Analysis and Simulation of the Signals Transmission in the DVB-H/SH Standards

Tato disertační práce se zabývá analýzou, simulací a měřením zpracování a přenosu signálů digitální televize pro příjem mobilního TV vysílání ve standardech DVB-H a DVB-SH. Tyto standardy vycházejí z předpokladu, že příjem signálu je charakterizován modely přenosových kanálů s vícecestným šířením. Tyto, tzv. únikové kanály, jsou charakterizovány hlavně zpožděním a ziskem jednotlivých cest. V závislosti na dalších parametrech (rychlost přijímače, Dopplerovské spektrum), je možné rozdělit únikové kanály do třech hlavních skupin: mobilní, přenosné a fixní. Dá se předpokládat, že v různých modelech kanálů bude přenášený signál různě ovlivněn. Proto je potřebné najít optimální parametry systémů (DVB-H/SH) pro kvalitní příjem vysílaných služeb mobilní televize, což je hlavním cílem této disertační práci. Pro tento účel byly vytvořeny dvě vhodné aplikace (jedna pro DVB-H a jedna pro DVB-SH) s GUI v prostředí MATLAB, které umožňují simulovat a analyzovat míru zkreslení signálu v případě mobilních, přenosných a fixních scénářů přenosu. Navíc, tyto aplikace obsahují i druhý samostatný simulátor pro nastavení a modifikaci parametrů jednotlivých přenosových cest. Díky tomu je možné zhodnotit vliv parametrů celého systému a kanálových modelů na dosaženou chybovost (BER a MER) a kvalitu přenosu. Ve všech přenosových scénářích (v závislosti na poměru C/N) byly získané, vyhodnocené a diskutované zkreslení signálů. Navíc, u standardu DVB-H, všechny získané výsledky ze simulací byly ověřeny měřením. Rozdíly mezi dosaženými výsledky (simulace a měření) byly rovněž podrobeny diskuzi. Tuto disertační práci je možné rozdělit do čtyř hlavních částí. První část disertační práce se zabývá rešerší současného vývoje v oblasti digitálního televizního vysílání na mobilní terminály ve standardech DVB-H/SH. Na konci této části jsou jasně popsány cíle této disertační práce. Druhá část práce je zaměřená na stručný popis blokového diagramu vysílačů v obou standardech DVB-H/SH. Dále jsou stručně popsány modely přenosových kanálů, které se používají pro modelování přenosu signálu. Stručný popis vytvořených aplikací, i s vývojovým diagramem, které jsou vhodné pro simulaci a analýzu přenosu v DVB-H/SH, jsou popsány v třetí části práce. Čtvrtá a nejdelší část této disertační práce se zabývá vyhodnocením získaných výsledků ze simulací a měření.This dissertation thesis deals with the analysis, simulation and measurement of the signal processing and transmission in DVB-H and DVB-SH standards. These standards are based on the assumption that signal reception is characterized by the transmission channels with echoes. These, so called fading channels, are mainly characterized by the path delays and path losses. Depending on the other, additional features (speed of the receiver, Doppler spectrum, etc.), it can be possible divided these channels onto three main groups: mobile, portable and fixed. Of course, signal transmission in different transmission channel models are affected differently. Therefore, it is needed found the optimal system parameters in both, DVB-H and DVB-SH standards, for the quality reception of the broadcasted mobile TV services, which is the main goal of this thesis. For this purpose, two appropriate applications (one for DVB-H and one for DVB-SH) with GUI were created in MATLAB, which enable simulated and analyzed the signal distortions in mobile, portable and fixed transmission scenarios. Moreover, these applications also contain a second application with GUI for the easy set and modification of the parameters of the used channel models. Therefore, it is possible to evaluate the effect of parameters of whole system and channel models on the achieved error rate (BER and MER) and quality of the transmission. In all mentioned transmission scenarios, the signal distortions (depending on the Carrier-to-Noise ratio) were obtained, evaluated and discussed in this dissertation thesis. Furthermore, in case of DVB-H, all obtained results from the simulations, were verified by the measuring. Differences between the obtained results (simulation and measuring) are also discussed. This dissertation thesis can be divided into four main parts. The first part of this dissertation thesis, after the short introduction, deals with present state-of-the-art and literature survey in mobile broadcast DVB-H/SH standards. At the end of this part are clearly outlined the main aims of this dissertation thesis. Second part is focused on the brief description of the functional block diagram of transmitters in both, DVB-H/SH standards. Furthermore, there are briefly described the transmission fading channel models, which are commonly used for the modeling of the signal transmission. The brief description of program applications with flowcharts, appropriate for the simulation of the transmission in the DVB-H/SH standards, are presented and described in the third part of this thesis. Finally, the fourth and longest part of this thesis is focused on the evaluation and comparison of obtained results from the simulations and measurements.

