Road Friction Virtual Sensing:A Review of Estimation Techniques with Emphasis on Low Excitation Approaches

In this paper, a review on road friction virtual sensing approaches is provided. In particular, this work attempts to address whether the road grip potential can be estimated accurately under regular driving conditions in which the vehicle responses remain within low longitudinal and lateral excitation levels. This review covers in detail the most relevant effect-based estimation methods; these are methods in which the road friction characteristics are inferred from the tyre responses: tyre slip, tyre vibration, and tyre noise. Slip-based approaches (longitudinal dynamics, lateral dynamics, and tyre self-alignment moment) are covered in the first part of the review, while low frequency and high frequency vibration-based works are presented in the following sections. Finally, a brief summary containing the main advantages and drawbacks derived from each estimation method and the future envisaged research lines are presented in the last sections of the paper

스티어 바이 와이어 시스템의 목표 조향감 재현을 위한 조향 반력 제어

학위논문(박사)--서울대학교 대학원 :공과대학 기계공학부,2020. 2. 이경수.This dissertation focused on the development of and steering assist torque control algorithm of Electric-Power-Steering (EPS) system from the conventional steering system perspective and Steer-by-Wire (SBW) system. The steering assist torque control algorithm has been developed to overcome the major disadvantage of the conventional method of time-consuming tuning to achieve the desired steering feel. A reference steering wheel torque map was designed by post-processing data obtained from target performance vehicle tests with a highly-rated steering feel for both sinusoidal and transition steering inputs. Adaptive sliding-mode control was adopted to ensure robustness against uncertainty in the steering system, and the equivalent moment of inertia damping coefficient and effective compliance were adapted to improve tracking performance. Effective compliance played a role in compensating the error between the nominal rack force and the actual rack force. For the SBW system, the previously proposed EPS assist torque algorithm has been also enhanced using impedance model and applied to steering feedback system. Stable execution and how to give the person the proper steering feedback torque of contact tasks by steering wheel system interaction with human has been identified as one of the major challenges in SBW system. Thus, the problem was solved by utilizing the target steering torque map proposed above. The impedance control consists of impedance model (Reference model with the target steering wheel torque map) and controller (Adaptive sliding mode control). The performance of the proposed controller was evaluated by conducting computer simulations and a hardware-in-the-loop simulation (HILS) under various steering conditions. Optimal steering wheel torque tracking performances were successfully achieved by the proposed EPS and SBW control algorithm.본 논문은 종래의 조향 시스템 관점에서 전동식 동력 조향 (EPS) 시스템과 스티어 바이 와이어 (SBW) 조향 보조 토크 제어 알고리즘의 개발을 중점으로 하였습니다. 기존 조향 보조 토크 제어 알고리즘은 원하는 조향감을 구현하기 위해 종래의 시간 소모적 인 튜닝 방법을 사용합니다. 이러한 주요 단점을 극복하기 위해 새로운 조향 보조 제어 알고리즘을 개발하였습니다. 목표 스티어링 휠 토크 맵은 정현파(Weave test) 및 등속도 스티어링 입력 (Transition test) 모두에 대해 높은 등급의 조향감을 차량 테스트에서 얻은 후 데이터 처리를 하여 설계되었습니다. 스티어링 시스템의 불확실성에 대한 강건성을 보장하기 위해 적응 형 슬라이딩 모드 제어가 채택되었으며, 관성 모멘트 감쇠 계수와 컴플라이언스 계수(Effective compliance)가 제어기 성능을 개선하도록 적응형 파라미터로 선정되었습니다. 컴플라이언스 계수는 계산된 랙 힘과 실제 랙 힘 사이의 차이를 보상하는 역할을 했습니다. SBW 시스템의 경우, 이전에 제안 된 EPS 지원 토크 알고리즘을 개선하고 향상시키기 위해 임피던스 모델을 사용하였으며 스티어링 피드백 시스템에 적용되었습니다. SBW 시스템의 주요 과제 중 하나는 사람과 스티어링 휠 시스템 상호 작용에 의해 안정적인 작동과 사람에게 적절한 스티어링 피드백 토크를 제공하는 방법입니다. 임피던스 제어는 임피던스 모델 (타겟 스티어링 휠 토크 맵)과 컨트롤러 (적응 슬라이딩 모드 제어)로 구성됩니다. 따라서, 상기 제안 된 목표 조향 토크 맵을 이용함으로써 스티어 바이 와이어에서 스티어링 피드백 토크를 절절히 적용 됨을 확인 하였습니다. 제안 된 컨트롤러의 성능은 다양한 조향 조건에서 컴퓨터 시뮬레이션 및 HILS (Hardware-in-the-loop) 시뮬레이션을 수행하여 평가되었습니다. 제안 된 EPS 및 SBW 제어 알고리즘을 통해 최적의 스티어링 휠 토크 추적 성능을 달성했습니다.Chapter 1 Introduction 1 1.1. Background and Motivation 1 1.2. Previous Researches 4 1.3. Thesis Objectives 9 1.4. Thesis Outline 10 Chapter 2 Dynamic Model of Steering Systems 11 2.1. Dynamic model of Hydraulic/Electrohydraulic Power-Assisted Steering Model 11 2.2. Dynamic model of Electric-Power-Assisted-Steering Model 17 2.3. Dynamic model of Steer-by-Wire Model 21 2.4. Rack force characteristic of steering system 23 Chapter 3 Target steering wheel torque tracking control 28 3.1. Target steering torque map generation 28 3.2. Adaptive sliding mode control design for target steering wheel torque tracking with EPS 30 3.2.1. Steering states estimation with a kalman filter 38 3.3. Impedance Control Design for Target Steering Wheel Torque Tracking with SBW 43 Chapter 4 Validation with Simulation and Hardware-in-the-Loops Simulation 49 4.1. Computer Simulation Results for EPS system 49 4.2. Hardware-in-the-Loops Simulation Results for EPS system 61 4.3. Computer Simulation Results for SBW system 77 4.4. Hardware-in-the-Loops Simulation Results for SBW system 82 Chapter 5 Conclusion and Future works 89 Bibliography 91 Abstract in Korean 97Docto

