Modelling the response of single passive piles subjected to lateral soil movement using PLAXIS

Response of single pile subjected to lateral displacements of soil mass using 3D finite element software (PLAXIS) is studied. Embedded pile feature in which the pile composed of beam elements with special interface elements to represent pile-soil interaction is used. The Mohr–Coulomb elastic–plastic constitutive model was employed for the soil stress-strain behaviour. A good agreement between laboratory and predicted results is observed in the validation analysis. A parametric study was conducted to investigate the influence of soil Young's modulus and soil movement profile on the response of single "passive pile". The software results revealed that the distribution of bending moment along the pile length vary considerably and was in a very good agreement with the real pile behaviour when adopting a variation of soil elastic modulus with depth instead of choosing a constant value

Complicated Coeliac Disease : Diagnosis and Management

Dit proefschrift geeft een gedetailleerd overzicht van het management van gecompliceerde vormen van coeliakie, met name refractaire coeliakie, met de huidige onderverdeling in twee categorieën (RCD type I en II), en enteropathie geassocieerd T-cel lymfoom (EATL).Mulder, C.J.J. [Promotor

Open and / or laparoscopic surgical treatment of liver hydatic cysts

Hydatid disease is a severe parasitic disease with a widely ranging distribution. In the human being the liver is the most frequent organ affected. 1 The treatment should be individualized to the morphology, size, number and location of the cysts, that is why a variety of surgical operations have been advocated from complete resection like total pericystectomy or partial hepatectomy to laparoscopy to a minimally invasive procedures like percutaneous aspiration of cysts to conservative drug therapy. 3-4 This study compares laparoscopic versus open management of the hydatid cyst of liver the surgical approach to liver echinococcosis is still a controversial issue and shows our results of surgical treatment of liver hydatid cysts during a 3-years period

Sliding wear investigation of suspension sprayed WC-Co nanocomposite coatings.

Sliding wear evaluation of nanostructured coatings deposited by Suspension High Velocity Oxy-Fuel (S-HVOF) and conventional HVOF (Jet Kote (HVOF-JK) and JP5000 (HVOF-JP)) spraying were evaluated. S-HVOF coatings were nanostructured and deposited via an aqueous based suspension of the WC-Co powder, using modified HVOF (TopGun) spraying. Microstructural evaluations of these hardmetal coatings included X-ray Diffraction (XRD) and Scanning Electron Microscopy (SEM) equipped with Energy Dispersive X-ray Spectroscopy (EDX). Sliding wear tests on coatings were conducted using a ball-on-flat test rig against steel, silicon nitride (Si3N4) ceramic and WC-6Co balls. Results indicated that nanosized particles inherited from the starting powder in S-HVOF spraying were retained in the resulting coatings. Significant changes in the chemical and phase composition were observed in the S-HVOF coatings. Despite decarburization, the hardness and sliding wear resistance of the S-HVOF coatings was comparable to the HVOF-JK and HVOF-JP coatings. The sliding wear performance was dependent on the ball-coating test couple. In general a higher ball wear rate was observed with lower coating wear rate. Comparison of the total (ball and coating) wear rate indicated that for steel and ceramic balls, HVOF-JP coatings performed the best followed by the S-HVOF and HVOF-JK coatings. For the WC-Co ball tests, average performance of S-HVOF was better than that of HVOF-JK and HVOF-JP coatings. Changes in sliding wear behavior were attributed to the support of metal matrix due to relatively higher tungsten content, and uniform distribution of nanoparticles in the S-HVOF coating microstructure. The presence of tribofilm was also observed for all test couples

Extremely large extinction efficiency and field enhancement in terahertz resonant dipole nanoantennas

The distinctive ability of nanometallic structures to manipulate light at the nanoscale has recently promoted their use for a spectacular set of applications in a wide range of areas of research including artificial optical materials, nano-imaging, biosensing, and nonlinear optics. Here we transfer this concept to the terahertz spectral region, demonstrating a metal nanostructure in shape of a dipole nanoantenna, which can efficiently resonate at terahertz frequencies, showing an effective cross section >100 times larger than its geometrical area, and a field enhancement factor of ~280, confined on a lateral section of ~λ/1,000. These results lead to immediate applications in terahertz artificial materials exhibiting giant dichroism, suggest the use of dipole nanoantennas in nanostructure-based terahertz metamaterials, and pave the way for nanoantenna-enhanced terahertz few-molecule spectroscopy and localized terahertz nonlinear optics