A survey of digital television broadcast transmission techniques

This paper is a survey of the transmission techniques used in digital television (TV) standards worldwide. With the increase in the demand for High-Definition (HD) TV, video-on-demand and mobile TV services, there was a real need for more bandwidth-efficient, flawless and crisp video quality, which motivated the migration from analogue to digital broadcasting. In this paper we present a brief history of the development of TV and then we survey the transmission technology used in different digital terrestrial, satellite, cable and mobile TV standards in different parts of the world. First, we present the Digital Video Broadcasting standards developed in Europe for terrestrial (DVB-T/T2), for satellite (DVB-S/S2), for cable (DVB-C) and for hand-held transmission (DVB-H). We then describe the Advanced Television System Committee standards developed in the USA both for terrestrial (ATSC) and for hand-held transmission (ATSC-M/H). We continue by describing the Integrated Services Digital Broadcasting standards developed in Japan for Terrestrial (ISDB-T) and Satellite (ISDB-S) transmission and then present the International System for Digital Television (ISDTV), which was developed in Brazil by adopteding the ISDB-T physical layer architecture. Following the ISDTV, we describe the Digital Terrestrial television Multimedia Broadcast (DTMB) standard developed in China. Finally, as a design example, we highlight the physical layer implementation of the DVB-T2 standar

A Study on Hierarchical Transmission Method for Additional Service of Advanced T-DMB System

The quality of traditional analog radio broadcasting systems has significantly deteriorated in recent years, due to serious electromagnetic pollution in urban areas, especially in mobile environments. Among the new broadcasting systems, Digital Audio Broadcasting (DAB), which is based on the Eureka-147 standard, provides CD-quality audio broadcasting services for fixed, portable and mobile applications, and has been recognized as a promising solution. Recently, the DAB system was announced as the official transmission specification of the Digital Multimedia Broadcasting (DMB) system in Korea. The DMB system has a 1.7Mbps throughput, which is sufficient for multimedia broadcasting services as well as CD-quality digital audio services. However, the throughput is reduced to 1.152Mbps when we take into account the overhead such as bits needed for synchronization, error correction and multiplex configuration information. Therefore, multimedia broadcasting services have a low throughput. Recently, there is a need to upgrade the conventional T-DMB system, in order to provide additional services and a higher throughput for multimedia broadcasting services. In this thesis, we propose a structure for an advanced T-DMB (AT-DMB) system, which is based on Eureka-147, with UEP coding methods and hierarchical 16QAM/64QAM modulation, to provide additional services while maintaining the BER performance. A hierarchical modulation scheme, strong channel code and unequal error protection (UEP) are applied to the conventional T-DMB system, in order to enhance the conventional T-DMB system and provide additional mobile user services. Furthermore, this thesis proposes a non-uniform 16QAM/64QAM modulation scheme combined with various bit splitting methods and coding methods such as iterative codes. The conventional T-DMB system based on Eureka-147 has the approved serial concatenated coding scheme. This thesis also applies the serial concatenated coding scheme as an HP(High priority) stream coding scheme, in order to provide a continuous conventional T-DMB service to subscribers. The performance gap between HP and LP(Low priority) streams is very large. This means that the performance of the HP and LP streams involves trade-offs, when applying the same coding method. If the performance of the LP stream is poor, there is no point in providing the LP stream to subscribers. Therefore, this thesis focuses on reducing the performance gap between the HP and LP streams. This is why this thesis applies iterative codes to the LP stream. Among iterative codes, double binary turbo codes and LDPC (low density parity check) codes are good candidates for the AT-DMB system, because they approach the Shannon limit performance and involve a simple puncturing device and a flexible block size/coding rate combination. The proposed AT-DMB system model with the UEP coding method, hierarchical modulation and bit splitting method provides a means of achieving high performance, multimedia broadcasting via the conventional T-DMB system.제 1 장 서론 = 1 제 2 장 지상파 DMB 시스템 모델 = 3 제 3 장 차세대 지상파 DMB 시스템 모델 = 7 제 3-1 절 차세대 지상파 DMB 시스템 개발의 필요성과 개념 = 7 제 3-2 절 계층적 변조방식 = 10 제 3-3 절 UEP(Unequal Error Protection) 시스템 = 14 제 4 장 부가서비스 복조를 위한 비트분리방법 = 17 제 4-1 절 LLR 방법 = 18 제 4-2 절 MAX 방법 = 21 제 4-3 절 Center focusing 방법 = 22 제 4-4 절 복잡도 비교 = 24 제 5 장 부가서비스에 고려되는 채널 부호화방법 = 25 제 5-1 절 Double binary turbo 부호 = 26 제 5-2 절 DVB-S2 규격의 LDPC 부호 = 31 제 5-3 절 IEEE 802.16e에 적용된 LDPC 부호 = 37 제 6 장 시뮬레이션 결과 = 40 제 6-1 절 시뮬레이션 파라메터 = 40 제 6-2 절 비트분리 방법에 따른 시뮬레이션 결과 = 42 제 6-3 절 부가서비스의 부호화 방식에 따른 시뮬레이션 결과 = 44 제 7 장 결론 = 54 참고문헌 = 5

