Improved Machine Tool Linear Axis Calibration Through Continuous Motion Data Capture

Machine tool calibration is becoming recognised as an important part of the manufacturing process. The current international standards for machine tool linear axes calibration support the use of quasi-static calibration techniques. These techniques can be time consuming but more importantly a compromise in quality due to the practical restriction on the spatial resolution of target positions on the axis under test. Continuous motion calibration techniques have the potential to dramatically increase calibration quality. Through taking several measurement values per second while the axis under test is in motion, it is possible to measure in far greater detail. Furthermore, since machine tools normally operate in dynamic mode, the calibration data can be more representative if it is captured while the machine is in motion. The drawback to measuring the axis while in motion is the potential increase in measurement uncertainty. In the following paper, different methods of continuous motion calibration are discussed. A time-based continuous motion solution is proposed as well as a novel optimisation and correlation algorithm to accurately fuse the data taken from quasi-static and continuous motion measurements. The measurement method allows for minimal quasi-static measurements to be taken while using a continuous motion measurement to enhance the calibration process with virtually no additional time constraints. The proposed method does not require any additional machine interfacing, making it a more readily accessible solution for widespread machine tool use than other techniques which require hardware links to the CNC. The result of which means a shorter calibration routine and enhanced results. The quasi-static and continuous motion measurements showed correlation to within one micrometre at the quasi-static measurement targets. An error of 13 μm was detailed on the continuous motion, but was missed using the standard test. On a larger, less accurate machine, the quasi-static and continuous motion measurements were on average within 3 μm of each other however, showed a standard deviation of 4 μm which is less than 1% of the overall error. Finally, a high frequency cyclic error was detected in the continuous motion measurement but was missed in the quasi-static measuremen

Large-area inventory of species composition using airborne laser scanning and hyperspectral data

5openInternationalInternational coauthor/editorTree species composition is an essential attribute in stand-level forest management inventories and remotely sensed data might be useful for its estimation. Previous studies on this topic have had several operational drawbacks, e.g., performance studied at a small scale and at a single tree-level with large fieldwork costs. The current study presents the results from a large-area inventory providing species composition following an operational area-based approach. The study utilizes a combination of airborne laser scanning and hyperspectral data and 97 field sample plots of 250 m2 collected over 350 km2 of productive forest in Norway. The results show that, with the availability of hyperspectral data, species-specific volume proportions can be provided in operational forest management inventories with acceptable results in 90% of the cases at the plot level. Dominant species were classified with an overall accuracy of 91% and a kappa-value of 0.73. Species-specific volumes were estimated with relative root mean square differences of 34%, 87%, and 102% for Norway spruce (Picea abies (L.) Karst.), Scots pine (Pinus sylvestris L.), and deciduous species, respectively. A novel tree-based approach for selecting pixels improved the results compared to a traditional approach based on the normalized difference vegetation index.openØrka, Hans Ole; Hansen, Endre Hofstad; Dalponte, Michele; Gobakken, Terje; Næsset, ErikØrka, H.O.; Hansen, E.H.; Dalponte, M.; Gobakken, T.; Næsset, E

Specific Heat of Quantum Elastic Systems Pinned by Disorder

We present the detailed study of the thermodynamics of vibrational modes in disordered elastic systems such as the Bragg glass phase of lattices pinned by quenched impurities. Our study and our results are valid within the (mean field) replica Gaussian variational method. We obtain an expression for the internal energy in the quantum regime as a function of the saddle point solution, which is then expanded in powers of $\hbar$ at low temperature $T$. In the calculation of the specific heat $C_v$ a non trivial cancellation of the term linear in $T$ occurs, explicitly checked to second order in $\hbar$. The final result is $C_v \propto T^3$ at low temperatures in dimension three and two. The prefactor is controlled by the pinning length. This result is discussed in connection with other analytical or numerical studies.Comment: 14 page

Claim of the State of Georgia.

46-3Indian AffairsReport : Claim of of Georgia. [1982] For military operations against Indians during 1795-1818.1881-4

Western Cherokees

45-2Indian AffairsReport on the Western Cherokees. [1822] Claims of the "Old Settlers" against the U.S.; history of the tribe's relations with the government.1878-3

Appropriations, new offices, etc. statements showing, I. Appropriations made during the second session of the Forty-second Congress. II. Offices created and the salaries thereof. III. The offices the salaries of which have been increased, with the amount of such increase, during the same period.

42-2Statements of Appropriations. [1527] During the 2d session, 42d Congress; Indian expenses.1872-13

Mineral resources of the United States.

51-1Mineral Resources of the U.S. [2775] Coal, coke, and mineral springs in Indian Territory .1890-14

Development of a Novel Framework for the Assessment and Improvement of Climate Adaptation and Mitigation Actions in Europe

The greenhouse gases (GHG) emissions in the European Union (EU) are mainly caused by human activity from five sectors—power, industry, transport, buildings, and agriculture. To tackle all these challenges, the EU actions and policies have been encouraging initiatives focusing on a holistic approach but these initiatives are not enough coordinated and connected to reach the much needed impact. To strengthen the important role of regions in climate actions, and stimulate wide stakeholders’ engagement including citizens, a conceptual framework for enabling rapid and far-reaching climate actions through multi-sectoral regional adaptation pathways is hereby developed. The target audience for this framework is composed by regional policy makers, developers and fellow scientists. The scale of the framework emphasizes the regional function as an important meeting point and delivery arena for European and national climate strategies and objectives both at urban and rural level. The framework is based on transformative and no-regret measures, prioritizing the Key Community Systems (KCS) that most urgently need to be protected from climate impacts and risks.publishedVersio

Aristarchi de magnitudinibus, et distantiis Solis, et Lunae, liber

Copia digital. Madrid : Ministerio de Cultura. Subdirección General de Coordinación Bibliotecaria, 2008Marca de imp. en port.La h. en bl. corresponde a [cristus]4Las il. son grab. xil. DE figuras geométrica

Joshua Pitcher

24-1Indian AffairsReport : Petition of J. Pitcher. [293] Late Indian sub-agent for the Sioux of the Missouri River.1836-2