GSM Based Health Assistant for People with Chronic Diseases

A GSM based health assistant for people with chronic diseases proposes and implements a prototype to help people with chronic diseases. The system is composed of two components namely, wearable body area network and a microprocessor unit with GSM and GPS. This project can track certain chronic diseases namely, heart problems, asthma, apart from the chronic diseases can also track blood pressure with sensors namely, electrocardiogram (ECG) sensor, temperature sensor, heart beatsensor and blood pressure sensor. This project keeps track of the readings from the sensors and if there are some abnormalities it would send messages via GSM stored in SIM.The location of the patient can be sent using GPS

Low Power Circuits for Smart Flexible ECG Sensors

Cardiovascular diseases (CVDs) are the world leading cause of death. In-home heart condition monitoring effectively reduced the CVD patient hospitalization rate. Flexible electrocardiogram (ECG) sensor provides an affordable, convenient and comfortable in-home monitoring solution. The three critical building blocks of the ECG sensor i.e., analog frontend (AFE), QRS detector, and cardiac arrhythmia classifier (CAC), are studied in this research. A fully differential difference amplifier (FDDA) based AFE that employs DC-coupled input stage increases the input impedance and improves CMRR. A parasitic capacitor reuse technique is proposed to improve the noise/area efficiency and CMRR. An on-body DC bias scheme is introduced to deal with the input DC offset. Implemented in 0.35m CMOS process with an area of 0.405mm2, the proposed AFE consumes 0.9W at 1.8V and shows excellent noise effective factor of 2.55, and CMRR of 76dB. Experiment shows the proposed AFE not only picks up clean ECG signal with electrodes placed as close as 2cm under both resting and walking conditions, but also obtains the distinct -wave after eye blink from EEG recording. A personalized QRS detection algorithm is proposed to achieve an average positive prediction rate of 99.39% and sensitivity rate of 99.21%. The user-specific template avoids the complicate models and parameters used in existing algorithms while covers most situations for practical applications. The detection is based on the comparison of the correlation coefficient of the user-specific template with the ECG segment under detection. The proposed one-target clustering reduced the required loops. A continuous-in-time discrete-in-amplitude (CTDA) artificial neural network (ANN) based CAC is proposed for the smart ECG sensor. The proposed CAC achieves over 98% classification accuracy for 4 types of beats defined by AAMI (Association for the Advancement of Medical Instrumentation). The CTDA scheme significantly reduces the input sample numbers and simplifies the sample representation to one bit. Thus, the number of arithmetic operations and the ANN structure are greatly simplified. The proposed CAC is verified by FPGA and implemented in 0.18m CMOS process. Simulation results show it can operate at clock frequencies from 10KHz to 50MHz. Average power for the patient with 75bpm heart rate is 13.34W

HEAL-WEAR: an Ultra-Low Power Heterogeneous System for Bio-Signal Analysis

Personalized healthcare devices enable low-cost, unobtrusive and long-term acquisition of clinically-relevant biosignals. These appliances, termed Wireless Body Sensor Nodes (WBSNs), are fostering a revolution in health monitoring for patients affected by chronic ailments. Nowadays, WBSNs often embed complex digital processing routines, which must be performed within an extremely tight energy budget. Addressing this challenge, in this paper we introduce a novel computing architecture devoted to the ultra-low power analysis of biosignals. Its heterogeneous structure comprises multiple processors interfaced with a shared acceleration resource, implemented as a Coarse Grained Reconfigurable Array (CGRA). The CGRA mesh effectively supports the execution of the intensive loops that characterize bio-signal analysis applications, while requiring a low reconfiguration overhead. Moreover, both the processors and the reconfigurable fabric feature Single-Instruction / Multiple- Data (SIMD) execution modes, which increase efficiency when multiple data streams are concurrently processed. The run-time behavior on the system is orchestrated by a light-weight hardware mechanism, which concurrently synchronizes processors for SIMD execution and regulates access to the reconfigurable accelerator. By jointly leveraging run-time reconfiguration and SIMD execution, the illustrated heterogeneous system achieves, when executing complex bio-signal analysis applications, speedups of up to 11.3x on the considered kernels and up to 37.2% overall energy savings, with respect to an ultra-low power multicore platform which does not feature CGRA acceleration