Soluções de broadcast para redes 4G

Mestrado em Engenharia Electrónica e de TelecomunicaçõesA primeira difusão de conteúdos video e audio teve um forte impacto no quotidiano da população que assistiu a uma revolução nos modelos de transmissão de informação e de entretenimento. A evolução desde então foi significativa, e já na era digital, encontramo-nos face a uma nova sub-elevação da metodologia e do conceito subjacentes à transmissão de conteudos multimédia. O mundo actual apresenta, contudo, diferentes requisitos, de entre os quais se destacam a procura pela alta definição e mobilidade. A mobilidade tem sido um particular foco de atenção por parte dos operadores que exploram agora modelos para entregar uma vasta gama de serviços que sejam atractivos para os utilizadores. Esta dissertação apresenta um sumário das tecnologias emergentes de broadcast que se distinguem nas várias partes do mundo com a sua particular incidência geográfica, características e cenários de aplicação. É ainda apresentada uma arquitectura 4G abordando assuntos inerentes à mobilidade e qualidade de serviço com particular incidência nos aspectos relacionados com a integração de uma tecnologia de broadcast particular. Para avaliação da arquitectura proposta foram efectuados estudos com base num equipamento de broadcast na sua versão comercial, permitindo desta forma obter uma análise que ilustra o que os operadores podem esperar do estado actual dos dispositivos. Os resultados permitiram retirar ilações sobre o comportamento de um equipamento considerado como um produto final a disponibilizar aos operadores, quando integrado num ambiente 4G com suporte de mobilidade e QoS. Nomeadamente é discutida a sua aplicabildiade tendo em linha de conta as desvantagens introduzidas pelas características inerentes à própria tecnologia.Broadcast of video and audio through analogical television completely changed the paradigm of information and entertainment divulgation. Today, in the “digital era”, the Analogue Switch Off revolution is being held. Manufacturers and operators already show concerns regarding the support of mobility, quality of experience and of service. Delivering competitive High Definition contents and providing solutions for the average “on-the-move” user are two of the most important issues to be dealt by the service providers, which are also within the analysis scope of this work. This dissertation presents an overview on the most relevant broadcast technologies which are assumed to be of relative acceptance in their respective target market. It presents their main characteristics and applicability. 4G architectural concepts are also analyzed, closely dealing with mobility and quality of service provisioning, with particular focus on the seamless integration of broadcast technologies. As a mean to evaluate the feasibility of integrating broadcast technologies with 4G architectures, a performance evaluation study was performed using commercial equipment. In this way a several set of considerations constructed illustrating the features and functionalities which operators can expect or disregard from professional commercial broadcasting devices. Results allow the withdrawing of conclusions concerning the integration of a final broadcasting solution when incorporated within a 4G environment with QoS and mobility support. Its applicability is evaluated having in mind the performance drawbacks introduced by the specific technology, and generalized towards the gathering of more general conclusions which consider the main characteristics of the commercial broadcasting devices

An overview on the standard of digital video broadcasting – terrestrial.

