subcortical infarcts and leukoencephalopathy, Fabry disease, MELAS [mitochondrial encephalomyopathy, lactic acidosis, and stroke-like episodes], hereditary cerebral amyloid angiopathy, and Marfan syndrome) by applying diagnostic algorithms specific for each clinically suspected disease METHODS: We enrolled a consecutive series of patients with ischemic or hemorrhagic stroke or transient ischemic attack admitted in stroke units in the Lombardia region participating in the project. Patients were defined as probable when presenting with stroke or transient ischemic attack of unknown etiopathogenic causes, or in the presence of <3 conventional vascular risk factors or young age at onset, or positive familial history or of specific clinical features. Patients fulfilling diagnostic algorithms specific for each monogenic disease (suspected) were referred for genetic analysis. RESULTS: In 209 patients (57.4\ub114.7 years), the application of the disease-specific algorithm identified 227 patients with possible monogenic disease. Genetic testing identified pathogenic mutations in 7% of these cases. Familial history of stroke was the only significant specific feature that distinguished mutated patients from nonmutated ones. The presence of cerebrovascular risk factors did not exclude a genetic disease. CONCLUSIONS: In patients prescreened using a clinical algorithm for monogenic disorders, we identified monogenic causes of events in 7% of patients in comparison to the 1% to 5% prevalence reported in previous series