ULTRALOW-POWER, LOW-VOLTAGE DIGITAL CIRCUITS FOR BIOMEDICAL SENSOR NODES

Ph.DDOCTOR OF PHILOSOPH

Parallel Architectures for Many-Core Systems-On-Chip in Deep Sub-Micron Technology

Despite the several issues faced in the past, the evolutionary trend of silicon has kept its constant pace. Today an ever increasing number of cores is integrated onto the same die. Unfortunately, the extraordinary performance achievable by the many-core paradigm is limited by several factors. Memory bandwidth limitation, combined with inefficient synchronization mechanisms, can severely overcome the potential computation capabilities. Moreover, the huge HW/SW design space requires accurate and flexible tools to perform architectural explorations and validation of design choices. In this thesis we focus on the aforementioned aspects: a flexible and accurate Virtual Platform has been developed, targeting a reference many-core architecture. Such tool has been used to perform architectural explorations, focusing on instruction caching architecture and hybrid HW/SW synchronization mechanism. Beside architectural implications, another issue of embedded systems is considered: energy efficiency. Near Threshold Computing is a key research area in the Ultra-Low-Power domain, as it promises a tenfold improvement in energy efficiency compared to super-threshold operation and it mitigates thermal bottlenecks. The physical implications of modern deep sub-micron technology are severely limiting performance and reliability of modern designs. Reliability becomes a major obstacle when operating in NTC, especially memory operation becomes unreliable and can compromise system correctness. In the present work a novel hybrid memory architecture is devised to overcome reliability issues and at the same time improve energy efficiency by means of aggressive voltage scaling when allowed by workload requirements. Variability is another great drawback of near-threshold operation. The greatly increased sensitivity to threshold voltage variations in today a major concern for electronic devices. We introduce a variation-tolerant extension of the baseline many-core architecture. By means of micro-architectural knobs and a lightweight runtime control unit, the baseline architecture becomes dynamically tolerant to variations

Hardware / Software Architectural and Technological Exploration for Energy-Efficient and Reliable Biomedical Devices

Nowadays, the ubiquity of smart appliances in our everyday lives is increasingly strengthening the links between humans and machines. Beyond making our lives easier and more convenient, smart devices are now playing an important role in personalized healthcare delivery. This technological breakthrough is particularly relevant in a world where population aging and unhealthy habits have made non-communicable diseases the first leading cause of death worldwide according to international public health organizations. In this context, smart health monitoring systems termed Wireless Body Sensor Nodes (WBSNs), represent a paradigm shift in the healthcare landscape by greatly lowering the cost of long-term monitoring of chronic diseases, as well as improving patients' lifestyles. WBSNs are able to autonomously acquire biological signals and embed on-node Digital Signal Processing (DSP) capabilities to deliver clinically-accurate health diagnoses in real-time, even outside of a hospital environment. Energy efficiency and reliability are fundamental requirements for WBSNs, since they must operate for extended periods of time, while relying on compact batteries. These constraints, in turn, impose carefully designed hardware and software architectures for hosting the execution of complex biomedical applications. In this thesis, I develop and explore novel solutions at the architectural and technological level of the integrated circuit design domain, to enhance the energy efficiency and reliability of current WBSNs. Firstly, following a top-down approach driven by the characteristics of biomedical algorithms, I perform an architectural exploration of a heterogeneous and reconfigurable computing platform devoted to bio-signal analysis. By interfacing a shared Coarse-Grained Reconfigurable Array (CGRA) accelerator, this domain-specific platform can achieve higher performance and energy savings, beyond the capabilities offered by a baseline multi-processor system. More precisely, I propose three CGRA architectures, each contributing differently to the maximization of the application parallelization. The proposed Single, Multi and Interleaved-Datapath CGRA designs allow the developed platform to achieve substantial energy savings of up to 37%, when executing complex biomedical applications, with respect to a multi-core-only platform. Secondly, I investigate how the modeling of technology reliability issues in logic and memory components can be exploited to adequately adjust the frequency and supply voltage of a circuit, with the aim of optimizing its computing performance and energy efficiency. To this end, I propose a novel framework for workload-dependent Bias Temperature Instability (BTI) impact analysis on biomedical application results quality. Remarkably, the framework is able to determine the range of safe circuit operating frequencies without introducing worst-case guard bands. Experiments highlight the possibility to safely raise the frequency up to 101% above the maximum obtained with the classical static timing analysis. Finally, through the study of several well-known biomedical algorithms, I propose an approach allowing energy savings by dynamically and unequally protecting an under-powered data memory in a new way compared to regular error protection schemes. This solution relies on the Dynamic eRror compEnsation And Masking (DREAM) technique that reduces by approximately 21% the energy consumed by traditional error correction codes