Digital Video Broadcasting (DVB) es un consorcio formado por industriales de los medios de comunicación, que está integrado por radiodifusores, fabricantes, operadores de redes, desarrolladores de software y organismos reguladores. El consorcio fue creado con el fin de definir las normas técnicas para estandarizar todos los aspectos relacionados con la prestación de servicios de televisión digital. El estándar DVB ha sido adoptado en Europa, Oriente Medio, Suráfrica y Australasia. Adicionalmente, el estándar DVB fue seleccionado en Colombia y Panamá como el sistema de transmisión de televisión digital terrestre (DVB-T/T2). El estándar DVB es un conjunto de especificaciones que permiten la integración de información multimedia para proveer servicios de información, educación, negocios y entretenimiento. La implementación de DVB requiere de acuerdos entre los radiodifusores, operadores de redes y fabricantes en la definición de los parámetros de operación, además de tener en cuenta las normativas gubernamentales. Este artículo presenta un resumen de los principales elementos definidos en el estándar DVB-T/T2, basado en los documentos guía elaborados por el consorcio DVB, e incluye algunas de las acciones tomadas durante el proceso de implementación de DVB-T/T2 en Colombia

Empirical Evaluation of the Impact of Wind Turbines on DVB-T Reception Quality

[EN] This paper describes the results of two extensive measurement campaigns for evaluating the potential impact of scattered signals from wind turbines on terrestrial DTV reception quality in the UHF band. A detailed description of the different propagation channels encountered is provided. Furthermore, empirical threshold carrier-to-noise requirements for Quasi Error Free reception in the DVB-T system in the area of influence of a wind farm are presented, and the situations where a significant degradation can be found are identified and characterized.This work has been partially supported by the UPV/EHU GIC 07/110-IT-374-07, by the Basque Government under both the SAIOTEK program and the program for the training of the researcher staff (BFI08.230), by the Spanish Ministry of Science and Innovation under the project NG-RADIATE, TEC2009-14201, and by the Spanish Ministry of Industry, Tourism and Trade under the project ENGINES, TSI-020400-2010-188. ENGINES project is under the Celtic Initiative (Celtic Label CP7-005)

Architecture and algorithms for the implementation of digital wireless receivers in FPGA and ASIC: ISDB-T and DVB-S2 cases

