443 research outputs found
Recent advances in plasmonic sensor-based fiber optic probes for biological applications
Funding: This research was funded by National Natural Science Foundation of China (NSFC), grant number [61675008]. Acknowledgments: KN wishes to thank The Royal Society Kan Tong Po International Fellowship 2018 for the travel fund to visit Hong Kong Polytechnic University and Shenzhen Science and Technology Innovation Commission (Project GJHZ20180411185015272).Peer reviewedPublisher PD
Optical fiber sensors and sensing networks: overview of the main principles and applications
Optical fiber sensors present several advantages in relation to other types of sensors. These advantages are essentially related to the optical fiber properties, i.e., small, lightweight, resistant to high temperatures and pressure, electromagnetically passive, among others. Sensing is achieved by exploring the properties of light to obtain measurements of parameters, such as temperature, strain, or angular velocity. In addition, optical fiber sensors can be used to form an Optical Fiber Sensing Network (OFSN) allowing manufacturers to create versatile monitoring solutions with several applications, e.g., periodic monitoring along extensive distances (kilometers), in extreme or hazardous environments, inside structures and engines, in clothes, and for health monitoring and assistance. Most of the literature available on this subject focuses on a specific field of optical sensing applications and details their principles of operation. This paper presents a more broad overview, providing the reader with a literature review that describes the main principles of optical sensing and highlights the versatility, advantages, and different real-world applications of optical sensing. Moreover, it includes an overview and discussion of a less common architecture, where optical sensing and Wireless Sensor Networks (WSNs) are integrated to harness the benefits of both worlds.This work was supported by FCT—Fundação para a Ciência e Tecnologia within the R&D Units Project Scope: UIDB/00319/2020
Ultra small integrated optical fiber sensing system
This paper introduces a revolutionary way to interrogate optical fiber sensors based on fiber Bragg gratings (FBGs) and to integrate the necessary driving optoelectronic components with the sensor elements. Low-cost optoelectronic chips are used to interrogate the optical fibers, creating a portable dynamic sensing system as an alternative for the traditionally bulky and expensive fiber sensor interrogation units. The possibility to embed these laser and detector chips is demonstrated resulting in an ultra thin flexible optoelectronic package of only 40 µm, provided with an integrated planar fiber pigtail. The result is a fully embedded flexible sensing system with a thickness of only 1 mm, based on a single Vertical-Cavity Surface-Emitting Laser (VCSEL), fiber sensor and photodetector chip. Temperature, strain and electrodynamic shaking tests have been performed on our system, not limited to static read-out measurements but dynamically reconstructing full spectral information datasets
Recommended from our members
Miniaturization of optical spectrometers
Spectroscopic analysis is one of the most widely used analytical tools across both scientific research and industry. Whilst laboratory bench-top spectrometer systems offer superlative resolution and spectral range, their miniaturization is crucial for applications where portability is paramount, or in-situ measurements must be made. Advancement in this field over the last three decades is now yielding microspectrometers with performance and footprint near those viable for lab-on-a-chip systems, smartphones and other consumer technologies. In this review, we briefly summarize the technologies that have emerged toward achieving these aims - including miniaturized dispersive optics, narrowband filter systems, Fourier transform interferometers and reconstructive microspectrometers - and discuss the challenges associated with improving spectral resolution while device dimensions shrink ever further.EPSRC: EP/L016087/1
National Natural Science Foundation of China (51706141, 51976122
Intelligent smartphone-based multimode imaging otoscope for the mobile diagnosis of otitis media
Otitis media (OM) is one of the most common ear diseases in children and a common reason for outpatient visits to medical doctors in primary care practices. Adhesive OM (AdOM) is recognized as a sequela of OM with effusion (OME) and often requires surgical intervention. OME and AdOM exhibit similar symptoms, and it is difficult to distinguish between them using a conventional otoscope in a primary care unit. The accuracy of the diagnosis is highly dependent on the experience of the examiner. The development of an advanced otoscope with less variation in diagnostic accuracy by the examiner is crucial for a more accurate diagnosis. Thus, we developed an intelligent smartphone-based multimode imaging otoscope for better diagnosis of OM, even in mobile environments. The system offers spectral and autofluorescence imaging of the tympanic membrane using a smartphone attached to the developed multimode imaging module. Moreover, it is capable of intelligent analysis for distinguishing between normal, OME, and AdOM ears using a machine learning algorithm. Using the developed system, we examined the ears of 69 patients to assess their performance for distinguishing between normal, OME, and AdOM ears. In the classification of ear diseases, the multimode system based on machine learning analysis performed better in terms of accuracy and F1 scores than single RGB image analysis, RGB/fluorescence image analysis, and the analysis of spectral image cubes only, respectively. These results demonstrate that the intelligent multimode diagnostic capability of an otoscope would be beneficial for better diagnosis and management of OM. © 2021 OSA - The Optical Society. All rights reserved.1
Benchmarking reconstructive spectrometer with multi-resonant cavities
Recent years have seen the rapid development of miniaturized reconstructive
spectrometers (RSs), yet they still confront a range of technical challenges,
such as bandwidth/resolution ratio, sensing speed, and/or power efficiency.
