Spin Seebeck effect in Y-type hexagonal ferrite thin films

Spin Seebeck effect (SSE) has been investigated in thin films of two Y-hexagonal ferrites Ba$_2$Zn$_{2}$Fe$_{12}$O$_{22}$ (Zn2Y) and Ba$_2$Co$_{2}$Fe$_{12}$O$_{22}$ (Co2Y) deposited by a spin-coating method on SrTiO$_3$(111) substrate. The selected hexagonal ferrites are both ferrimagnetic with similar magnetic moments at room temperature and both exhibit easy magnetization plane normal to $c$-axis. Despite that, SSE signal was only observed for Zn2Y, whereas no significant SSE signal was detected for Co2Y. We tentatively explain this different behavior by a presence of two different magnetic ions in Co2Y, whose random distribution over octahedral sites interferes the long range ordering and enhances the Gilbert damping constant. The temperature dependence of SSE for Zn2Y was measured and analyzed with regard to the heat flux and temperature gradient relevant to the SSE signal.Comment: 7 pages, 9 figure

Transforming U.S. Energy Innovation

The United States and the world need a revolution in energy technology—a revolution that would improve the performance of our energy systems to face the challenges ahead. A dramatic increase in the pace of energy innovation is crucial to meet the challenges of: • Energy and national security, to address the dangers of undue reliance on dwindling supplies of oil increasingly concentrated in some of the most volatile regions of the world, and to limit the connection between nuclear energy and the spread of nuclear weapons; • Environmental sustainability, to reduce the wide range of environmental damages due to energy production and use, from fine particulate emissions at coal plants, to oil spills, to global climate disruption; and • Economic competitiveness, to seize a significant share of the multi-trillion-dollar clean energy technology market and improve the balance of payments by increasing exports, while reducing the hundreds of billions of dollars spent every year on importing oil. In an intensely competitive and interdependent global landscape, and in the face of large climate risks from ongoing U.S. reliance on a fossil-fuel based energy system, it is important to maintain and expand long-term investments in the energy future of the U.S. even at a time of budget stringency. It is equally necessary to think about how to improve the efficiency of those investments, through strengthening U.S. energy innovation institutions, providing expanded incentives for private-sector innovation, and seizing opportunities where international cooperation can accelerate innovation. The private sector role is key: in the United States the vast majority of the energy system is owned by private enterprises, whose innovation and technology deployment decisions drive much of the country’s overall energy systems. Efficiently utilizing government investments in energy innovation requires understanding the market incentives that drive private firms to invest in advanced energy technologies, including policy stability and predictability. The U.S. government has already launched new efforts to accelerate energy innovation. In particular, the U.S. Department of Energy is undertaking a Quadrennial Technology Review to identify the most promising opportunities and provide increased coherence and stability. Our report offers analysis and recommendations designed to accelerate the pace at which better energy technologies are discovered, developed, and deployed, and is focused in four key areas: • Designing an expanded portfolio of federal investments in energy research, development, demonstration (ERD&D), and complementary policies to catalyze the deployment of novel energy technologies; • Increasing incentives for private-sector innovation and strengthening federal-private energy innovation partnerships; • Improving the management of energy innovation institutions to maximize the results of federal investments; and • Expanding and coordinating international energy innovation cooperation to bring ideas and resources together across the globe to address these global challenges

Ionization Electron Signal Processing in Single Phase LArTPCs II. Data/Simulation Comparison and Performance in MicroBooNE

The single-phase liquid argon time projection chamber (LArTPC) provides a large amount of detailed information in the form of fine-grained drifted ionization charge from particle traces. To fully utilize this information, the deposited charge must be accurately extracted from the raw digitized waveforms via a robust signal processing chain. Enabled by the ultra-low noise levels associated with cryogenic electronics in the MicroBooNE detector, the precise extraction of ionization charge from the induction wire planes in a single-phase LArTPC is qualitatively demonstrated on MicroBooNE data with event display images, and quantitatively demonstrated via waveform-level and track-level metrics. Improved performance of induction plane calorimetry is demonstrated through the agreement of extracted ionization charge measurements across different wire planes for various event topologies. In addition to the comprehensive waveform-level comparison of data and simulation, a calibration of the cryogenic electronics response is presented and solutions to various MicroBooNE-specific TPC issues are discussed. This work presents an important improvement in LArTPC signal processing, the foundation of reconstruction and therefore physics analyses in MicroBooNE.Comment: 54 pages, 36 figures; the first part of this work can be found at arXiv:1802.0870

Determination of muon momentum in the MicroBooNE LArTPC using an improved model of multiple Coulomb scattering