[EN] The first generation of Terrestrial Digital Television(DTV) has been in service for over a decade. In 2013, several countries have already completed the transition from Analog to Digital TV Broadcasting, most of which in Europe. In South America, after several studies and trials, Brazil adopted the Japanese standard with some innovations. Japan and Brazil started Digital Terrestrial Television Broadcasting (DTTB) services in December 2003 and December 2007 respectively, using Integrated Services Digital Broadcasting - Terrestrial (ISDB-T), also known as ARIB STD-B31. In June 2005 the Committee for the Information Technology Area (CATI) of Brazilian Ministry of Science and Technology and Innovation MCTI approved the incorporation of the IC-Brazil Program, in the National Program for Microelectronics (PNM) . The main goals of IC-Brazil are the formal qualification of IC designers, support to the creation of semiconductors companies focused on projects of ICs within Brazil, and the attraction of semiconductors companies focused on the design and development of ICs in Brazil. The work presented in this thesis originated from the unique momentum created by the combination of the birth of Digital Television in Brazil and the creation of the IC-Brazil Program by the Brazilian government. Without this combination it would not have been possible to make these kind of projects in Brazil. These projects have been a long and costly journey, albeit scientifically and technologically worthy, towards a Brazilian DTV state-of-the-art low complexity Integrated Circuit, with good economy scale perspectives, due to the fact that at the beginning of this project ISDB-T standard was not adopted by several countries like DVB-T. During the development of the ISDB-T receiver proposed in this thesis, it was realized that due to the continental dimensions of Brazil, the DTTB would not be enough to cover the entire country with open DTV signal, specially for the case of remote localizations far from the high urban density regions. Then, Eldorado Research Institute and Idea! Electronic Systems, foresaw that, in a near future, there would be an open distribution system for high definition DTV over satellite, in Brazil. Based on that, it was decided by Eldorado Research Institute, that would be necessary to create a new ASIC for broadcast satellite reception. At that time DVB-S2 standard was the strongest candidate for that, and this assumption still stands nowadays. Therefore, it was decided to apply to a new round of resources funding from the MCTI - that was granted - in order to start the new project. This thesis discusses in details the Architecture and Algorithms proposed for the implementation of a low complexity Intermediate Frequency(IF) ISDB-T Receiver on Application Specific Integrated Circuit (ASIC) CMOS. The Architecture proposed here is highly based on the COordinate Rotation Digital Computer (CORDIC) Algorithm, that is a simple and efficient algorithm suitable for VLSI implementations. The receiver copes with the impairments inherent to wireless channels transmission and the receiver crystals. The thesis also discusses the Methodology adopted and presents the implementation results. The receiver performance is presented and compared to those obtained by means of simulations. Furthermore, the thesis also presents the Architecture and Algorithms for a DVB-S2 receiver targeting its ASIC implementation. However, unlike the ISDB-T receiver, only preliminary ASIC implementation results are introduced. This was mainly done in order to have an early estimation of die area to prove that the project in ASIC is economically viable, as well as to verify possible bugs in early stage. As in the case of ISDB-T receiver, this receiver is highly based on CORDIC algorithm and it was prototyped in FPGA. The Methodology used for the second receiver is derived from that used for the ISDB-T receiver, with minor additions given the project characteristics.[ES] La primera generación de Televisión Digital Terrestre(DTV) ha estado en servicio por más de una década. En 2013, varios países completaron la transición de transmisión analógica a televisión digital, la mayoría de ellas en Europa. En América del Sur, después de varios estudios y ensayos, Brasil adoptó el estándar japonés con algunas innovaciones. Japón y Brasil comenzaron a prestar el servicio de Difusión de Televisión Digital Terrestre (DTTB) en diciembre de 2003 y diciembre de 2007 respectivamente, utilizando Radiodifusión Digital de Servicios Integrados Terrestres (ISDB-T), también conocida como ARIB STD-B31. En junio de 2005, el Comité del Área de Tecnología de la Información (CATI) del Ministerio de Ciencia, Tecnología e Innovación de Brasil - MCTI aprobó la incorporación del Programa CI-Brasil, en el Programa Nacional de Microelectrónica (PNM). Los principales objetivos de la CI-Brasil son la formación de diseñadores de CIs, apoyar la creación de empresas de semiconductores enfocadas en proyectos de circuitos integrados dentro de Brasil, y la atracción de empresas de semiconductores interesadas en el diseño y desarrollo de circuitos integrados. El trabajo presentado en esta tesis se originó en el impulso único creado por la combinación del nacimiento de la televisión digital en Brasil y la creación del Programa de CI-Brasil por el gobierno brasileño. Sin esta combinación no hubiera sido posible realizar este tipo de proyectos en Brasil. Estos proyectos han sido un trayecto largo y costoso, aunque meritorio desde el punto de vista científico y tecnológico, hacia un Circuito Integrado brasileño de punta y de baja complejidad para DTV, con buenas perspectivas de economía de escala debido al hecho que al inicio de este proyecto, el estándar ISDB-T no fue adoptado por varios países como DVB-T. Durante el desarrollo del receptor ISDB-T propuesto en esta tesis, se observó que debido a las dimensiones continentales de Brasil, la DTTB no sería suficiente para cubrir todo el país con la señal de televisión digital