A Survey of Research into Mixed Criticality Systems

This survey covers research into mixed criticality systems that has been published since Vestal’s seminal paper in 2007, up until the end of 2016. The survey is organised along the lines of the major research areas within this topic. These include single processor analysis (including fixed priority and EDF scheduling, shared resources and static and synchronous scheduling), multiprocessor analysis, realistic models, and systems issues. The survey also explores the relationship between research into mixed criticality systems and other topics such as hard and soft time constraints, fault tolerant scheduling, hierarchical scheduling, cyber physical systems, probabilistic real-time systems, and industrial safety standards

An Energy-Efficient Semi-Partitioned Approach for Hard Real-Time Systems with Voltage and Frequency Islands

The shift from uniprocessor to multi-core architectures has made it difficult to design predictable hard real-time systems (HRTS) since guaranteeing deadlines while achieving high processor utilization remains a major challenge. In addition, due to increasing demands, energy efficiency has become an important design metric in HRTS. To obtain energy savings, most multi-core systems use dynamic voltage and frequency scaling (DVFS) to reduce dynamic power consumption when the system is underloaded. However, in many multi-core systems, DVFS is implemented using voltage and frequency islands (VFI), implying that individual cores cannot independently select their voltage and frequency (v/f) pairs, thus resulting in less energy savings when existing energy-aware task assignment and scheduling techniques are used. In this thesis, we present an analysis of the increase in energy consumption in the presence of VFI. Further, we propose a semi-partitioned approach called EDF-hv to reduce the energy consumption of HRTS on multi-core systems with VFI. Simulation results revealed that when workload imbalance among the cores is sufficiently high, EDF-hv can reduce system energy consumption by 15.9% on average

On the Design of Real-Time Systems on Multi-Core Platforms under Uncertainty

Real-time systems are computing systems that demand the assurance of not only the logical correctness of computational results but also the timing of these results. To ensure timing constraints, traditional real-time system designs usually adopt a worst-case based deterministic approach. However, such an approach is becoming out of sync with the continuous evolution of IC technology and increased complexity of real-time applications. As IC technology continues to evolve into the deep sub-micron domain, process variation causes processor performance to vary from die to die, chip to chip, and even core to core. The extensive resource sharing on multi-core platforms also significantly increases the uncertainty when executing real-time tasks. The traditional approach can only lead to extremely pessimistic, and thus, unpractical design of real-time systems. Our research seeks to address the uncertainty problem when designing real-time systems on multi-core platforms. We first attacked the uncertainty problem caused by process variation. We proposed a virtualization framework and developed techniques to optimize the system\u27s performance under process variation. We further studied the problem on peak temperature minimization for real-time applications on multi-core platforms. Three heuristics were developed to reduce the peak temperature for real-time systems. Next, we sought to address the uncertainty problem in real-time task execution times by developing statistical real-time scheduling techniques. We studied the problem of fixed-priority real-time scheduling of implicit periodic tasks with probabilistic execution times on multi-core platforms. We further extended our research for tasks with explicit deadlines. We introduced the concept of harmonic to a more general task set, i.e. tasks with explicit deadlines, and developed new task partitioning techniques. Throughout our research, we have conducted extensive simulations to study the effectiveness and efficiency of our developed techniques. The increasing process variation and the ever-increasing scale and complexity of real-time systems both demand a paradigm shift in the design of real-time applications. Effectively dealing with the uncertainty in design of real-time applications is a challenging but also critical problem. Our research is such an effort in this endeavor, and we conclude this dissertation with discussions of potential future work

Energy-Aware Real-Time Scheduling on Heterogeneous and Homogeneous Platforms in the Era of Parallel Computing

Multi-core processors increasingly appear as an enabling platform for embedded systems, e.g., mobile phones, tablets, computerized numerical controls, etc. The parallel task model, where a task can execute on multiple cores simultaneously, can efficiently exploit the multi-core platform\u27s computational ability. Many computation-intensive systems (e.g., self-driving cars) that demand stringent timing requirements often evolve in the form of parallel tasks. Several real-time embedded system applications demand predictable timing behavior and satisfy other system constraints, such as energy consumption. Motivated by the facts mentioned above, this thesis studies the approach to integrating the dynamic voltage and frequency scaling (DVFS) policy with real-time embedded system application\u27s internal parallelism to reduce the worst-case energy consumption (WCEC), an essential requirement for energy-constrained systems. First, we propose an energy-sub-optimal scheduler, assuming the per-core speed tuning feature for each processor. Then we extend our solution to adapt the clustered multi-core platform, where at any given time, all the processors in the same cluster run at the same speed. We also present an analysis to exploit a task\u27s probabilistic information to improve the average-case energy consumption (ACEC), a common non-functional requirement of embedded systems. Due to the strict requirement of temporal correctness, the majority of the real-time system analysis considered the worst-case scenario, leading to resource over-provisioning and cost. The mixed-criticality (MC) framework was proposed to minimize energy consumption and resource over-provisioning. MC scheduling has received considerable attention from the real-time system research community, as it is crucial to designing safety-critical real-time systems. This thesis further addresses energy-aware scheduling of real-time tasks in an MC platform, where tasks with varying criticality levels (i.e., importance) are integrated into a common platform. We propose an algorithm GEDF-VD for scheduling MC tasks with internal parallelism in a multiprocessor platform. We also prove the correctness of GEDF-VD, provide a detailed quantitative evaluation, and reported extensive experimental results. Finally, we present an analysis to exploit a task\u27s probabilistic information at their respective criticality levels. Our proposed approach reduces the average-case energy consumption while satisfying the worst-case timing requirement

