Voice Capacity and Data Response Time in Cognitive Radio Networks

The growing interest towards wireless communication services over the recent years has increased the demand for radio spectrum. Inefficient spectrum management together with the scarcity of the radio spectrum is a limiting factor for the development of modern wireless networks. As a solution, the idea of cognitive radio networks (CRNs) is introduced to use licensed spectrum for the benefit of the unlicensed secondary users. However, the preemptive priority of the licensed users results in random resource availabilities at the secondary networks, which makes the quality-of-service (QoS) support challenging. With the increasing demand for elastic/interactive data services (internet based services) and wireless multimedia services, QoS support becomes essential for CRNs. This research investigates the voice and elastic/interactive data service support over CRNs, in terms of their delay requirements. The packet level requirements of the voice service and session level delay requirements of the elastic/interactive data services are studied. In particular, constant-rate and on-off voice traffic capacities are analyzed over CRNs with centralized and distributed network coordination. Some generic channel access schemes are considered as the coordination mechanism, and call admission control algorithms are developed for non-fully-connected CRNs. Advantage of supporting voice traffic flows with different delay requirements in the same network is also discussed. The mean response time of the elastic data traffic over a centralized CRN is studied, considering the shortest processor time with and without preemption and shortest remaining processor time service disciplines, in comparison with the processor sharing service discipline. Effects of the traffic load at the base station and file length (service time requirement) distribution on the mean response time are discussed. Finally, the relationship between the mean response times of interactive and elastic data traffic is studied

Performance analysis of networks on chips

Modules on a chip (such as processors and memories) are traditionally connected through a single link, called a bus. As chips become more complex and the number of modules on a chip increases, this connection method becomes inefficient because the bus can only be used by one module at a time. Networks on chips are an emerging technology for the connection of on-chip modules. In networks on chips, switches are used to transmit data from one module to another, which entails that multiple links can be used simultaneously so that communication is more efficient. Switches consist of a number of input ports to which data arrives and output ports from which data leaves. If data at multiple input ports has to be transmitted to the same output port, only one input port may actually transmit its data, which may lead to congestion. Queueing theory deals with the analysis of congestion phenomena caused by competition for service facilities with scarce resources. Such phenomena occur, for example, in traffic intersections, manufacturing systems, and communication networks like networks on chips. These congestion phenomena are typically analysed using stochastic models, which capture the uncertain and unpredictable nature of processes leading to congestion (such as irregular car arrivals to a traffic intersection). Stochastic models are useful tools for the analysis of networks on chips as well, due to the complexity of data traffic on these networks. In this thesis, we therefore study queueing models aimed at networks on chips. The thesis is centred around two key models: A model of a switch in isolation, the so-called single-switch model, and a model of a network of switches where all traffic has the same destination, the so-called network of polling stations. For both models we are interested in the throughput (the amount of data transmitted per time unit) and the mean delay (the time it takes data to travel across the network). Single-switch models are often studied under the assumption that the number of ports tends to infinity and that traffic is uniform (i.e., on average equally many packets arrive to all buffers, and all possible destinations are equally likely). In networks on chips, however, the number of buffers is typically small. We introduce a new approximation specifically aimed at small switches with (memoryless) Bernoulli arrivals. We show that, for such switches, this approximation is more accurate than currently known approximations. As traffic in networks on chips is usually non-uniform, we also extend our approximation to non-uniform switches. The key difference between uniform and nonuniform switches is that in non-uniform switches, all queues have a different maximum throughput. We obtain a very accurate approximation of this throughput, which allows us to extend the mean delay approximation. The extended approximation is derived for Bernoulli arrivals and correlated arrival processes. Its accuracy is verified through a comparison with simulation results. The second key model is that of concentrating tree networks of polling stations (polling stations are essentially switches where all traffic has the same output port as destination). Single polling stations have been studied extensively in literature, but only few attempts have been made to analyse networks of polling stations. We establish a reduction theorem that states that networks of polling stations can be reduced to single polling stations while preserving some information on mean waiting times. This reduction theorem holds under the assumption that the last node of the network uses a so-called HoL-based service discipline, which means that the choice to transmit data from a certain buffer may only depend on which buffers are empty, but not on the amount of data in the buffers. The reduction theorem is a key tool for the analysis of networks of polling stations. In addition to this, mean waiting times in single polling stations have to be calculated, either exactly or approximately. To this end, known results can be used, but we also devise a new single-station approximation that can be used for a large subclass of HoL-based service disciplines. Finally, networks on chips typically implement flow control, which is a mechanism that limits the amount of data in the network from one source. We analyse the division of throughput over several sources in a network of polling stations with flow control. Our results indicate that the throughput in such a network is determined by an interaction between buffer sizes, flow control limits, and service disciplines. This interaction is studied in more detail by means of a numerical analysis