Study of the Relation between the Spiral Arm Pitch Angle and the Kinetic Energy of Random Motions of the Host Spiral Galaxies, A

In this work, we report a relation between the kinetic energy of random motions of the corresponding host galaxies and spiral arm pitch angles (Mdynσ2- P), (M*σ2- P) where Mdyn is the bulge dynamical mass, M* is bulge stellar mass, and σ is the velocity dispersion of the host galaxy bulge. We measured the spiral arm pitch angle (P) for a sample of Spitzer/IRAC 3.6-μm images of 54 spiral galaxies, estimated by using a 2D Fast Fourier Transform decomposition technique (2DFFT). We selected a sample of nearly face-on spiral galaxies and used IRAF ellipse to determine the ellipticity and major-axis position angle in order to deproject the images to face-on, and using a 2D Fast Fourier Transform decomposition technique, we determined the spiral arm pitch angles. We estimated the kinetic energy of random motions of the corresponding host galaxies (Mdynσ, M*σ2) by using Mdyn, M*, and σ, where the stellar velocity dispersion (σ) of the bulge was taken from the literature. We determined the bulge dynamical mass (Mdyn) using the virial theorem, and the bulge stellar mass (M*) was estimated by using the bulge 3.6-μm luminosity with the appropriate stellar mass-to-light ratio (M/L)

Design of Cationic Multi-Walled Carbon Nanotubes as Efficient siRNA Vectors for Lung Cancer Xenograft Eradication

Polo-Like Kinase (PLK1) has been identified as a potential target in cancer gene therapy via chemical or genetic inhibitory approaches. The biomedical applications of chemically functionalized carbon nanotubes (f-CNTs) in cancer therapy have been studied due to their ability to efficiently deliver siRNA intracellularly. In this study, we established the capacity of cationic MWNT-NH3+ to deliver the apoptotic siRNA against PLK1 (siPLK1) in Calu6 tumor xenografts by direct intratumoural injections. A direct comparison with cationic liposomes was made. This study validates the PLK1 gene as a potential target in cancer gene therapy including lung cancer, as demonstrated by the therapeutic efficacy of siPLK1:MWNT-NH3+ complexes and their ability to significantly improve animal survival. Biological analysis of the siPLK1:MWNT-NH3+ treated tumors by RT-PCR and Western blot, in addition to TUNEL staining confirmed the biological functionality of the siRNA intratumourally, suggesting that tumor eradication was due to PLK1 knockdown. Furthermore, by using a fluorescently labelled, non-coding siRNA sequence complexed with MWNT-NH3+, we established for the first time that the improved therapeutic efficacy observed in f-CNT-based siRNA delivery is directly proportional to the enhanced siRNA retention in the solid tumor and subsequent uptake by tumor cells after local administration in vivo

Comparative study of corrosion performance of HVOF-sprayed coatings produced using conventional and suspension WC-Co feedstock.

Corrosion properties of nanostructured coatings deposited by suspension high-velocity oxy-fuel (S-HVOF) via an aqueous suspension of milled WC-Co powder were compared with conventional HVOF-sprayed coatings. Microstructural evaluations of these coatings included x-ray diffraction and scanning electron microscopy equipped with an energy-dispersive x-ray spectroscopy. The corrosion performance of AISI440C stainless steel substrate and the coatings was evaluated in a 3.5 wt.% NaCl aqueous solution at ~25 °C. The electrochemical properties of the samples were assessed experimentally, employing potentiodynamic polarization and electrochemical impedance spectroscopy. The potentiodynamic polarization results indicated that coatings produced by S-HVOF technique show lower corrosion resistance compared with the coatings produced by HVOF-JK (HVOF Jet Kote) and HVOF-JP (HVOF JP5000) techniques. Results are discussed in terms of corrosion mechanism, Bode and Nyquist plots, as well as equivalent circuit models of the coating–substrate system