Mixed Criticality Systems - A Review : (13th Edition, February 2022)

This review covers research on the topic of mixed criticality systems that has been published since Vestal’s 2007 paper. It covers the period up to end of 2021. The review is organised into the following topics: introduction and motivation, models, single processor analysis (including job-based, hard and soft tasks, fixed priority and EDF scheduling, shared resources and static and synchronous scheduling), multiprocessor analysis, related topics, realistic models, formal treatments, systems issues, industrial practice and research beyond mixed-criticality. A list of PhDs awarded for research relating to mixed-criticality systems is also included

Real-Time Wireless Sensor-Actuator Networks for Cyber-Physical Systems

A cyber-physical system (CPS) employs tight integration of, and coordination between computational, networking, and physical elements. Wireless sensor-actuator networks provide a new communication technology for a broad range of CPS applications such as process control, smart manufacturing, and data center management. Sensing and control in these systems need to meet stringent real-time performance requirements on communication latency in challenging environments. There have been limited results on real-time scheduling theory for wireless sensor-actuator networks. Real-time transmission scheduling and analysis for wireless sensor-actuator networks requires new methodologies to deal with unique characteristics of wireless communication. Furthermore, the performance of a wireless control involves intricate interactions between real-time communication and control. This thesis research tackles these challenges and make a series of contributions to the theory and system for wireless CPS. (1) We establish a new real-time scheduling theory for wireless sensor-actuator networks. (2) We develop a scheduling-control co-design approach for holistic optimization of control performance in a wireless control system. (3) We design and implement a wireless sensor-actuator network for CPS in data center power management. (4) We expand our research to develop scheduling algorithms and analyses for real-time parallel computing to support computation-intensive CPS

Adaptive Mid-term and Short-term Scheduling of Mixed-criticality Systems

A mixed-criticality real-time system is a real-time system having multiple tasks classified according to their criticality. Research on mixed-criticality systems started to provide an effective and cost efficient a priori verification process for safety critical systems. The higher the criticality of a task within a system and the more the system should guarantee the required level of service for it. However, such model poses new challenges with respect to scheduling and fault tolerance within real-time systems. Currently, mixed-criticality scheduling protocols severely degrade lower criticality tasks in case of resource shortage to provide the required level of service for the most critical ones. The actual research challenge in this field is to devise robust scheduling protocols to minimise the impact on less critical tasks. This dissertation introduces two approaches, one short-term and the other medium-term, to appropriately allocate computing resources to tasks within mixed-criticality systems both on uniprocessor and multiprocessor systems. The short-term strategy consists of a protocol named Lazy Bailout Protocol (LBP) to schedule mixed-criticality task sets on single core architectures. Scheduling decisions are made about tasks that are active in the ready queue and that have to be dispatched to the CPU. LBP minimises the service degradation for lower criticality tasks by providing to them a background execution during the system idle time. After, I refined LBP with variants that aim to further increase the service level provided for lower criticality tasks. However, this is achieved at an increased cost of either system offline analysis or complexity at runtime. The second approach, named Adaptive Tolerance-based Mixed-criticality Protocol (ATMP), decides at runtime which task has to be allocated to the active cores according to the available resources. ATMP permits to optimise the overall system utility by tuning the system workload in case of shortage of computing capacity at runtime. Unlike the majority of current mixed-criticality approaches, ATMP allows to smoothly degrade also higher criticality tasks to keep allocated lower criticality ones

Many suspensions, many problems: a review of self-suspending tasks in real-time systems