abierta, especialmente para el caso de localizaciones remotas, apartadas de las regiones de alta densidad urbana. En ese momento, el Instituto de Investigación Eldorado e Idea! Sistemas Electrónicos, previeron que en un futuro cercano habría un sistema de distribución abierto para DTV de alta definición por satélite en Brasil. Con base en eso, el Instituto de Investigación Eldorado decidió que sería necesario crear un nuevo ASIC para la recepción de radiodifusión por satélite, basada el estándar DVB-S2. En esta tesis se analiza en detalle la Arquitectura y algoritmos propuestos para la implementación de un receptor ISDB-T de baja complejidad y frecuencia intermedia (IF) en un Circuito Integrado de Aplicación Específica (ASIC) CMOS. La arquitectura aquí propuesta se basa fuertemente en el algoritmo Computadora Digital para Rotación de Coordenadas (CORDIC), el cual es un algoritmo simple, eficiente y adecuado para implementaciones VLSI. El receptor hace frente a las deficiencias inherentes a las transmisiones por canales inalámbricos y los cristales del receptor. La tesis también analiza la metodología adoptada y presenta los resultados de la implementación. Por otro lado, la tesis también presenta la arquitectura y los algoritmos para un receptor DVB-S2 dirigido a la implementación en ASIC. Sin embargo, a diferencia del receptor ISDB-T, se introducen sólo los resultados preliminares de implementación en ASIC. Esto se hizo principalmente con el fin de tener una estimación temprana del área del die para demostrar que el proyecto en ASIC es económicamente viable, así como para verificar posibles errores en etapa temprana. Como en el caso de receptor ISDB-T, este receptor se basa fuertemente en el algoritmo CORDIC y fue un prototipado en FPGA. La metodología utilizada para el segundo receptor se deriva de la utilizada para el re[CA] La primera generació de Televisió Digital Terrestre (TDT) ha estat en servici durant més d'una dècada. En 2013, diversos països ja van completar la transició de la radiodifusió de televisió analògica a la digital, i la majoria van ser a Europa. A Amèrica del Sud, després de diversos estudis i assajos, Brasil va adoptar l'estàndard japonés amb algunes innovacions. Japó i Brasil van començar els servicis de Radiodifusió de Televisió Terrestre Digital (DTTB) al desembre de 2003 i al desembre de 2007, respectivament, utilitzant la Radiodifusió Digital amb Servicis Integrats de (ISDB-T), coneguda com a ARIB STD-B31. Al juny de 2005, el Comité de l'Àrea de Tecnologia de la Informació (CATI) del Ministeri de Ciència i Tecnologia i Innovació del Brasil (MCTI) va aprovar la incorporació del programa CI Brasil al Programa Nacional de Microelectrònica (PNM). Els principals objectius de CI Brasil són la qualificació formal dels dissenyadors de circuits integrats, el suport a la creació d'empreses de semiconductors centrades en projectes de circuits integrats dins del Brasil i l'atracció d'empreses de semiconductors centrades en el disseny i desenvolupament de circuits integrats. El treball presentat en esta tesi es va originar en l'impuls únic creat per la combinació del naixement de la televisió digital al Brasil i la creació del programa Brasil CI pel govern brasiler. Sense esta combinació no hauria estat possible realitzar este tipus de projectes a Brasil. Estos projectes han suposat un viatge llarg i costós, tot i que digne científicament i tecnològica, cap a un circuit integrat punter de baixa complexitat per a la TDT brasilera, amb bones perspectives d'economia d'escala perquè a l'inici d'este projecte l'estàndard ISDB-T no va ser adoptat per diversos països, com el DVB-T. Durant el desenvolupament del receptor de ISDB-T proposat en esta tesi, va resultar que, a causa de les dimensions continentals de Brasil, la DTTB no seria suficient per cobrir tot el país amb el senyal de TDT oberta, especialment pel que fa a les localitzacions remotes allunyades de les regions d'alta densitat urbana.. En este moment, l'Institut de Recerca Eldorado i Idea! Sistemes Electrònics van preveure que, en un futur pròxim, no hi hauria a Brasil un sistema de distribució oberta de TDT d'alta definició a través de satèl¿lit. D'acord amb això, l'Institut de Recerca Eldorado va decidir que seria necessari crear un nou ASIC per a la recepció de radiodifusió per satèl¿lit. basat en l'estàndard DVB-S2. En esta tesi s'analitza en detall l'arquitectura i els algorismes proposats per l'execució d'un receptor ISDB-T de Freqüència Intermèdia (FI) de baixa complexitat sobre CMOS de Circuit Integrat d'Aplicacions Específiques (ASIC). L'arquitectura ací proposada es basa molt en l'algorisme de l'Ordinador Digital de Rotació de Coordenades (CORDIC), que és un algorisme simple i eficient adequat per implementacions VLSI. El receptor fa front a les deficiències inherents a la transmissió de canals sense fil i els cristalls del receptor. Esta tesi també analitza la metodologia adoptada i presenta els resultats de l'execució. Es presenta el rendiment del receptor i es compara amb els obtinguts per mitjà de simulacions. D'altra banda, esta tesi també presenta l'arquitectura i els algorismes d'un receptor de DVB-S2 de cara a la seua implementació en ASIC. No obstant això, a diferència del receptor ISDB-T, només s'introdueixen resultats preliminars d'implementació en ASIC. Això es va fer principalment amb la finalitat de tenir una estimació primerenca de la zona de dau per demostrar que el projecte en ASIC és econòmicament viable, així com per verificar possibles errors en l'etapa primerenca. Com en el cas del receptor ISDB-T, este receptor es basa molt en l'algorisme CORDIC i va ser un prototip de FPGA. La metodologia utilitzada per al segon receptor es deriva de la utilitzada per al receptor IRodrigues De Lima, E. (2016). Architecture and algorithms for the implementation of digital wireless receivers in FPGA and ASIC: ISDB-T and DVB-S2 cases [Tesis doctoral no publicada]. Universitat Politècnica de València. https://doi.org/10.4995/Thesis/10251/61967TESI

