On The Engineering of a Stable Force-Directed Placer

Analytic and force-directed placement methods that simultaneously minimize wire length and spread cells are receiving renewed attention from both academia and industry. However, these methods are by no means trivial to implement---to date, published works have failed to provide sufficient engineering details to replicate results. This dissertation addresses the implementation of a generic force-directed placer entitled FDP. Specifically, this thesis provides (1) a description of efficient force computation for spreading cells, (2) an illustration of numerical instability in this method and a means to avoid the instability, (3) metrics for measuring cell distribution throughout the placement area, and (4) a complementary technique that aids in minimizing wire length. FDP is compared to Kraftwerk and other leading academic tools including Capo, Dragon, and mPG for both standard cell and mixed-size circuits. Wire lengths produced by FDP are found to be, on average, up to 9% and 3% better than Kraftwerk and Capo, respectively. All told, this thesis confirms the validity and applicability of the approach, and provides clarifying details of the intricacies surrounding the implementation of a force-directed global placer

Automatic synthesis of analog layout : a survey

A review of recent research in the automatic synthesis of physical geometry for analog integrated circuits is presented. On introduction, an explanation of the difficulties involved in analog layout as opposed to digital layout is covered. Review of the literature then follows. Emphasis is placed on the exposition of general methods for addressing problems specific to analog layout, with the details of specific systems only being given when they surve to illustrate these methods well. The conclusion discusses problems remaining and offers a prediction as to how technology will evolve to solve them. It is argued that although progress has been and will continue to be made in the automation of analog IC layout, due to fundamental differences in the nature of analog IC design as opposed to digital design, it should not be expected that the level of automation of the former will reach that of the latter any time soon

On the Use of Directed Moves for Placement in VLSI CAD

Search-based placement methods have long been used for placing integrated circuits targeting the field programmable gate array (FPGA) and standard cell design styles. Such methods offer the potential for high-quality solutions but often come at the cost of long run-times compared to alternative methods. This dissertation examines strategies for enhancing local search heuristics---and in particular, simulated annealing---through the application of directed moves. These moves help to guide a search-based optimizer by focusing efforts on states which are most likely to yield productive improvement, effectively pruning the size of the search space. The engineering theory and implementation details of directed moves are discussed in the context of both field programmable gate array and standard cell designs. This work explores the ways in which such moves can be used to improve the quality of FPGA placements, improve the robustness of floorplan repair and legalization methods for mixed-size standard cell designs, and enhance the quality of detailed placement for standard cell circuits. The analysis presented herein confirms the validity and efficacy of directed moves, and supports the use of such heuristics within various optimization frameworks

Layer assignment and routing optimization for advanced technologies

As VLSI technology scales to deep sub-micron and beyond, it becomes increasingly challenging to achieve timing closure for VLSI design. Since a complete design flow consists of several phases, such as logic synthesis, placement, and routing, interconnect synthesis plays an important role which includes buffer insertion/sizing and timing-driven routing. Although progress has been achieved by many advanced routing techniques, the following aspects can be exploited sufficiently for further improvement: (1) incremental layer assignment for timing optimization; (2) signal routing with the requirement of regularity; (3) power-efficient optical-electrical interconnect paradigm. Thus, to perform the layer assignment and routing optimization for advanced technologies, an automated routing engine in a global view is essential to benefit the interconnect design while satisfying specific requirements. This dissertation proposes a set of algorithms and methodology on layer assignment and routing optimization for advanced technologies. The research includes two timing-driven incremental layer assignment approaches, synergistic topology generation and routing synthesis for signal groups, and optical-electrical routing design for power efficiency. For incremental layer assignment, most of the conventional approaches target via minimization but neglect the timing issues. Meanwhile, via delays are ignored but should be considered in emerging technology nodes. Then two timing-driven incremental layer assignment frameworks are proposed, where all the nets are solved simultaneously with the integration of via delays: (1) optimization of the total sum of net delays and reduction of slew violations; (2) minimization of critical path timing in selected nets. For on-chip signal routing, the bundled bits in one group may have different pin locations, but they have to be routed in a regular manner by sharing common topologies. Very few previous works target inter-bit regularity via multi-layer topology selection. Furthermore, the routability and wire-length of the signal bits should also be optimized. Then an advanced synergistic routing engine is promoted, which is able to not only control routability and wire-length but also guide each bit routing intelligently for design regularity. For optical-electrical co-design routing, optical interconnect shows its advantage due to the dominance of bandwidth-distance-power properties. The previous works lack a detailed exploration of optical-electrical co-design for on-chip interconnects. During the transmission, signal quality can be affected by various loss sources and Electrical to Optical (EO)/Optical to Electrical (OE) conversion overheads should also be considered. Then a power-efficient routing flow for on-chip signals is presented, where optical connections can collaborate with electrical wires seamlessly. The effectiveness of proposed algorithms and techniques is demonstrated in this dissertation. These approaches are able to achieve the improvements regarding specific metrics and eventually benefit the routing flow.Electrical and Computer Engineerin

