Development of FPGA based Standalone Tunable Fuzzy Logic Controllers

Soft computing techniques differ from conventional (hard) computing, in that unlike hard computing, it is tolerant of imprecision, uncertainty, partial truth, and approximation. In effect, the role model for soft computing is the human mind and its ability to address day-to-day problems. The principal constituents of Soft Computing (SC) are Fuzzy Logic (FL), Evolutionary Computation (EC), Machine Learning (ML) and Artificial Neural Networks (ANNs). This thesis presents a generic hardware architecture for type-I and type-II standalone tunable Fuzzy Logic Controllers (FLCs) in Field Programmable Gate Array (FPGA). The designed FLC system can be remotely configured or tuned according to expert operated knowledge and deployed in different applications to replace traditional Proportional Integral Derivative (PID) controllers. This re-configurability is added as a feature to existing FLCs in literature. The FLC parameters which are needed for tuning purpose are mainly input range, output range, number of inputs, number of outputs, the parameters of the membership functions like slope and center points, and an If-Else rule base for the fuzzy inference process. Online tuning enables users to change these FLC parameters in real-time and eliminate repeated hardware programming whenever there is a need to change. Realization of these systems in real-time is difficult as the computational complexity increases exponentially with an increase in the number of inputs. Hence, the challenge lies in reducing the rule base significantly such that the inference time and the throughput time is perceivable for real-time applications. To achieve these objectives, Modified Rule Active 2 Overlap Membership Function (MRA2-OMF), Modified Rule Active 3 Overlap Membership Function (MRA3-OMF), Modified Rule Active 4 Overlap Membership Function (MRA4-OMF), and Genetic Algorithm (GA) base rule optimization methods are proposed and implemented. These methods reduce the effective rules without compromising system accuracy and improve the cycle time in terms of Fuzzy Logic Inferences Per Second (FLIPS). In the proposed system architecture, the FLC is segmented into three independent modules, fuzzifier, inference engine with rule base, and defuzzifier. Fuzzy systems employ fuzzifier to convert the real world crisp input into the fuzzy output. In type 2 fuzzy systems there are two fuzzifications happen simultaneously from upper and lower membership functions (UMF and LMF) with subtractions and divisions. Non-restoring, very high radix, and newton raphson approximation are most widely used division algorithms in hardware implementations. However, these prevalent methods have a cost of more latency. In order to overcome this problem, a successive approximation division algorithm based type 2 fuzzifier is introduced. It has been observed that successive approximation based fuzzifier computation is faster than the other type 2 fuzzifier. A hardware-software co-design is established on Virtex 5 LX110T FPGA board. The MATLAB Graphical User Interface (GUI) acquires the fuzzy (type 1 or type 2) parameters from users and a Universal Asynchronous Receiver/Transmitter (UART) is dedicated to data communication between the hardware and the fuzzy toolbox. This GUI is provided to initiate control, input, rule transfer, and then to observe the crisp output on the computer. A proposed method which can support canonical fuzzy IF-THEN rules, which includes special cases of the fuzzy rule base is included in Digital Fuzzy Logic Controller (DFLC) architecture. For this purpose, a mealy state machine is incorporated into the design. The proposed FLCs are implemented on Xilinx Virtex-5 LX110T. DFLC peripheral integration with Micro-Blaze (MB) processor through Processor Logic Bus (PLB) is established for Intellectual Property (IP) core validation. The performance of the proposed systems are compared to Fuzzy Toolbox of MATLAB. Analysis of these designs is carried out by using Hardware-In-Loop (HIL) test to control various plant models in MATLAB/Simulink environments

FPGA design methodology for industrial control systems—a review

This paper reviews the state of the art of fieldprogrammable gate array (FPGA) design methodologies with a focus on industrial control system applications. This paper starts with an overview of FPGA technology development, followed by a presentation of design methodologies, development tools and relevant CAD environments, including the use of portable hardware description languages and system level programming/design tools. They enable a holistic functional approach with the major advantage of setting up a unique modeling and evaluation environment for complete industrial electronics systems. Three main design rules are then presented. These are algorithm refinement, modularity, and systematic search for the best compromise between the control performance and the architectural constraints. An overview of contributions and limits of FPGAs is also given, followed by a short survey of FPGA-based intelligent controllers for modern industrial systems. Finally, two complete and timely case studies are presented to illustrate the benefits of an FPGA implementation when using the proposed system modeling and design methodology. These consist of the direct torque control for induction motor drives and the control of a diesel-driven synchronous stand-alone generator with the help of fuzzy logic