Solutions for New Terrestrial Broadcasting Systems Offering Simultaneously Stationary and Mobile Services

221 p.[EN]Since the first broadcasted TV signal was transmitted in the early decades of the past century, the television broadcasting industry has experienced a series of dramatic changes. Most recently, following the evolution from analogue to digital systems, the digital dividend has become one of the main concerns of the broadcasting industry. In fact, there are many international spectrum authorities reclaiming part of the broadcasting spectrum to satisfy the growing demand of other services, such as broadband wireless services, arguing that the TV services are not very spectrum-efficient. Apart from that, it must be taken into account that, even if up to now the mobile broadcasting has not been considered a major requirement, this will probably change in the near future. In fact, it is expected that the global mobile data traffic will increase 11-fold between 2014 and 2018, and what is more, over two thirds of the data traffic will be video stream by the end of that period. Therefore, the capability to receive HD services anywhere with a mobile device is going to be a mandatory requirement for any new generation broadcasting system. The main objective of this work is to present several technical solutions that answer to these challenges. In particular, the main questions to be solved are the spectrum efficiency issue and the increasing user expectations of receiving high quality mobile services. In other words, the main objective is to provide technical solutions for an efficient and flexible usage of the terrestrial broadcasting spectrum for both stationary and mobile services. The first contributions of this scientific work are closely related to the study of the mobile broadcast reception. Firstly, a comprehensive mathematical analysis of the OFDM signal behaviour over time-varying channels is presented. In order to maximize the channel capacity in mobile environments, channel estimation and equalization are studied in depth. First, the most implemented equalization solutions in time-varying scenarios are analyzed, and then, based on these existing techniques, a new equalization algorithm is proposed for enhancing the receivers’ performance. An alternative solution for improving the efficiency under mobile channel conditions is treating the Inter Carrier Interference as another noise source. Specifically, after analyzing the ICI impact and the existing solutions for reducing the ICI penalty, a new approach based on the robustness of FEC codes is presented. This new approach employs one dimensional algorithms at the receiver and entrusts the ICI removing task to the robust forward error correction codes. Finally, another major contribution of this work is the presentation of the Layer Division Multiplexing (LDM) as a spectrum-efficient and flexible solution for offering stationary and mobile services simultaneously. The comprehensive theoretical study developed here verifies the improved spectrum efficiency, whereas the included practical validation confirms the feasibility of the system and presents it as a very promising multiplexing technique, which will surely be a strong candidate for the next generation broadcasting services.[ES]Desde el comienzo de la transmisión de las primeras señales de televisión a principios del siglo pasado, la radiodifusión digital ha evolucionado gracias a una serie de cambios relevantes. Recientemente, como consecuencia directa de la digitalización del servicio, el dividendo digital se ha convertido en uno de los caballos de batalla de la industria de la radiodifusión. De hecho, no son pocos los consorcios internacionales que abogan por asignar parte del espectro de radiodifusión a otros servicios como, por ejemplo, la telefonía móvil, argumentado la poca eficiencia espectral de la tecnología de radiodifusión actual. Asimismo, se debe tener en cuenta que a pesar de que los servicios móviles no se han considerado fundamentales en el pasado, esta tendencia probablemente variará en el futuro cercano. De hecho, se espera que el tráfico derivado de servicios móviles se multiplique por once entre los años 2014 y 2018; y lo que es más importante, se pronostica que dos tercios del tráfico móvil sea video streaming para finales de ese periodo. Por lo tanto, la posibilidad de ofrecer servicios de alta definición en dispositivos móviles es un requisito fundamental para los sistemas de radiodifusión de nueva generación. El principal objetivo de este trabajo es presentar soluciones técnicas que den respuesta a los retos planteados anteriormente. En particular, las principales cuestiones a resolver son la ineficiencia espectral y el incremento de usuarios que demandan mayor calidad en los contenidos para dispositivos móviles. En pocas palabras, el principal objetivo de este trabajo se basa en ofrecer una solución más eficiente y flexible para la transmisión simultánea de servicios fijos y móviles. La primera contribución relevante de este trabajo está relacionada con la recepción de la señal de televisión en movimiento. En primer lugar, se presenta un completo análisis matemático del comportamiento de la señal OFDM en canales variantes con el tiempo. A continuación, con la intención de maximizar la capacidad del canal, se estudian en profundidad los algoritmos de estimación y ecualización. Posteriormente, se analizan los algoritmos de ecualización más implementados, y por último, basándose en estas técnicas, se propone un nuevo algoritmo de ecualización para aumentar el rendimiento de los receptores en tales condiciones. Del mismo modo, se plantea un nuevo enfoque para mejorar la eficiencia de los servicios móviles basado en tratar la interferencia entre portadoras como una fuente de ruido. Concretamente, tras analizar el impacto del ICI en los receptores actuales, se sugiere delegar el trabajo de corrección de dichas distorsiones en códigos FEC muy robustos. Finalmente, la última contribución importante de este trabajo es la presentación de la tecnología LDM como una manera más eficiente y flexible para la transmisión simultánea de servicios fijos y móviles. El análisis teórico presentado confirma el incremento en la eficiencia espectral, mientras que el estudio práctico valida la posible implementación del sistema y presenta la tecnología LDM c