A design flow for performance planning : new paradigms for iteration free synthesis

In conventional design, higher levels of synthesis produce a netlist, from which layout synthesis builds a mask specification for manufacturing. Timing anal ysis is built into a feedback loop to detect timing violations which are then used to update specifications to synthesis. Such iteration is undesirable, and for very high performance designs, infeasible. The problem is likely to become much worse with future generations of technology. To achieve a non-iterative design flow, early synthesis stages should use wire planning to distribute delays over the functional elements and interconnect, and layout synthesis should use its degrees of freedom to realize those delays

NASA SERC 1990 Symposium on VLSI Design

This document contains papers presented at the first annual NASA Symposium on VLSI Design. NASA's involvement in this event demonstrates a need for research and development in high performance computing. High performance computing addresses problems faced by the scientific and industrial communities. High performance computing is needed in: (1) real-time manipulation of large data sets; (2) advanced systems control of spacecraft; (3) digital data transmission, error correction, and image compression; and (4) expert system control of spacecraft. Clearly, a valuable technology in meeting these needs is Very Large Scale Integration (VLSI). This conference addresses the following issues in VLSI design: (1) system architectures; (2) electronics; (3) algorithms; and (4) CAD tools

Timing Closure in Chip Design

Achieving timing closure is a major challenge to the physical design of a computer chip. Its task is to find a physical realization fulfilling the speed specifications. In this thesis, we propose new algorithms for the key tasks of performance optimization, namely repeater tree construction; circuit sizing; clock skew scheduling; threshold voltage optimization and plane assignment. Furthermore, a new program flow for timing closure is developed that integrates these algorithms with placement and clocktree construction. For repeater tree construction a new algorithm for computing topologies, which are later filled with repeaters, is presented. To this end, we propose a new delay model for topologies that not only accounts for the path lengths, as existing approaches do, but also for the number of bifurcations on a path, which introduce extra capacitance and thereby delay. In the extreme cases of pure power optimization and pure delay optimization the optimum topologies regarding our delay model are minimum Steiner trees and alphabetic code trees with the shortest possible path lengths. We presented a new, extremely fast algorithm that scales seamlessly between the two opposite objectives. For special cases, we prove the optimality of our algorithm. The efficiency and effectiveness in practice is demonstrated by comprehensive experimental results. The task of circuit sizing is to assign millions of small elementary logic circuits to elements from a discrete set of logically equivalent, predefined physical layouts such that power consumption is minimized and all signal paths are sufficiently fast. In this thesis we develop a fast heuristic approach for global circuit sizing, followed by a local search into a local optimum. Our algorithms use, in contrast to existing approaches, the available discrete layout choices and accurate delay models with slew propagation. The global approach iteratively assigns slew targets to all source pins of the chip and chooses a discrete layout of minimum size preserving the slew targets. In comprehensive experiments on real instances, we demonstrate that the worst path delay is within 7% of its lower bound on average after a few iterations. The subsequent local search reduces this gap to 2% on average. Combining global and local sizing we are able to size more than 5.7 million circuits within 3 hours. For the clock skew scheduling problem we develop the first algorithm with a strongly polynomial running time for the cycle time minimization in the presence of different cycle times and multi-cycle paths. In practice, an iterative local search method is much more efficient. We prove that this iterative method maximizes the worst slack, even when restricting the feasible schedule to certain time intervals. Furthermore, we enhance the iterative local approach to determine a lexicographically optimum slack distribution. The clock skew scheduling problem is then generalized to allow for simultaneous data path optimization. In fact, this is a time-cost tradeoff problem. We developed the first combinatorial algorithm for computing time-cost tradeoff curves in graphs that may contain cycles. Starting from the lowest-cost solution, the algorithm iteratively computes a descent direction by a minimum cost flow computation. The maximum feasible step length is then determined by a minimum ratio cycle computation. This approach can be used in chip design for several optimization tasks, e.g. threshold voltage optimization or plane assignment. Finally, the optimization routines are combined into a timing closure flow. Here, the global placement is alternated with global performance optimization. Netweights are used to penalize the length of critical nets during placement. After the global phase, the performance is improved further by applying more comprehensive optimization routines on the most critical paths. In the end, the clock schedule is optimized and clocktrees are inserted. Computational results of the design flow are obtained on real-world computer chips