On Design and Implementation of Generic Fuzzy Logic Controllers

Soft computing techniques, unlike traditional deterministic logic based computing techniques, sometimes also called as hard computing, are tolerant of imprecision, uncertainty, and approximation. The primary inspiration for soft computing is the human mind and its ability to address day-to-day problems. The primary constituents of soft computing techniques are Artificial Neural Network, Fuzzy Logic Systems, and Evolutionary Computing. This thesis presents design and implementation of a generic hardware architecture based Type-IMamdani fuzzy logic controller (FLC) implemented on a programmable device, which can be remotely configured in real-time over Ethernet. This reconfigurability is added as a feature to existing FLCs in literature. It enables users to change parameters (those drive the FLC systems) in real-time and eliminate repeated hardware programming whenever there is a need. Realization of these systems in real-time is difficult as the computational complexity increases exponentially with an increase in the number of inputs. Hence challenge lies in reducing the Rulebase significantly such that the inference time and the throughput time is perceivable for real-time applications. To achieve these objectives, a modified thresholded fired rules hypercube (MT-FRHC) algorithm for Rulebase reduction is proposed and implemented. MT-FRHC reduces the useful rules without compromising system accuracy and improves the cycle time in terms of fuzzy logic operations per second (FzLOPS). It is imperative to understand that there are over sixty reconfigurable parameters, and it becomes an arduous task for a user to manage them. Therefore, a genetic algorithm based parameter extraction technique is proposed. This will help to develop a course tuning and provide default parameters that can be later fine-tuned by the users remotely through the Web-based User Interface. A hardware software codesign architecture for FLC is developed on TI C6748 DSP hardware with Sys/BIOS RTOS and seamlessly integrated with a webbased user interface (WebUI) for reconfigurability. Fuzzy systems employ defuzzifier to convert the fuzzy output into the real world crisp output. Centroid of Area (CoA) method is most widely used defuzzification method for control applications. However, the prevalent method of CoA computation is based on the principle of Riemann sum which is computationally complex. A vertices based CoA (VBCoA) defuzzification method is introduced. It has been observed that the proposed VBCoA method for COA computation is faster than the Riemann sum based CoA computation. A code optimization technique, exclusive to TI DSPs, is implemented to achieve memory and machine cycle optimization. The WebUI is developed in accordance to a client–server model using ASP.NET. It acquires fuzzy parameters from users, and a server application is dedicated to handling data communication between the hardware and the server. Testing and analysis of this hardware G-FLCS has been carried out by using hardware-in-loop test to control various system models in Simulink environment which includes water level control in a two tank system, intelligent cruise control system, speed control of an armature controlled DC motor and anti-windup control. The performance of the proposed G-FLCS is compared to Fuzzy Inference System of Matlab Fuzzy Logic Toolbox and PID controller in terms of settling time, transient time and steady state error. This proposed MT-FRHC based G-FLCS with VBCoA defuzzification implemented on C6748 DSP was finally deployed to control the radial position of plasma in Aditya Tokamak fusion reactor. The proposed G-FLCS is observed to deliver a smooth and fast system response

Measurements, Models, Systems and Design

531 s.

North American Fuzzy Logic Processing Society (NAFIPS 1992), volume 2

This document contains papers presented at the NAFIPS '92 North American Fuzzy Information Processing Society Conference. More than 75 papers were presented at this Conference, which was sponsored by NAFIPS in cooperation with NASA, the Instituto Tecnologico de Morelia, the Indian Society for Fuzzy Mathematics and Information Processing (ISFUMIP), the Instituto Tecnologico de Estudios Superiores de Monterrey (ITESM), the International Fuzzy Systems Association (IFSA), the Japan Society for Fuzzy Theory and Systems, and the Microelectronics and Computer Technology Corporation (MCC). The fuzzy set theory has led to a large number of diverse applications. Recently, interesting applications have been developed which involve the integration of fuzzy systems with adaptive processes such a neural networks and genetic algorithms. NAFIPS '92 was directed toward the advancement, commercialization, and engineering development of these technologies

Design of Thermal Management Control Policies for Multiprocessors Systems on Chip

The contribution of this thesis is a thorough study of thermal aware policy design for MPSoCs. The study includes the modelling of their thermal behavior as well as the improvement and the definition of new thermal management and balancing policies. The work is structured on three main specific disciplines. The areas of contributions are: modeling, algorithms and system design. This thesis extends the field of modeling by proposing new techniques to represent the thermal behavior of MPSoCs using a mathematical formalization. Heat transfer and modelling of physical properties of MPSoCs have been extensively studied. Special emphasis is given to the way the system cools down (i.e. micro-cooling, natural heat dissipation etc.) and the heat propagates inside the MPSoC. The second contribution of this work is related to policies, which manage MPSoC working frequencies and micro-cooling pumps to satisfy user requirements in the most effective possible way, while consuming the lowest possible amount of resources. Several families of thermal policies algorithms have been studied and analyzed in this work for both 2D and 3D MPSoCs including liquid cooling technologies. The discipline of system design has also been extended during the development of this thesis. Thermal management policies have been implemented in real emulation platforms and contributions in this area are related to the design and implementation of proposed innovations in real MPSoC platforms

Proceedings of the Third International Workshop on Neural Networks and Fuzzy Logic, volume 1

Documented here are papers presented at the Neural Networks and Fuzzy Logic Workshop sponsored by the National Aeronautics and Space Administration and cosponsored by the University of Houston, Clear Lake. The workshop was held June 1-3, 1992 at the Lyndon B. Johnson Space Center in Houston, Texas. During the three days approximately 50 papers were presented. Technical topics addressed included adaptive systems; learning algorithms; network architectures; vision; robotics; neurobiological connections; speech recognition and synthesis; fuzzy set theory and application, control, and dynamics processing; space applications; fuzzy logic and neural network computers; approximate reasoning; and multiobject decision making