In general computing systems, a job (process/task) may suspend itself whilst it is waiting for some activity to complete, e.g., an accelerator to return data. In real-time systems, such self-suspension can cause substantial performance/schedulability degradation. This observation, first made in 1988, has led to the investigation of the impact of self-suspension on timing predictability, and many relevant results have been published since. Unfortunately, as it has recently come to light, a number of the existing results are flawed. To provide a correct platform on which future research can be built, this paper reviews the state of the art in the design and analysis of scheduling algorithms and schedulability tests for self-suspending tasks in real-time systems. We provide (1) a systematic description of how self-suspending tasks can be handled in both soft and hard real-time systems; (2) an explanation of the existing misconceptions and their potential remedies; (3) an assessment of the influence of such flawed analyses on partitioned multiprocessor fixed-priority scheduling when tasks synchronize access to shared resources; and (4) a discussion of the computational complexity of analyses for different self-suspension task models

Escalonar sistemas de tempo-real de alta críticalidade

Cyclic executives are used to schedule safety-critical real-time systems because of their determinism, simplicity, and efficiency. One major challenge of the cyclic executive model is to produce the cyclic scheduling timetable. This problem is related to the bin-packing problem [34] and is NP-Hard in the strong sense. Unnecessary context switches within the scheduling table can introduce significant overhead; in IMA (Integrated Modular Avionics), cache-related overheads can increase task execution times up to 33% [18]. Developed in the context of the Software Engineering Master’s Degree at ISEP, the Polytechnic Institute of Engineering in Porto Portugal, this thesis contains two contributions to the scheduling literature. The first is a precise and exact approach to computing the slack of a job set that is schedule policy independent. The method introduces several operations to update and maintain the slack at runtime, ensuring the slack of all jobs is valid and coherent. The second contribution is the definition of a state-of-the-art preemptive scheduling algorithm focused on minimizing the number of system preemptions for real-time safety-critical applications within a reasonable amount of time. Both contributions have been implemented and extensively tested in scala. Experimental results suggest our scheduling algorithm has similar non-preemptive schedulability ratio than Chain Window RM [69], yet lower ratio in high utilizations than Chain Window EDF [69] and BB-Moore [68]. For ask sets that failed to be scheduled non-preemptively, 98-99% of all jobs are scheduled without preemptions. Considering the fact that our scheduler is preemptive, being able to compete with non-preemptive schedulers is an excellent result indeed. In terms of execution time, our proposal is multiple orders of magnitude faster than the aforementioned algorithms. Both contributions of this work are planned to be presented at future conferences such as RTSS@Work and RTAS

Parallel Real-Time Scheduling for Latency-Critical Applications

In order to provide safety guarantees or quality of service guarantees, many of today\u27s systems consist of latency-critical applications, e.g. applications with timing constraints. The problem of scheduling multiple latency-critical jobs on a multiprocessor or multicore machine has been extensively studied for sequential (non-parallizable) jobs and different system models and different objectives have been considered. However, the computational requirement of a single job is still limited by the capacity of a single core. To provide increasingly complex functionalities of applications and to complete their higher computational demands within the same or even more stringent timing constraints, we must exploit the internal parallelism of jobs, where individual jobs are parallel programs and can potentially utilize more than one core in parallel. However, there is little work considering scheduling multiple parallel jobs that are latency-critical. This dissertation focuses on developing new scheduling strategies, analysis tools, and practical platform design techniques to enable efficient and scalable parallel real-time scheduling for latency-critical applications on multicore systems. In particular, the research is focused on two types of systems: (1) static real-time systems for tasks with deadlines where the temporal properties of the tasks that need to execute is known a priori and the goal is to guarantee the temporal correctness of the tasks prior to their executions; and (2) online systems for latency-critical jobs where multiple jobs arrive over time and the goal to optimize for a performance objective of jobs during the execution. For static real-time systems for parallel tasks, several scheduling strategies, including global earliest deadline first, global rate monotonic and a novel federated scheduling, are proposed, analyzed and implemented. These scheduling strategies have the best known theoretical performance for parallel real-time tasks under any global strategy, any fixed priority scheduling and any scheduling strategy, respectively. In addition, federated scheduling is generalized to systems with multiple criticality levels and systems with stochastic tasks. Both numerical and empirical experiments show that federated scheduling and its variations have good schedulability performance and are efficient in practice. For online systems with multiple latency-critical jobs, different online scheduling strategies are proposed and analyzed for different objectives, including maximizing the number of jobs meeting a target latency, maximizing the profit of jobs, minimizing the maximum latency and minimizing the average latency. For example, a simple First-In-First-Out scheduler is proven to be scalable for minimizing the maximum latency. Based on this theoretical intuition, a more practical work-stealing scheduler is developed, analyzed and implemented. Empirical evaluations indicate that, on both real world and synthetic workloads, this work-stealing implementation performs almost as well as an optimal scheduler