ANALYSIS OF UNCERTAINTY IN UNDERWATER MULTIVIEW RECONSTRUCTION

Multiview reconstruction, a method for creating 3D models from multiple images from different views, has been a popular topic of research in the eld of computer vision in the last two decades. Increased availability of high-quality cameras led to the development of advanced techniques and algorithms. However, little attention has been paid to multiview reconstruction in underwater conditions. Researchers in a wide variety of elds (e.g. marine biology, archaeology, and geology) could benefit from having 3D models of seafloor and underwater objects. Cameras, designed to operate in air, must be put in protective housings to work underwater. This affects the image formation process. The largest source of underwater image distortion results from refraction of light, which occurs when light rays travel through boundaries between media with different refractive indices. This study addresses methods for accounting for light refraction when using a static rig with multiple cameras. We define a set of procedures to achieve optimal underwater reconstruction results, and we analyze the expected quality of the 3D models\u27 measurements

Geometrically-driven underground camera modeling and calibration with coplanarity constraints for Boom-type roadheader

The conventional calibration methods based on perspective camera model are not suitable for underground camera with two-layer glasses, which is specially designed for explosion-proof and dust removal in coal mine. The underground camera modeling and calibration algorithms are urgently needed to improve the precision and reliability of underground visual measurement system. This paper presents a novel geometrically-driven underground camera calibration algorithm for Boom-type roadheader. The underground camera model is established under coplanarity constraints, considering explicitly the impact of refraction triggered by the two-layer glasses and deriving the geometrical relationship of equivalent collinearity equations. On this basis, we perform parameters calibration based on a geometrically-driven calibration model, which is a 2D-2D correspondences between the image points and object coordinates of the plannar target. A hybrid LM-PSO algorithm is further proposed in terms of the dynamic combination of the Levenberg-Marqurdt (LM) and Particle Swarm Optimization (PSO), which optimize the underground camera calibration results by minimizing the error of the nonlinear underground camera model. The experiment results demonstrate that the pose errors caused by the two-layer glass refraction are well corrected by the proposed method. The accuracy of the cutting-head pose estimation has increased by 55.73%, meeting the requirements of underground excavations

A virtual object point model for the calibration of underwater stereo cameras to recover accurate 3D information

The focus of this thesis is on recovering accurate 3D information from underwater images. Underwater 3D reconstruction differs significantly from 3D reconstruction in air due to the refraction of light. In this thesis, the concepts of stereo 3D reconstruction in air get extended for underwater environments by an explicit consideration of refractive effects with the aid of a virtual object point model. Within underwater stereo 3D reconstruction, the focus of this thesis is on the refractive calibration of underwater stereo cameras

Refractive Geometry for Underwater Domes

Underwater cameras are typically placed behind glass windows to protect them from the water. Spherical glass, a dome port, is well suited for high water pressures at great depth, allows for a large field of view, and avoids refraction if a pinhole camera is positioned exactly at the sphere’s center. Adjusting a real lens perfectly to the dome center is a challenging task, both in terms of how to actually guide the centering process (e.g. visual servoing) and how to measure the alignment quality, but also, how to mechanically perform the alignment. Consequently, such systems are prone to being decentered by some offset, leading to challenging refraction patterns at the sphere that invalidate the pinhole camera model. We show that the overall camera system becomes an axial camera, even for thick domes as used for deep sea exploration and provide a non-iterative way to compute the center of refraction without requiring knowledge of exact air, glass or water properties. We also analyze the refractive geometry at the sphere, looking at effects such as forward- vs. backward decentering, iso-refraction curves and obtain a 6th-degree polynomial equation for forward projection of 3D points in thin domes. We then propose a pure underwater calibration procedure to estimate the decentering from multiple images. This estimate can either be used during adjustment to guide the mechanical position of the lens, or can be considered in photogrammetric underwater applications

