126 research outputs found
Optimisation of material properties for the modelling of large deformation manufacturing processes using a finite element model of the Gleeble compression test
The finite element modelling of manufacturing processes often requires a large amount of large plastic strain flow stress data in order to represent the material of interest over a wide range of temperatures and strain rates. Compression data generated using a Gleeble thermo-mechanical simulator is difficult to interpret due to the complex temperature and strain fields, which exist within the specimen during the test. In this study, a non-linear optimisation process is presented, which includes a finite element model of the compression process to accurately determine the constants of a five-parameter Norton–Hoff material model. The optimisation process is first verified using a reduced three-parameter model and then the full five-parameter model using a known set of constants to produce the target data, from which the errors are assessed. Following this, the optimisation is performed using experimental target data starting from a set of constants derived from the test data using an initial least-squares fit and also an arbitrary starting point within the parameter space. The results of these tests yield coefficients differing by a maximum of less than 10% and significantly improve the representation of the flow stress of the material
Criminal narrative experience: relating emotions to offence narrative roles during crime commission
A neglected area of research within criminality has been that of the experience of the offence for the offender. The present study investigates the emotions and narrative roles that are experienced by an offender while committing a broad range of crimes and proposes a model of Criminal Narrative Experience (CNE). Hypotheses were derived from the Circumplex of Emotions (Russell, 1997), Frye (1957), Narrative Theory (McAdams, 1988) and its link with Investigative Psychology (Canter, 1994). The analysis was based on 120 cases. Convicted for a variety of crimes, incarcerated criminals were interviewed and the data were subjected to Smallest Space Analysis (SSA). Four themes of Criminal Narrative Experience (CNE) were identified: Elated Hero, Calm Professional, Distressed Revenger and Depressed Victim in line with the recent theoretical framework posited for Narrative Offence Roles (Youngs & Canter, 2012). The theoretical implications for understanding crime on the basis of the Criminal Narrative Experience (CNE) as well as practical implications are discussed
The Internally Truncated LRP5 Receptor Presents a Therapeutic Target in Breast Cancer
BACKGROUND: Breast cancer is a common malignant disease, which may be caused by a number of genes deregulated by genomic or epigenomic events. Deregulated WNT/beta-catenin signaling with accumulation of beta-catenin is common in breast tumors, but mutations in WNT signaling pathway components have been rare. An aberrantly spliced internally truncated LRP5 receptor (LRP5Delta666-809, LRP5Delta) was shown recently to be resistant to DKK1 inhibition, and was required for beta-catenin accumulation in hyperparathyroid tumors and parathyroid tumor growth. METHODOLOGY/PRINCIPAL FINDINGS: Here we show, by reverse transcription PCR and Western blot analysis, that LRP5Delta is frequently expressed in breast tumors of different cancer stage (58-100%), including carcinoma in situ and metastatic carcinoma. LRP5Delta was required in MCF7 breast cancer cells for the non-phosphorylated active beta-catenin level, transcription activity of beta-catenin, cell growth in vitro, and breast tumor growth in a xenograft SCID mouse model. WNT3 ligand, but not WNT1 and WNT3A augmented the endogenous beta-catenin activity of MCF7 cells in a DKK1-insensitive manner. Furthermore, an anti-LRP5 antibody attenuated beta-catenin activity, inhibited cell growth, and induced apoptosis in LRP5Delta-positive MCF7 and T-47D breast cancer cells, but not in control cells. CONCLUSIONS/SIGNIFICANCE: Our results suggest that the LRP5Delta receptor is strongly implicated in mammary gland tumorigenesis and that its aberrant expression present an early event during disease progression. LRP5 antibody therapy may have a significant role in the treatment of breast cancer
Somatic mutations of GNA11 and GNAQ in CTNNB1-mutant aldosterone-producing adenomas presenting in puberty, pregnancy or menopause.
