Experiments on reaction null-space based decoupled control of a flexible structure mounted manipulator system

Proceedings of the 1997 IEEE Intemational Conference on Robotics and Automation Albuquerque, New Mexico - April 199

Multidimensional Trajectories Generation with Vibration Suppression Capabilities: the Role of Exponential B-splines

In this paper, exponential B-spline trajectories are presented and discussed. They are generated by means of a chain of filters characterized by a truncated exponential impulse response. If properly tuned, the filters applied to a vibrating plant are able to cancel the oscillations and in this sense the resulting splines are optimized with respect to the problem of vibrations suppression. Different types of exponential B-spline are illustrated, with one or more exponential filters in the chain, and the procedure for the interpolation of a given set of desired via-points, with a proper choice of the control points, is shown. As a matter of fact, exponential B-splines, generated by means of dynamic filters, combine the vibration suppression capability of input shapers and smoothing filters with the possibility of exactly interpolating some via-points. The advantages of these curves are experimental proved by considering the motion of a spherical pendulum connected to the flange of an industrial robot

Genetic algorithm optimization and control system design of flexible structures

This paper presents an investigation into the deployment of genetic algorithm (GA)-based controller design and optimization for vibration suppression in flexible structures. The potential of GA is explored in three case studies. In the first case study, the potential of GA is demonstrated in the development and optimization of a hybrid learning control scheme for vibration control of flexible manipulators. In the second case study, an active control mechanism for vibration suppression of flexible beam structures using GA optimization technique is proposed. The third case study presents the development of an effective adaptive command shaping control scheme for vibration control of a twin rotor system, where GA is employed to optimize the amplitudes and time locations of the impulses in the proposed control algorithm. The effectiveness of the proposed control schemes is verified in both an experimental and a simulation environment, and their performances are assessed in both the time and frequency domains

Modeling and Control of Flexible Link Manipulators

Autonomous maritime navigation and offshore operations have gained wide attention with the aim of reducing operational costs and increasing reliability and safety. Offshore operations, such as wind farm inspection, sea farm cleaning, and ship mooring, could be carried out autonomously or semi-autonomously by mounting one or more long-reach robots on the ship/vessel. In addition to offshore applications, long-reach manipulators can be used in many other engineering applications such as construction automation, aerospace industry, and space research. Some applications require the design of long and slender mechanical structures, which possess some degrees of flexibility and deflections because of the material used and the length of the links. The link elasticity causes deflection leading to problems in precise position control of the end-effector. So, it is necessary to compensate for the deflection of the long-reach arm to fully utilize the long-reach lightweight flexible manipulators. This thesis aims at presenting a unified understanding of modeling, control, and application of long-reach flexible manipulators. State-of-the-art dynamic modeling techniques and control schemes of the flexible link manipulators (FLMs) are discussed along with their merits, limitations, and challenges. The kinematics and dynamics of a planar multi-link flexible manipulator are presented. The effects of robot configuration and payload on the mode shapes and eigenfrequencies of the flexible links are discussed. A method to estimate and compensate for the static deflection of the multi-link flexible manipulators under gravity is proposed and experimentally validated. The redundant degree of freedom of the planar multi-link flexible manipulator is exploited to minimize vibrations. The application of a long-reach arm in autonomous mooring operation based on sensor fusion using camera and light detection and ranging (LiDAR) data is proposed.publishedVersio

A Zero-placement Technique for Designing Shaped Inputs to Suppress Multiple-mode Vibration

than traditionally designed shapers of comparable duration. Computer simulations of a single-mode system demonstrated the advantages of the new shapers. MACE results collected aboard the Space Shuttle Endeavor demonstrated the shapers' vibration-reducing abiUty on real structures. Acknowledgments W

An efficient finite element formulation of dynamics for a flexible robot with different type of joints

If two adjacent links of a flexible robot are connected via a revolute joint or a fixed prismatic joint, the relative motion of the next link will depend on both the joint motion and the elastic displacement of the distal end of the previous link. However, if the two adjacent links are connected via a sliding prismatic joint, the relative motion of the next link will depend additionally on the elastic deformation distributed along the previous link. Therefore, formulation of the motion equations for a multi-link flexible robot consisting of the revolute joints, the fixed prismatic joints and the sliding prismatic joints is challenging. In this study, the finite element kinematic and dynamic formulation was successfully developed and validated for the flexible robot, in which a transformation matrix is proposed to describe the kinematics of both the joint motion and the link deformation. Additionally, a new recursive formulation of the dynamic equations is introduced. As compared with the previous methods, the time complexity of the formulation is reduced by O(2η), where η is the number of finite elements on all links. The numerical examples and experiments were implemented to validate the proposed kinematic and dynamic modelling method

Manipulating liquids with robots: A sloshing-free solution

This paper addresses the problem of suppressing sloshing dynamics in liquid handling robotic systems by an appropriate design of position/orientation trajectories. Specifically, a dynamic system, i.e. the exponential filter, is used to filter the desired trajectory for the liquid-filled vessel moved by the robot and counteract the sloshing effect. To this aim, the vessel has been modelled as a spherical pendulum of proper mass/length subject to the accelerations imposed by the robot and the problem has been approached in terms of vibration suppression to cancel the residual oscillations of the pendulum, i.e. the pendulum swing at the end of the reference rest-to-rest motion. In addition, in order to reduce the relative motion between liquid and vessel, an orientation compensation mechanism has been devised aiming to maintain the vessel aligned with the pendulum during the motion. The effectiveness of the proposed approach, both in simple point-to-point motions and complex multi-point trajectories, has been proved by means of an exhaustive set of experimental tests on an industrial manipulator that moves a cylindrical vessel filled with water. This innovative solution effectively uses all the degrees of freedom of the robotic manipulator to successfully suppress sloshing, thus significantly improving the performances of the robotic system. Furthermore, the proposed solution, showing a high degree of robustness as well as intrinsic design simplicity, is very promising for designing novel industrial robotics applications with a short time-to-market across key manufacturing sectors (e.g., food and beverage, among others)

A novel coordination framework for multi-robot systems

Having made great progress tackling the basic problems concerning single-robot systems, many researchers shifted their focus towards the study of multi-robot systems (MRS). MRS were shortly found to be a perfect t for tasks considered to be hard, complex or even impossible for a single robot to perform, e.g. spatially separate tasks. One core research problem of MRS is robots' coordinated motion planning and control. Arti cial potential elds (APFs) and virtual spring-damper bonds are among the most commonly used models to attack the trajectory planning problem of MRS coordination. However, although mathematically sound, these approaches fail to guarantee inter-robot collision-free path generation. This is particularly the case when robots' dynamics, nonholonomic constraints and complex geometry are taken into account. In this thesis, a novel bio-inspired collision avoidance framework via virtual shells is proposed and augmented into the high-level trajectory planner. Safe trajectories can hence be generated for the low-level controllers to track. Motion control is handled by the design of hierarchical controllers which utilize virtual inputs. Several distinct coordinated task scenarios for 2D and 3D environments are presented as a proof of concept. Simulations are conducted with groups of three, four, ve and ten nonholonomic mobile robots as well as groups of three and ve quadrotor UAVs. The performance of the overall improved coordination structure is veri ed with very promising result