Testing hadronic-model predictions of depth of maximum of air-shower profiles and ground-particle signals using hybrid data of the Pierre Auger Observatory

We test the predictions of hadronic interaction models regarding the depth of maximum of air-shower profiles, Xmax , and ground-particle signals in water-Cherenkov detectors at 1000 m from the shower core, Sð1000Þ, using the data from the fluorescence and surface detectors of the Pierre Auger Observatory. The test consists of fitting the measured two-dimensional (Sð1000Þ, Xmax ) distributions using templates for simulated air showers produced with hadronic interaction models E pos-LHC , QGSJ et-II -04, SIBYLL 2.3d and leaving the scales of predicted Xmax and the signals from hadronic component at ground as free-fit parameters. The method relies on the assumption that the mass composition remains the same at all zenith angles, while the longitudinal shower development and attenuation of ground signal depend on the mass composition in a correlated way. The analysis was applied to 2239 events detected by both the fluorescence and surface detectors of the Pierre Auger Observatory with energies between 10 18.5 eV to 10 19.0 eV and zenith angles below 60°. We found, that within the assumptions of the method, the best description of the data is achieved if the predictions of the hadronic interaction models are shifted to deeper Xmax values and larger hadronic signals at all zenith angles. Given the magnitude of the shifts and the data sample size, the statistical significance of the improvement of data description using the modifications considered in the paper is larger than 5σ even for any linear combination of experimental systematic uncertainties

Measurement of the ratio B(t -> Wb)/B(t -> Wq) in pp collisions at root s=8 TeV

The ratio of the top-quark branching fractions R = B(t --> Wb)/B(t --> Wq), where the denominator includes the sum over all down-type quarks (q = b, s, d), is measured in the t (t) over bar dilepton final state with proton-proton collision data at root s = 8 TeV from an integrated luminosity of 19.7 fb(-1), collected with the CMS detector. In order to quantify the purity of the signal sample, the cross section is measured by fitting the observed jet multiplicity, thereby constraining the signal and background contributions. By counting the number of b jets per event, an unconstrained value of R = 1.014 +/- 0.003 (stat.) +/- 0.032 (syst.) is measured, in a good agreement with current precision measurements in electroweak and flavour sectors. A lower limit R > 0.955 at the 95% confidence level is obtained after requiring R 0.975 is set at 95% confidence level. The result is combined with a previous CMS measurement of the t-channel single-top-quark cross section to determine the top-quark total decay width, Gamma(t) = 1.36 +/- 0.02 (stat.)(-0.11)(+0.14) (syst.) GeV

Description and performance of track and primary-vertex reconstruction with the CMS tracker

A description is provided of the software algorithms developed for the CMS tracker both for reconstructing charged-particle trajectories in proton-proton interactions and for using the resulting tracks to estimate the positions of the LHC luminous region and individual primary-interaction vertices. Despite the very hostile environment at the LHC, the performance obtained with these algorithms is found to be excellent. For t (t) over bar events under typical 2011 pileup conditions, the average track-reconstruction efficiency for promptly-produced charged particles with transverse momenta of p(T) > 0.9GeV is 94% for pseudorapidities of vertical bar eta vertical bar < 0.9 and 85% for 0.9 < vertical bar eta vertical bar < 2.5. The inefficiency is caused mainly by hadrons that undergo nuclear interactions in the tracker material. For isolated muons, the corresponding efficiencies are essentially 100%. For isolated muons of p(T) = 100GeV emitted at vertical bar eta vertical bar < 1.4, the resolutions are approximately 2.8% in p(T), and respectively, 10 m m and 30 mu m in the transverse and longitudinal impact parameters. The position resolution achieved for reconstructed primary vertices that correspond to interesting pp collisions is 10-12 mu m in each of the three spatial dimensions. The tracking and vertexing software is fast and flexible, and easily adaptable to other functions, such as fast tracking for the trigger, or dedicated tracking for electrons that takes into account bremsstrahlung

Measurement of the production cross section for a W boson and two b jets in pp collisions at root s=7 TeV

The production cross section for a Wboson and two b jets is measured using proton-proton collisions at v root s = 7 TeV in a data sample collected with the CMS experiment at the LHC corresponding to an integrated luminosity of 5.0 fb(-1). The W + bbevents are selected in the W..decay mode by requiring a muon with transverse momentum pT> 25GeVand pseudorapidity |eta| 25GeVand |eta| < 2.4. The measured W + bbproduction cross section in the fiducial region, calculated at the level of final-state particles, is s(pp. W + bb) xB(W..) = 0.53 +/- 0.05 (stat.) +/- 0.09 (syst.) +/- 0.06 (theo.) 0.01 (lum.) pb, in agreement with the standard model prediction. In addition, kinematic distributions of the W + bbsystem are in agreement with the predictions of a simulation usingMadGraphandpythia

Search for excited quarks in the gamma plus jet final state in proton-proton collisions at root s=8 TeV

A search for excited quarks decaying into the gamma + jet final state is presented. The analysis is based on data corresponding to an integrated luminosity of 19.7 fb(-1) collected by the CMS experiment in proton-proton collisions at root s = 8 TeV at the LHC. Events with photons and jets with high transverse momenta are selected and the gamma + jet invariant mass distribution is studied to search for a resonance peak. The 95% confidence level upper limits on the product of cross section and branching fraction are evaluated as a function of the excited quark mass. Limits on excited quarks are presented as a function of their mass and coupling strength; masses below 3.5 TeV are excluded at 95% confidence level for unit couplings to their standard model partners