A Construction Kit for Efficient Low Power Neural Network Accelerator Designs

Implementing embedded neural network processing at the edge requires efficient hardware acceleration that couples high computational performance with low power consumption. Driven by the rapid evolution of network architectures and their algorithmic features, accelerator designs are constantly updated and improved. To evaluate and compare hardware design choices, designers can refer to a myriad of accelerator implementations in the literature. Surveys provide an overview of these works but are often limited to system-level and benchmark-specific performance metrics, making it difficult to quantitatively compare the individual effect of each utilized optimization technique. This complicates the evaluation of optimizations for new accelerator designs, slowing-down the research progress. This work provides a survey of neural network accelerator optimization approaches that have been used in recent works and reports their individual effects on edge processing performance. It presents the list of optimizations and their quantitative effects as a construction kit, allowing to assess the design choices for each building block separately. Reported optimizations range from up to 10'000x memory savings to 33x energy reductions, providing chip designers an overview of design choices for implementing efficient low power neural network accelerators

Ultra Low-power Wireless Sensor Node Design for ECG Sensing Applications

Ubiquitous computing, such as smart homes, smart cars, and smart grid, connects our world closely so that we can easily access to the world through such virtual infrastructural systems. The ultimate vision of this is Internet of Things (IoT) through which intelligent monitoring and management is feasible via networked sensors and actuators. In this system, devices transmit sensed information, and execute instructions distributed via sensor networks. A wireless sensor network (WSN) is such a network where many sensor nodes are interconnected such that a sensor node can transmit information via its adjacent sensor nodes when physical phenomenon is detected. Accordingly, the information can be delivered to the destination through this process. The concept of WSN is also applicable to biomedical applications, especially ECG sensing applications, in a form of a sensor network, so-called body sensor network (BSN), where affixed or implanted biosignal sensors gather bio-signals and transmit them to medical providers. The main challenge of BSN is energy constraint since implanted sensor nodes cannot be replaced easily, so they should prolong with a limited amount of battery energy or by energy harvesting. Thus, we will discuss several power saving techniques in this thesis.PHDElectrical EngineeringUniversity of Michigan, Horace H. Rackham School of Graduate Studieshttps://deepblue.lib.umich.edu/bitstream/2027.42/137081/1/hesed_1.pd