Reported RS designs often suffer from insufficient decorrelation between
sampling channels, which results in limited compressive sampling efficiency, in
essence, due to inadequate engineering of sampling responses. This in turn
leads to poor spectral-pixel-to-channel ratios (SPCRs), typically restricted at
single digits. So far, there lacks a general guideline for manipulating RS
sampling responses for the effectiveness of spectral information acquisition.
In this study, we shed light on a fundamental parameter from the compressive
sensing theory - the average mutual correlation coefficient v - and provide
insight into how it serves as a critical benchmark in RS design with regards to
the SPCR and reconstruction accuracy. To this end, we propose a novel RS design
with multi-resonant cavities, consisting of a series of partial reflective
interfaces. Such multi-cavity configuration offers an expansive parameter
space, facilitating the superlative optimization of sampling matrices with
minimized v. As a proof-of-concept demonstration, a single-shot, dual-band RS
is implemented on a SiN platform, tailored for capturing signature spectral
shapes across different wavelength regions, with customized photonic crystal
nanobeam mirrors. Experimentally, the device demonstrates an overall operation
bandwidth of 270 nm and a <0.5 nm resolution with only 15 sampling channels per
band, leading to a record high SPCR of 18.0. Moreover, the proposed
multi-cavity design can be readily adapted to various photonic platforms. For
instance, we showcase that by employing multi-layer coatings, an
ultra-broadband RS can be optimized to exhibit a 700 nm bandwidth with an SPCR
of over 100
Stand-alone wearable system for ubiquitous real-time monitoring of muscle activation potentials
Wearable technology is attracting most attention in healthcare for the acquisition of physiological signals. We propose a stand-alone wearable surface ElectroMyoGraphy (sEMG) system for monitoring the muscle activity in real time. With respect to other wearable sEMG devices, the proposed system includes circuits for detecting the muscle activation potentials and it embeds the complete real-time data processing, without using any external device. The system is optimized with respect to power consumption, with a measured battery life that allows for monitoring the activity during the day. Thanks to its compactness and energy autonomy, it can be used outdoor and it provides a pathway to valuable diagnostic data sets for patients during their own day-life. Our system has performances that are comparable to state-of-art wired equipment in the detection of muscle contractions with the advantage of being wearable, compact, and ubiquitous
Aerial base stations with opportunistic links for next generation emergency communications
Rapidly deployable and reliable mission-critical communication networks are fundamental requirements to guarantee the successful operations of public safety officers during disaster recovery and crisis management preparedness. The ABSOLUTE project focused on designing, prototyping, and demonstrating a high-capacity IP mobile data network with low latency and large coverage suitable for many forms of multimedia delivery including public safety scenarios. The ABSOLUTE project combines aerial, terrestrial, and satellites communication networks for providing a robust standalone system able to deliver resilience communication systems. This article focuses on describing the main outcomes of the ABSOLUTE project in terms of network and system architecture, regulations, and implementation of aerial base stations, portable land mobile units, satellite backhauling, S-MIM satellite messaging, and multimode user equipments
- …