Alignment of the CMS tracker with LHC and cosmic ray data

The central component of the CMS detector is the largest silicon tracker ever built. The precise alignment of this complex device is a formidable challenge, and only achievable with a significant extension of the technologies routinely used for tracking detectors in the past. This article describes the full-scale alignment procedure as it is used during LHC operations. Among the specific features of the method are the simultaneous determination of up to 200 000 alignment parameters with tracks, the measurement of individual sensor curvature parameters, the control of systematic misalignment effects, and the implementation of the whole procedure in a multiprocessor environment for high execution speed. Overall, the achieved statistical accuracy on the module alignment is found to be significantly better than 10 mu m

Koulutusluokitus : Koulutuskoodimuutokset vuonna 1989, Liite 3

A measurement of inclusive ZZ production cross section and constraints on anomalous triple gauge couplings in proton-proton collisions at $\sqrt{s}$ = 8 TeV are presented. A data sample, corresponding to an integrated luminosity of 19.6 inverse-femtobarns was collected with the CMS experiment at the LHC. The measurements are performed in the leptonic decay modes $ZZ \to lll'l'$, where $l = e, \mu$ and $l' = e, \mu, \tau$. The measured total cross section, $\sigma (pp \to ZZ) = 7.7 \pm 0.5 (stat.)^{+0.5}_{-0.4} (syst.) \pm 0.4 (theo.) \pm 0.2 (lum.) pb$ for both Z bosons produced in the mass range $m_Z$ within 60 and 120 GeV, is consistent with standard model predictions. Differential cross sections are measured and well described by the theoretical predictions. The invariant mass distribution of the four-lepton system is used to set limits on anomalous ZZZ and ZZ$\gamma$ couplings at the 95% confidence level: $f_4^Z$ in (-0.004,+0.004), $f_5^Z$ in (-0.005,+0.005), $f_4^\gamma$ in (-0.004,+0.004), and $f_5^\gamma$ in (-0.005,+0.005)

Constraints on the Higgs boson width from off-shell production and decay to Z-boson pairs

Constraints are presented on the total width of the recently discovered Higgs boson, Gamma(H), using its relative on-shell and off-shell production and decay rates to a pair of Z bosons, where one Z boson decays to an electron or muon pair, and the other to an electron, muon, or neutrino pair. The analysis is based on the data collected by the CMS experiment at the LHC in 2011 and 2012, corresponding to integrated luminosities of 5.1 fb(-1) at a center-of-mass energy root s = 7 TeV and 19.7 fb(-1) at root s = 8 TeV. A simultaneous maximum likelihood fit to the measured kinematic distributions near the resonance peak and above the Z-boson pair production threshold leads to an upper limit on the Higgs boson width of Gamma(H) < 22 MeV at a 95% confidence level, which is 5.4 times the expected value in the standard model at the measured mass of m(H) = 125.6 GeV

Performance of the CMS missing transverse momentum reconstruction in pp data at √s= 8 TeV

The performance of missing transverse energy reconstruction algorithms is presented using root s = 8 TeV proton-proton (pp) data collected with the CMS detector. Events with anomalous missing transverse energy are studied, and the performance of algorithms used to identify and remove these events is presented. The scale and resolution for missing transverse energy, including the effects of multiple pp interactions (pileup), are measured using events with an identified Z boson or isolated photon, and are found to be well described by the simulation. Novel missing transverse energy reconstruction algorithms developed specifically to mitigate the effects of large numbers of pileup interactions on the missing transverse energy resolution are presented. These algorithms significantly reduce the dependence of the missing transverse energy resolution on pileup interactions. Finally, an algorithm that provides an estimate of the significance of the missing transverse energy is presented, which is used to estimate the compatibility of the reconstructed missing transverse energy with a zero nominal value

Search for a standard model-like Higgs boson in the mu(+)mu(-) and e(+)e(-) decay channels at the LHC

A search is presented for a standard model-like Higgs boson decaying to the mu(+)mu(-) or e(+)e(-) final states based on proton-proton collisions recorded by the CMS experiment at the CERN LHC. The data correspond to integrated luminosities of 5.0 fb(-1) at a centre-of-mass energy of 7 TeV and 19.7 fb(-1) at 8 TeV for the mu(+)mu(-) search, and of 19.7 fb(-1) at 8 TeV for the e(+)e(-) search. Upper limits on the production cross section times branching fraction at the 95% confidence level are reported for Higgs boson masses in the range from 120 to 150 GeV. For a Higgs boson with a mass of 125 GeV decaying to mu(+)mu(-), the observed (expected) upper limit on the production rate is found to be 7.4 (6.5(-1.9)(+2.8)) times the standard model value. This corresponds to an upper limit on the branching fraction of 0.0016. Similarly, for e(+)e(-), an upper limit of 0.0019 is placed on the branching fraction, which is approximate to 3.7 x 10(5) times the standard model value. These results, together with recent evidence of the 125 GeV boson coupling to tau-leptons with a larger branching fraction consistent with the standard model, confirm that the leptonic couplings of the new boson are not flavour-universal