Nuclear Power

We are fortunate to live in incredibly exciting and incredibly challenging time. Energy demands due to economic growth and increasing population must be satisfied in a sustainable manner assuring inherent safety, efficiency and no or minimized environmental impact. These considerations are among the reasons that lead to serious interest in deploying nuclear power as a sustainable energy source. At the same time, catastrophic earthquake and tsunami events in Japan resulted in the nuclear accident that forced us to rethink our approach to nuclear safety, design requirements and facilitated growing interests in advanced nuclear energy systems. This book is one in a series of books on nuclear power published by InTech. It consists of six major sections housing twenty chapters on topics from the key subject areas pertinent to successful development, deployment and operation of nuclear power systems worldwide. The book targets everyone as its potential readership groups - students, researchers and practitioners - who are interested to learn about nuclear power

Nuclear Power - Deployment, Operation and Sustainability

We are fortunate to live in incredibly exciting and incredibly challenging time. Energy demands due to economic growth and increasing population must be satisfied in a sustainable manner assuring inherent safety, efficiency and no or minimized environmental impact. These considerations are among the reasons that lead to serious interest in deploying nuclear power as a sustainable energy source. At the same time, catastrophic earthquake and tsunami events in Japan resulted in the nuclear accident that forced us to rethink our approach to nuclear safety, design requirements and facilitated growing interests in advanced nuclear energy systems. This book is one in a series of books on nuclear power published by InTech. It consists of six major sections housing twenty chapters on topics from the key subject areas pertinent to successful development, deployment and operation of nuclear power systems worldwide. The book targets everyone as its potential readership groups - students, researchers and practitioners - who are interested to learn about nuclear power

Probabilistic Models for Life Cycle Management of Energy Infrastructure Systems

The degradation of aging energy infrastructure systems has the potential to increase the risk of failure, resulting in power outage and costly unplanned maintenance work. Therefore, the development of scientific and cost-effective life cycle management (LCM) strategies has become increasingly important to maintain energy infrastructure. Since degradation of aging equipment is an uncertain process which depends on many factors, a risk-based approach is required to consider the effect of various uncertainties in LCM. The thesis presents probabilistic models to support risk-based life cycle management of energy infrastructure systems. In addition to uncertainty in degradation process, the inspection data collected by the energy industry is often censored and truncated which make it difficult to estimate the lifetime probability distribution of the equipment. The thesis presents modern statistical techniques in quantifying uncertainties associated with inspection data and to estimate the lifetime distributions in a consistent manner. Age-based and sequential inspection-based replacement models are proposed for maintenance of component in a large-distribution network. A probabilistic lifetime model to consider the effect of imperfect preventive maintenance of a component is developed and its impact to maintenance optimization is illustrated. The thesis presents a stochastic model for the pitting corrosion process in steam generators (SG), which is a serious form of degradation in SG tubing of some nuclear generating stations. The model is applied to estimate the number of tubes requiring plugging and the probability of tube leakage in an operating period. The application and benefits of the model are illustrated in the context of managing the life cycle of a steam generator

Nuclear Power - Control, Reliability and Human Factors

Advances in reactor designs, materials and human-machine interfaces guarantee safety and reliability of emerging reactor technologies, eliminating possibilities for high-consequence human errors as those which have occurred in the past. New instrumentation and control technologies based in digital systems, novel sensors and measurement approaches facilitate safety, reliability and economic competitiveness of nuclear power options. Autonomous operation scenarios are becoming increasingly popular to consider for small modular systems. This book belongs to a series of books on nuclear power published by InTech. It consists of four major sections and contains twenty-one chapters on topics from key subject areas pertinent to instrumentation and control, operation reliability, system aging and human-machine interfaces. The book targets a broad potential readership group - students, researchers and specialists in the field - who are interested in learning about nuclear power

Models and Data Used for Assessing the Ageing of Systems, Structures and Components