Design of robust ultra-low power platform for in-silicon machine learning

The rapid development of machine learning plays a key role in enabling next generation computing systems with enhanced intelligence. Present day machine learning systems adopt an "intelligence in the cloud" paradigm, resulting in heavy energy cost despite state-of-the-art performance. It is therefore of great interest to design embedded ultra-low power (ULP) platforms with in-silicon machine learning capability. A self-contained ULP platform consists of the energy delivery, sensing and information processing subsystems. This dissertation proposes techniques to design and optimize the ULP platform for in-silicon machine learning by exploring a trade-off that exists between energy-efficiency and robustness. This trade-off arises when the information processing functionality is integrated into the energy delivery, sensing, or emerging stochastic fabrics (e.g., CMOS operating in near-threshold voltage or voltage overscaling, and beyond CMOS devices). This dissertation presents the Compute VRM (C-VRM) to embed the information processing into the energy delivery subsystem. The C-VRM employs multiple voltage domain stacking and core swapping to achieve high total system energy efficiency in near/sub-threshold region. A prototype IC of the C-VRM is implemented in a 1.2 V, 130 nm CMOS process. Measured results indicate that the C-VRM has up to 44.8% savings in system-level energy per operation compared to the conventional system, and an efficiency ranging from 79% to 83% over an output voltage range of 0.52 V to 0.6 V. This dissertation further proposes the Compute Sensor approach to embed information processing into the sensing subsystem. The Compute Sensor eliminates both the traditional sensor-processor interface, and the high-SNR/high-energy digital processing by moving feature extraction and classification functions into the analog domain. Simulation results in 65 nm CMOS show that the proposed Compute Sensor can achieve a detection accuracy greater than 94.7% using the Caltech101 dataset, which is within 0.5% of that achieved by an ideal digital implementation. The performance is achieved with 7x to 17x lower energy than the conventional architecture for the same level of accuracy. To further explore the energy-efficiency vs. robustness trade-off, this dissertation explores the use of highly energy efficient but unreliable stochastic fabrics to implement in-silicon machine learning kernels. In order to perform reliable computation on the stochastic fabrics, this dissertation proposes to employ statistical error compensation (SEC) as an effective error compensation technique. This dissertation makes a contribution to the portfolio of SEC by proposing embedded algorithmic noise tolerance (E-ANT) for low overhead error compensation. E-ANT operates by reusing part of the main block as estimator and thus embedding the estimator into the main block. System level simulation results in a commercial 45 nm CMOS process show that E-ANT achieves up to 38% error tolerance and up to 51% energy savings compared with an uncompensated system. This dissertation makes a contribution to the theoretical understanding of stochastic fabrics by proposing a class of probabilistic error models that can accurately model the hardware errors on the stochastic fabrics. The models are validated in a commercial 45 nm CMOS process and employed to evaluate the performance of machine learning kernels in the presence of hardware errors. Performance prediction of a support vector machine (SVM) based classifier using these models indicates that the probability of detection P_{det} estimated using the proposed model is within 3% for timing errors due to voltage overscaling when the error rate p_η ≤ 80%, within 5% for timing errors due to process variation in near threshold-voltage (NTV) region (0.3 V-0.7 V) and within 2% for defect errors when the defect rate p_{saf} is between 10^{-3} and 20%, compared with HDL simulation results. Employing the proposed error model and evaluation methodology, this dissertation explores the use of distributed machine learning architectures, named classifier ensemble, to enhance the robustness of in-silicon machine learning kernels. Comparative study of distributed architectures (i.e., random forest (RF)) and centralized architectures (i.e., SVM) is performed in a commercial 45 nm CMOS process. Employing the UCI machine learning repository as input, it is determined that RF-based architectures are significantly more robust than SVM architectures in presence of timing errors in the NTV region (0.3 V- 0.7 V). Additionally, an error weighted voting technique that incorporates the timing error statistics of the NTV circuit fabric is proposed to further enhance the robustness of RF architectures. Simulation results confirm that the error weighted voting technique achieves a P_{det} that varies by only 1.4%, which is 12x lower compared to centralized architectures

Near-field baseband communication system for use in biomedical implants

This thesis introduces the reader to the near-field baseband pulse radio communication for biomedical implants. It details the design and implementation of the complete communication system with a particular emphasis on the antenna structure and waveform coding that is compatible with this particular technology. The wireless communication system has great employability in small pill-sized biomedical diagnostic devices offering the advantages of low power consumption and easy integration with SoC and lab-in-a-pill technologies. The greatest challenge was the choice of antenna that had to be made to effectively transmit the pulses. A systematic approach has been carried out in arriving at the most suitable antenna for efficient emanation of pulses and the fields around it are analysed electromagnetically using a commercially available software. A magnetic antenna can be used to transmit the information from inside a human body to the outside world. The performance of the above antenna was evaluated in a salt solution of different concentrations which is similar to a highly conductive lossy medium like a human body. Near-field baseband pulse transmission is a waveform transmission scheme wherein the pulse shape is crucial for decoding information at the receiver. This demands a new approach to the antenna design, both at the transmitter and the receiver. The antenna had to be analysed in the time-domain to know its effects on the pulse and an expression for the antenna bandwidth has been proposed in this thesis. The receiving antenna should be able to detect very short pulses and while doing so has to also maintain the pulse shape with minimal distortion. Different loading congurations were explored to determine the most feasible one for receiving very short pulses. Return-to-zero (RZ), Non-return-zero (NRZ) and Manchester coded pulse waveforms were tested for their compatibility and performance with the near-field baseband pulse radio communication. It was concluded that Manchester coded waveform are perfectly suited for this particular near-field communication technology. Pulse interval modulation was also investigated and the findings suggested that it was easier to implement and had a high throughput rate too. A simple receiver algorithm has been suggested and practically tested on a digital signal processor. There is further scope for research to develop complex signal processing algorithms at the receiver