Approximation of discrete-time polling systems via structured Markov chains

We devise an approximation of the marginal queue length distribution in discrete-time polling systems with batch arrivals and fixed packet sizes. The polling server uses the Bernoulli service discipline and Markovian routing. The 1-limited and exhaustive service disciplines are special cases of the Bernoulli service discipline, and traditional cyclic routing is a special case of Markovian routing. The key step of our approximation is the translation of the polling system to a structured Markov chain, while truncating all but one queue. Numerical experiments show that the approximation is very accurate in general. Our study is motivated by networks on chips with multiple masters (e.g., processors) sharing a single slave (e.g., memory)

Application of learning algorithms to traffic management in integrated services networks.

SIGLEAvailable from British Library Document Supply Centre-DSC:DXN027131 / BLDSC - British Library Document Supply CentreGBUnited Kingdo

On scheduling input queued cell switches

Output-queued switching, though is able to offer high throughput, guaranteed delay and fairness, lacks scalability owing to the speed up problem. Input-queued switching, on the other hand, is scalable, and is thus becoming an attractive alternative. This dissertation presents three approaches toward resolving the major problem encountered in input-queued switching that has prohibited the provision of quality of service guarantees. First, we proposed a maximum size matching based algorithm, referred to as min-max fair input queueing (MFIQ), which minimizes the additional delay caused by back pressure, and at the same time provides fair service among competing sessions. Like any maximum size matching algorithm, MFIQ performs well for uniform traffic, in which the destinations of the incoming cells are uniformly distributed over all the outputs, but is not stable for non-uniform traffic. Subse-quently, we proposed two maximum weight matching based algorithms, longest normalized queue first (LNQF) and earliest due date first matching (EDDFM), which are stable for both uniform and non-uniform traffic. LNQF provides fairer service than longest queue first (LQF) and better traffic shaping than oldest cell first (OCF), and EDDEM has lower probability of delay overdue than LQF, LNQF, and OCF. Our third approach, referred to as store-sort-and-forward (SSF), is a frame based scheduling algorithm. SSF is proved to be able to achieve strict sense 100% throughput, and provide bounded delay and delay jitter for input-queued switches if the traffic conforms to the (r, T) model

Delay analysis for wireless applications using a multiservice multiqueue processor sharing model

The ongoing development of wireless networks supporting multimedia applications requires service providers to efficiently deliver complex Quality of Service (QoS) requirements. The wide range of new applications in these networks significantly increases the difficulty of network design and dimensioning to meet QoS requirements. Medium Access Control (MAC) protocols affect QoS achieved by wireless networks. Research on analysis and performance evaluation is important for the efficient protocol design. As wireless networks feature scarce resources that are simultaneously shared by all users, processor sharing (PS) models were proposed for modelling resource sharing mechanisms in such systems. In this thesis, multi-priority MAC protocols are proposed for handling the various service traffic types. Then, an investigation of multiservice multiqueue PS models is undertaken to analyse the delay for some recently proposed wireless applications. We start with an introduction to MAC protocols for wireless networks which are specified in IEEE standards and then review scheduling algorithms which were proposed to work with the underlying MAC protocols to cooperatively achieve QoS goals. An overview of the relevant literature is given on PS models for performance analysis and evaluation of scheduling algorithms. We propose a multiservice multiqueue PS model using a scheduling scheme in multimedia wireless networks with a comprehensive description of the analytical solution. Firstly, we describe the existing multiqueue processor sharing (MPS) model, which uses a fixed service quantum at each queue, and correct a subtle incongruity in previous solutions presented in the literature. Secondly, a new scheduling framework is proposed to extend the previous MPS model to a general case. This newly proposed analytical approach is based on the idea that the service quantum arranged by a MAC scheduling controller to service data units can be priority-based. We obtain a closed-form expression for the mean delay of each service class in this model. In summary, our new approach simplifies MAC protocols for multimedia applications into an analytical model that includes more complex and realistic traffic models without compromising details of the protocol and significantly reduces the number of MAC headers, thus the overall average delay will be decreased. In response to using the studied multiservice multiqueue PS models, we apply the MPS model to two wireless applications: Push to Talk (PTT) service over GPRS/GSM networks and the Worldwide Interoperability for Microwave Access (WiMAX) networks. We investigate the uplink delay of PTT over traditional GPRS/GSM networks and the uplink delay for WiMAX Subscriber Station scheduler under a priority-based fair scheduling. MAC structures capable of supporting dynamically varying traffic are studied for the networks, especially, with the consideration of implementation issues. The model provides useful insights into the dynamic performance behaviours of GPRS/GSM and WiMAX networks with respect to various system parameters and comprehensive traffic conditions. We then evaluate the model under some different practical traffic scenarios. Through modelling of the operation of wireless access systems, under a variety of multimedia traffic, our analytical approaches provide practical analysis guidelines for wireless network dimensioning