Most aldosterone-producing adenomas (APAs) have gain-of-function somatic mutations of ion channels or transporters. However, their frequency in aldosterone-producing cell clusters of normal adrenal gland suggests a requirement for codriver mutations in APAs. Here we identified gain-of-function mutations in both CTNNB1 and GNA11 by whole-exome sequencing of 3/41 APAs. Further sequencing of known CTNNB1-mutant APAs led to a total of 16 of 27 (59%) with a somatic p.Gln209His, p.Gln209Pro or p.Gln209Leu mutation of GNA11 or GNAQ. Solitary GNA11 mutations were found in hyperplastic zona glomerulosa adjacent to double-mutant APAs. Nine of ten patients in our UK/Irish cohort presented in puberty, pregnancy or menopause. Among multiple transcripts upregulated more than tenfold in double-mutant APAs was LHCGR, the receptor for luteinizing or pregnancy hormone (human chorionic gonadotropin). Transfections of adrenocortical cells demonstrated additive effects of GNA11 and CTNNB1 mutations on aldosterone secretion and expression of genes upregulated in double-mutant APAs. In adrenal cortex, GNA11/Q mutations appear clinically silent without a codriver mutation of CTNNB1
Functional Dissection of Streptococcus pyogenes M5 Protein: the Hypervariable Region is Essential for Virulence
The surface-localized M protein of Streptococcus pyogenes is a major virulence factor that inhibits phagocytosis, as determined ex vivo. Because little is known about the role of M protein in vivo we analyzed the contribution of different M protein regions to virulence, using the fibrinogen (Fg)-binding M5 protein and a mouse model of acute invasive infection. This model was suitable, because M5 is required for mouse virulence and binds mouse and human Fg equally well, as shown here. Mixed infection experiments with wild type bacteria demonstrated that mutants lacking the N-terminal hypervariable region (HVR) or the Fg-binding B-repeat region were strongly attenuated, while a mutant lacking the conserved C-repeats was only slightly attenuated. Because the HVR of M5 is not required for phagocytosis resistance, our data imply that this HVR plays a major but unknown role during acute infection. The B-repeat region is required for phagocytosis resistance and specifically binds Fg, suggesting that it promotes virulence by binding Fg. However, B-repeat mutants were attenuated even in Fg-deficient mice, implying that the B-repeats may have a second function, in addition to Fg-binding. These data demonstrate that two distinct M5 regions, including the HVR, are essential to virulence during the early stages of an infection. In particular, our data provide the first in vivo evidence that the HVR of an M protein plays a major role in virulence, focusing interest on the molecular role of this region
Extracellular hemoglobin - mediator of inflammation and cell death in the choroid plexus following preterm intraventricular hemorrhage
Потребительский экстремизм как правовое явление
Материалы XIII Междунар. науч. конф. студентов, магистрантов, аспирантов и молодых ученых, Гомель, 21–22 мая 2020 г
Erratum to: Brain-derived neurotrophic factor is produced by skeletal muscle cells in response to contraction and enhances fat oxidation via activation of AMP-activated protein kinase
A comprehensive overview of radioguided surgery using gamma detection probe technology
The concept of radioguided surgery, which was first developed some 60 years ago, involves the use of a radiation detection probe system for the intraoperative detection of radionuclides. The use of gamma detection probe technology in radioguided surgery has tremendously expanded and has evolved into what is now considered an established discipline within the practice of surgery, revolutionizing the surgical management of many malignancies, including breast cancer, melanoma, and colorectal cancer, as well as the surgical management of parathyroid disease. The impact of radioguided surgery on the surgical management of cancer patients includes providing vital and real-time information to the surgeon regarding the location and extent of disease, as well as regarding the assessment of surgical resection margins. Additionally, it has allowed the surgeon to minimize the surgical invasiveness of many diagnostic and therapeutic procedures, while still maintaining maximum benefit to the cancer patient. In the current review, we have attempted to comprehensively evaluate the history, technical aspects, and clinical applications of radioguided surgery using gamma detection probe technology
Studies of the thermo-mechanical material response of a Boron steel by inverse modelling
In numerical forming simulations of the hot stamping process, the lack of reliable material data, especially at higher temperatures gives quite rough estimations of the stamping forces, strains, residual stresses and achieved final product shape. Traditionally, the material is characterised by several isothermal compression or tension tests at elevated temperatures and strain rates. The present work have pointed out an alternative/complementary approach to reduce the number of experiments and to obtain good results by using Gleeble compression tests at continuous cooling with different compression start temperatures. The isothermal mechanical response was established by means of inverse modeling, with start values obtained from isothermal test results. Three different functions describing the flow stress as function of temperature and plastic strain have been tested and compared in usefulness for the steel grade used. The main object function consists of three parts, one from each compression start temperature. The object function in the inverse problem is based on the deviation in compression force-displacement data and radial displacement at the mid point of the specimen. Minimisation of the objective function with respect to the material parameters were performed using an in-house optimization software which is based on the subplex method. The established material response has been evaluated by comparison with data from a separate forming test. For the boron steel in the austenitic phase, the Nemat-Nasser model was found to describe the material response with acceptable agreement within the temperature and strain interval studied in the experimental validation
- …