This report summarizes and presents the results of the studies conducted in the frame of European Network on Use of Probabilistic Safety Assessment (PSA) for Evaluation of Ageing Effects to the Safety of Energy Facilities (EC JRC IE Ageing PSA Network). The Network was initiated and will be operated within the framework of the JRC FP6/ 7 Institutional Action "Analysis and Management of Nuclear Accidents" (AMA). Report is focussed on the reliability models and data could be used for assessing the ageing of systems, structures and components including statistical and physical ones. The results of the case study on demonstration of possible application of statistical evaluation of ageing trend in case of I&C and electrical components presented in Appendix B.JRC.F.4-Nuclear design safet

Current State of Research on Pressurized Water Reactor Safety

For more than 40 years, IPSN then IRSN has conducted research and development on nuclear safety, specifically concerning pressurized water reactors, which are the reactor type used in France. This publication reports on the progress of this research and development in each area of study – loss-of-coolant accidents, core melt accidents, fires and external hazards, component aging, etc. –, the remaining uncertainties and, in some cases, new measures that should be developed to consolidate the safety of today’s reactors and also those of tomorrow. A chapter of this report is also devoted to research into human and organizational factors, and the human and social sciences more generally. All of the work is reviewed in the light of the safety issues raised by feedback from major accidents such as Chernobyl and Fukushima Daiichi, as well as the issues raised by assessments conducted, for example, as part of the ten-year reviews of safety at French nuclear reactors. Finally, through the subjects it discusses, this report illustrates the many partnerships and exchanges forged by IRSN with public, industrial and academic bodies both within Europe and internationally

The Application of Mixed Reality Within Civil Nuclear Manufacturing and Operational Environments

This thesis documents the design and application of Mixed Reality (MR) within a nuclear manufacturing cell through the creation of a Digitally Assisted Assembly Cell (DAAC). The DAAC is a proof of concept system, combining full body tracking within a room sized environment and bi-directional feedback mechanism to allow communication between users within the Virtual Environment (VE) and a manufacturing cell. This allows for training, remote assistance, delivery of work instructions, and data capture within a manufacturing cell. The research underpinning the DAAC encompasses four main areas; the nuclear industry, Virtual Reality (VR) and MR technology, MR within manufacturing, and finally the 4 th Industrial Revolution (IR4.0). Using an array of Kinect sensors, the DAAC was designed to capture user movements within a real manufacturing cell, which can be transferred in real time to a VE, creating a digital twin of the real cell. Users can interact with each other via digital assets and laser pointers projected into the cell, accompanied by a built-in Voice over Internet Protocol (VoIP) system. This allows for the capture of implicit knowledge from operators within the real manufacturing cell, as well as transfer of that knowledge to future operators. Additionally, users can connect to the VE from anywhere in the world. In this way, experts are able to communicate with the users in the real manufacturing cell and assist with their training. The human tracking data fills an identified gap in the IR4.0 network of Cyber Physical System (CPS), and could allow for future optimisations within manufacturing systems, Material Resource Planning (MRP) and Enterprise Resource Planning (ERP). This project is a demonstration of how MR could prove valuable within nuclear manufacture. The DAAC is designed to be low cost. It is hoped this will allow for its use by groups who have traditionally been priced out of MR technology. This could help Small to Medium Enterprises (SMEs) close the double digital divide between themselves and larger global corporations. For larger corporations it offers the benefit of being low cost, and, is consequently, easier to roll out across the value chain. Skills developed in one area can also be transferred to others across the internet, as users from one manufacturing cell can watch and communicate with those in another. However, as a proof of concept, the DAAC is at Technology Readiness Level (TRL) five or six and, prior to its wider application, further testing is required to asses and improve the technology. The work was patented in both the UK (S. R EDDISH et al., 2017a), the US (S. R EDDISH et al., 2017b) and China (S. R EDDISH et al., 2017c). The patents are owned by Rolls-Royce and cover the methods of bi-directional feedback from which users can interact from the digital to the real and vice versa. Stephen Reddish Mixed Mode Realities in Nuclear Manufacturing Key words: Mixed Mode Reality, Virtual Reality, Augmented Reality, Nuclear, Manufacture, Digital Twin, Cyber Physical Syste