A Real-Time Communication Framework for Wireless Sensor Networks

Recent advances in miniaturization and low power design have led to a flurry of activity in wireless sensor networks. Sensor networks have different constraints than traditional wired networks. A wireless sensor network is a special network with large numbers of nodes equipped with embedded processors, sensors, and radios. These nodes collaborate to accomplish a common task such as environment monitoring or asset tracking. In many applications, sensor nodes will be deployed in an ad-hoc fashion without careful planning. They must organize themselves to form a multihop, wireless communication network. In sensor network environments, much research has been conducted in areas such as power consumption, self-organisation techniques, routing between the sensors, and the communication between the sensor and the sink. On the other hand, real-time communication with the Quality of Service (QoS) concept in wireless sensor networks is still an open research field. Most protocols either ignore real time or simply attempt to process as fast as possible and hope that this speed is sufficient to meet the deadline. However, the introduction of real-time communication has created additional challenges in this area. The sensor node spends most of its life routing packets from one node to another until the packet reaches the sink; therefore, the node functions as a small router most of the time. Since sensor networks deal with time-critical applications, it is often necessary for communication to meet real time constraints. However, research that deals with providing QoS guarantees for real-time traffic in sensor networks is still in its infancy.This thesis presents a real-time communication framework to provide quality of service in sensor networks environments. The proposed framework consists of four components: First, present an analytical model for implementing Priority Queuing (PQ) in a sensor node to calculate the queuing delay. The exact packet delay for corresponding classes is calculated. Further, the analytical results are validated through an extensive simulation study. Second, report on a novel analytical model based on a limited service polling discipline. The model is based on an M/D/1 queuing system (a special class of M/G/1 queuing systems), which takes into account two different classes of traffic in a sensor node. The proposed model implements two queues in a sensor node that are served in a round robin fashion. The exact queuing delay in a sensor node for corresponding classes is calculated. Then, the analytical results are validated through an extensive simulation study. Third, exhibit a novel packet delivery mechanism, namely the Multiple Level Stateless Protocol (MLSP), as a real-time protocol for sensor networks to guarantee the traffic in wireless sensor networks. MLSP improves the packet loss rate and the handling of holes in sensor network much better than its counterpart, MMSPEED. It also introduces the k-limited polling model for the first time. In addition, the whole sending packets dropped significantly compared to MMSPEED, which it leads to decrease the consumption power. Fourth, explain a new framework for moving data from the sink to the user, at a low cost and low power, using the Universal Mobile Telecommunication System (UMTS), which is standard for the Third Generation Mobile System (3G). The integration of sensor networks with the 3G mobile network infrastructure will reduce the cost of building new infrastructures and enable the large-scale deployment of sensor network

Resource Management in Multimedia Networked Systems

Error-free multimedia data processing and communication includes providing guaranteed services such as the colloquial telephone. A set of problems have to be solved and handled in the control-management level of the host and underlying network architectures. We discuss in this paper \u27resource management\u27 at the host and network level, and their cooperation to achieve global guaranteed transmission and presentation services, which means end-to-end guarantees. The emphasize is on \u27network resources\u27 (e.g., bandwidth, buffer space) and \u27host resources\u27 (e.g., CPU processing time) which need to be controlled in order to satisfy the Quality of Service (QoS) requirements set by the users of the multimedia networked system. The control of the specified resources involves three actions: (1) properly allocate resources (end-to-end) during the multimedia call establishment, so that traffic can flow according to the QoS specification; (2) control resource allocation during the multimedia transmission; (3) adapt to changes when degradation of system components occurs. These actions imply the necessity of: (a) new services, such as admission services, at the hosts and intermediate network nodes; (b) new protocols for establishing connections which satisfy QoS requirements along the path from send to receiver(s), such as resource reservation protocol; (c) new control algorithms for delay, rate and error control; (d) new resource monitoring protocols for reporting system changes, such as resource administration protocol; (e) new adaptive schemes for dynamic resource allocation to respond to system changes; and (f) new architectures at the hosts and switches to accommodate the resource management entities. This article gives an overview of services, mechanisms and protocols for resource management as outlined above