Multi-body dynamics: historical evolution and application

The historical developments in the discipline of engineering dynamics are briefly reviewed, with attention paid to the formulation and solution of the dynamic behaviour of multi-body systems. It is shown that the dynamic characteristics of practical multi-body systems are dependent upon the interactions of many physical phenomena that can induce, restrain or constrain motion of parts. The long process of understanding and formulating the physics of multi-body motions, in some cases with pioneering contributions centuries old, together with continual refinements in numerical techniques and enhanced computing power has resulted in the solution of quite complex and practical engineering problems. Linking the historical developments to the fundamental physical phenomena and their interactions, the paper presents solutions to two complex multi-body dynamic problems. The practical implications of the approach in design of these systems are highlighted

PLANNING AND DESIGN OF EXPRESS LANES CONNECTING TWO HIGHWAYS IN MIAMI, FLORIDA, USA

Rising traffic and congestion in urban areas increases a demand for long bridges and interchanges. However, construction and designing such bridges evolve the infrastructure due to being permanently affected by safety, environment and budget. Therefore, there is a variety of bridge construction types that are chosen depending on the location and several parameters such as feasibility, safety maintainability, cost, and simplicity of construction. Over 60 years, precast prestressed concrete girders have been widely used all over the USA owing to their low life-cycle cost, endurance and modularity..