We discuss a technique for measuring a charged particle's momentum by means of multiple Coulomb scattering (MCS) in the MicroBooNE liquid argon time projection chamber (LArTPC). This method does not require the full particle ionization track to be contained inside of the detector volume as other track momentum reconstruction methods do (range-based momentum reconstruction and calorimetric momentum reconstruction). We motivate use of this technique, describe a tuning of the underlying phenomenological formula, quantify its performance on fully contained beam-neutrino-induced muon tracks both in simulation and in data, and quantify its performance on exiting muon tracks in simulation. Using simulation, we have shown that the standard Highland formula should be re-tuned specifically for scattering in liquid argon, which significantly improves the bias and resolution of the momentum measurement. With the tuned formula, we find agreement between data and simulation for contained tracks, with a small bias in the momentum reconstruction and with resolutions that vary as a function of track length, improving from about 10% for the shortest (one meter long) tracks to 5% for longer (several meter) tracks. For simulated exiting muons with at least one meter of track contained, we find a similarly small bias, and a resolution which is less than 15% for muons with momentum below 2 GeV/c. Above 2 GeV/c, results are given as a first estimate of the MCS momentum measurement capabilities of MicroBooNE for high momentum exiting tracks

Noise Characterization and Filtering in the MicroBooNE Liquid Argon TPC

The low-noise operation of readout electronics in a liquid argon time projection chamber (LArTPC) is critical to properly extract the distribution of ionization charge deposited on the wire planes of the TPC, especially for the induction planes. This paper describes the characteristics and mitigation of the observed noise in the MicroBooNE detector. The MicroBooNE's single-phase LArTPC comprises two induction planes and one collection sense wire plane with a total of 8256 wires. Current induced on each TPC wire is amplified and shaped by custom low-power, low-noise ASICs immersed in the liquid argon. The digitization of the signal waveform occurs outside the cryostat. Using data from the first year of MicroBooNE operations, several excess noise sources in the TPC were identified and mitigated. The residual equivalent noise charge (ENC) after noise filtering varies with wire length and is found to be below 400 electrons for the longest wires (4.7 m). The response is consistent with the cold electronics design expectations and is found to be stable with time and uniform over the functioning channels. This noise level is significantly lower than previous experiments utilizing warm front-end electronics.Comment: 36 pages, 20 figure

KRILLBASE: a circumpolar database of Antarctic krill and salp numerical densities, 1926–2016

Antarctic krill (Euphausia superba) and salps are major macroplankton contributors to Southern Ocean food webs and krill are also fished commercially. Managing this fishery sustainably, against a backdrop of rapid regional climate change, requires information on distribution and time trends. Many data on the abundance of both taxa have been obtained from net sampling surveys since 1926, but much of this is stored in national archives, sometimes only in notebooks. In order to make these important data accessible we have collated available abundance data (numerical density, no.

Towards sustainability in water-energy nexus: Ocean energy for seawater desalination

Seawater desalination is an important option for addressing the world's water supply challenges. Current desalination plants use enormous quantities of energy and cause a number of environmental issues. Renewable energy options, mostly solar and geothermal systems, have been examined in detail to supply the energy needed for water desalination. The co-location benefit of energy derived from the ocean to power seawater desalination processes is appealing. However, the promise and potential of ocean-based power generation for desalination systems has not been investigated in detail. The development of such systems has been limited due to technological and economic limitations of energy harvesting and transport as well as device maintenance under water. In this paper, we review the state of the art of ocean energy in desalination. It explores different sources of energy from the ocean that include electricity generation, as well as mechanical force and thermal energy and salinity gradients that can also be directly harnessed for powering the desalination processes. We also examine recent advances in scaling up for commercial deployment, and discuss relevant cost, environmental and social concerns. The great potential of ocean energy for seawater desalination in terms of diverse energy forms, flexible integration methods and various deployment strategies can provide important environmental, water and social benefits for seawater desalination, thus promote sustainability in water-energy nexus. The use of ocean energy in desalination applications could benefit the future development of ocean energy technology in renewable energy sector

Effective Phone Calls

“Effective Phone Calls” is a practical and accessible course specifically designed to develop students` essential communication and language skills. It is divided into six units, which contain face-to-face with teacher and self-study materials. The course aims to develop both competence and confi-dence in a variety of situations, so that by the end of the period of study students will have acquired the necessary skills to handle almost any kind of call in business setting

Materials and Textile Architecture Analyses for Mechanical Counter-Pressure Space Suits using Active Materials

Mechanical counter-pressure (MCP) space suits have the potential to improve the mobility of astronauts as they conduct planetary exploration activities. MCP suits differ from traditional gas-pressurized space suits by applying surface pressure to the wearer using tight-fitting materials rather than pressurized gas, and represent a fundamental change in space suit design. However, the underlying technologies required to provide uniform compression in a MCP garment at sufficient pressures for space exploration have not yet been perfected, and donning and doffing a MCP suit remains a significant challenge. This research effort focuses on the novel use of active material technologies to produce a garment with controllable compression capabilities (up to 30 kPa) to address these problems. We provide a comparative study of active materials and textile architectures for MCP applications; concept active material compression textiles to be developed and tested based on these analyses; and preliminary biaxial braid compression garment modeling results.United States. National Aeronautics and Space Administration (OCT Space Technology Research Fellowship Grant NNX11AM62H)MIT-Portugal Progra