Refractive Geometry for Underwater Domes

Underwater cameras are typically placed behind glass windows to protect them from the water. Spherical glass, a dome port, is well suited for high water pressures at great depth, allows for a large field of view, and avoids refraction if a pinhole camera is positioned exactly at the sphere’s center. Adjusting a real lens perfectly to the dome center is a challenging task, both in terms of how to actually guide the centering process (e.g. visual servoing) and how to measure the alignment quality, but also, how to mechanically perform the alignment. Consequently, such systems are prone to being decentered by some offset, leading to challenging refraction patterns at the sphere that invalidate the pinhole camera model. We show that the overall camera system becomes an axial camera, even for thick domes as used for deep sea exploration and provide a non-iterative way to compute the center of refraction without requiring knowledge of exact air, glass or water properties. We also analyze the refractive geometry at the sphere, looking at effects such as forward- vs. backward decentering, iso-refraction curves and obtain a 6th-degree polynomial equation for forward projection of 3D points in thin domes. We then propose a pure underwater calibration procedure to estimate the decentering from multiple images. This estimate can either be used during adjustment to guide the mechanical position of the lens, or can be considered in photogrammetric underwater applications

Computational Imaging for Shape Understanding

Geometry is the essential property of real-world scenes. Understanding the shape of the object is critical to many computer vision applications. In this dissertation, we explore using computational imaging approaches to recover the geometry of real-world scenes. Computational imaging is an emerging technique that uses the co-designs of image hardware and computational software to expand the capacity of traditional cameras. To tackle face recognition in the uncontrolled environment, we study 2D color image and 3D shape to deal with body movement and self-occlusion. Especially, we use multiple RGB-D cameras to fuse the varying pose and register the front face in a unified coordinate system. The deep color feature and geodesic distance feature have been used to complete face recognition. To handle the underwater image application, we study the angular-spatial encoding and polarization state encoding of light rays using computational imaging devices. Specifically, we use the light field camera to tackle the challenging problem of underwater 3D reconstruction. We leverage the angular sampling of the light field for robust depth estimation. We also develop a fast ray marching algorithm to improve the efficiency of the algorithm. To deal with arbitrary reflectance, we investigate polarimetric imaging and develop polarimetric Helmholtz stereopsis that uses reciprocal polarimetric image pairs for high-fidelity 3D surface reconstruction. We formulate new reciprocity and diffuse/specular polarimetric constraints to recover surface depths and normals using an optimization framework. To recover the 3D shape in the unknown and uncontrolled natural illumination, we use two circularly polarized spotlights to boost the polarization cues corrupted by the environment lighting, as well as to provide photometric cues. To mitigate the effect of uncontrolled environment light in photometric constraints, we estimate a lighting proxy map and iteratively refine the normal and lighting estimation. Through expensive experiments on the simulated and real images, we demonstrate that our proposed computational imaging methods outperform traditional imaging approaches

Refractive Structure-From-Motion Through a Flat Refractive Interface

Recovering 3D scene geometry from underwater images involves the Refractive Structure-from-Motion (RSfM) problem, where the image distortions caused by light refraction at the interface between different propagation media invalidates the single view point assumption. Direct use of the pinhole camera model in RSfM leads to inaccurate camera pose estimation and consequently drift. RSfM methods have been thoroughly studied for the case of a thick glass interface that assumes two refractive interfaces between the camera and the viewed scene. On the other hand, when the camera lens is in direct contact with the water, there is only one refractive interface. By explicitly considering a refractive interface, we develop a succinct derivation of the refractive fundamental matrix in the form of the generalised epipolar constraint for an axial camera. We use the refractive fundamental matrix to refine initial pose estimates obtained by assuming the pinhole model. This strategy allows us to robustly estimate underwater camera poses, where other methods suffer from poor noise-sensitivity. We also formulate a new four view constraint enforcing camera pose consistency along a video which leads us to a novel RSfM framework. For validation we use synthetic data to show the numerical properties of our method and we provide results on real data to demonstrate performance within laboratory settings and for applications in endoscopy