Suspension parameters analysis for different track conditions

Dissertação de mestrado integrado em Engenharia Mecânica (área de especialização em Sistemas Mecatrónicos)Este trabalho, aqui apresentado, tem como objetivo o estudo do comportamento do sistema de suspensão de um veículo ao atravessar estradas com obstáculos, como lombas ou buracos. Para atingir este objetivo, uma vasta revisão literária foi feita. Sendo este um tópico extenso, três tipos de revisão foram feitos. Primeiro, a um estudo global à tecnologia usava hoje em dia em pneus e nos sistemas de suspensão de veículos foi compilado. Uma breve menção à cinemática de veículos é empreendida. De seguida, a dinâmica do contacto pneu/solo é sistematicamente explanada, para compreender os diversos modelos de pneu (força) existentes. Adicionalmente, os conceitos fundamentais da análise da dinâmica multicorpo são expostos para justificar a modelação do veículo como um sistema multicorpo. Com toda a teoria apresentada, os conceitos previamente explicados são aplicados na prática para a formulação de um método que visa estimar a trajetória de um veículo atravessando uma qualquer estrada. O primeiro passo a executar é a escolha do modelo de pneu a utilizar. Percebe-se que se deve usar modelos matemáticos, culminando na escolha da Magic Formula. Os passos seguintes consistem na introdução de uma metodologia, que estima o contacto entre um pneu e o solo, para simular as dinâmicas pneu/solo de um veículo. Dois métodos diferentes são expostos: o primeiro para estradas completamente planas, sem obstáculos; o segundo, para estradas com obstáculos, como lombas ou buracos. Este modelo é posteriormente inserido num programa de análise das dinâmicas multicorpo, MUBODYNA3D, e diversas simulações são realizadas. Estas simulações começam pela definição do veículo como um sistema multicorpo, com corpos conectados por juntas cinemáticas. As primeiras simulações são realizadas numa estrada plana para validar os modelos e metodologias previamente criadas. O integrador, que integra os resultados das equações do movimento para prever a trajetória, é refinado. Finalmente, simulações com estradas com obstáculos são geradas. Por fim, os resultados dessas simulações são discutidos, percebendo-se que apresentam um valor inesperado. Ao atravessar um obstáculo, as rodas perdem o contacto com a superfície, provocando a descolagem do carro. No entanto, é concluído que a análise de sistemas multicorpo é de extrema relevância para a simulação de realidades complexas, produzindo resultados precisos.This work, hereby presented, has a primary target of studying the behaviour of a road vehicle’s suspension system, while it is traversing roads with big obstacles, such as potholes or speed bumps/humps. To accomplish this task, a broad literature review was made. Since this is an extensive topic, three types of review were made. Firstly, an overview of the state-of-the-art technology used in tires and suspension systems nowadays is compiled. A brief mention to vehicle kinematics is also made. Then, the dynamics of the contact tire/road are systematically explained, in order to understand the diverse tire force models that exist. Lastly, a rundown of the fundamental concepts of multibody dynamics analysis is exposed to substantiate the modelling of a vehicle as a multibody system later on. With the theory behind, all concepts previously abridged are put to practice, into the formulation of a method to estimate the trajectory of a vehicle crossing a certain road. The first step to execute this is to choose the tire force model to use. It is seen that, in this case, the mathematical models are the best choice, which culminates in the selection of the Magic Formula model. The following steps consist of introducing the contact estimation methodology created to simulate the tire/road dynamics of a vehicle. Two different methods are exposed: the first for fully flat roads, with no obstacles; the second, for road that possess obstacles, like bumps for example. This model is then inserted into a multibody dynamics analysis program, MUBODYNA3D, and some forward dynamic simulations are performed. These simulations start with the definition of the vehicle as a multibody system, with bodies connected by kinematic joints. The first simulations are performed in flat roads to validate the models and methodologies created. The solver, that integrates the results of the equations of motion to predict the trajectory, are then refined. Finally, simulations using roads with obstacles are conducted and the results analysed. In the end, the simulations result in some unexpected behaviour from the vehicle. While crossing an obstacle, it tends to lose contact with the surface and, thus, lift off the road, which is unrealistic. Nonetheless, it is concluded that multibody systems analysis is extremely important to simulate and analyse complex realities, with precise results

Design of Formula Student Wheel Suspensions

Tato práce se se zabývá návrhem kinematiky zavěšení kol obou náprav. Na základě analýz jízdních dat, multi-body simulací v softwaru Adams Car, simulací v Matlabu a analytických kalkulací v Mathcadu, je navržena řada změn s cílem zlepšit jízdní vlastnosti vozu Formule student, tyto změny jsou následně implementovány do CAD modelu vozu. Jednotlivé změny kinematiky náprav jsou provedeny na základě analýzy konkrétního problému, který se snaží řešit. Jednou z problematik je zástavbová náročnost systému odpružení a zavěšení zadních kol, zde je cílem snížit hmotnost, výšku těžiště a moment setrvačnosti. Další problematikou je geometrie předního kola, kde je cílem zlepšit využití pneumatik a snížit síly v řízení. Dále se práce zabývá simulacemi elastokinematiky zadní nápravy, součástí je také návrh měřícího zařízení. V poslední části je zkoumán vliv provedených změn i elastokinematiky na jízdní dynamiku vozu v ustálených stavech za pomocí MM metody simulované s modelem celého vozu v Adams Car a zpracované v Matlabu.This thesis deals with design of suspension kinematics of both axles. Based on analyses of on-track data, multi-body simulations in Adams Car, simulations in Matlab and analytical calculations in Mathcad, various changes of the design are conducted in order to improve the vehicle dynamics of the Formula student car. Individual kinematic changes are made as a response to specific problems that were perceived with the previous car. One of the issues is the packaging of the decoupled roll and heave suspension system and rear suspension links, with the aim to minimize mass, center of gravity height and yawing moment of inertia. Beside packaging, changes of front wheel geometry were conducted to utilize the tire and minimize steering torque. Also, kinematics and compliance simulations of the rear suspension are conducted and a measuring device is designed. Lastly, the effects of kinematic changes and compliance on the steady-state vehicle dynamics are studied using the Force-moment method full-vehicle simulation in Adams, which is then post-processed in Matlab.