Design and Analysis of Forward Error Control Coding and Signaling for Guaranteeing QoS in Wireless Broadcast Systems

Broadcasting systems are networks where the transmission is received by several terminals. Generally broadcast receivers are passive devices in the network, meaning that they do not interact with the transmitter. Providing a certain Quality of Service (QoS) for the receivers in heterogeneous reception environment with no feedback is not an easy task. Forward error control coding can be used for protection against transmission errors to enhance the QoS for broadcast services. For good performance in terrestrial wireless networks, diversity should be utilized. The diversity is utilized by application of interleaving together with the forward error correction codes. In this dissertation the design and analysis of forward error control and control signalling for providing QoS in wireless broadcasting systems are studied. Control signaling is used in broadcasting networks to give the receiver necessary information on how to connect to the network itself and how to receive the services that are being transmitted. Usually control signalling is considered to be transmitted through a dedicated path in the systems. Therefore, the relationship of the signaling and service data paths should be considered early in the design phase. Modeling and simulations are used in the case studies of this dissertation to study this relationship. This dissertation begins with a survey on the broadcasting environment and mechanisms for providing QoS therein. Then case studies present analysis and design of such mechanisms in real systems. The mechanisms for providing QoS considering signaling and service data paths and their relationship at the DVB-H link layer are analyzed as the first case study. In particular the performance of different service data decoding mechanisms and optimal signaling transmission parameter selection are presented. The second case study investigates the design of signaling and service data paths for the more modern DVB-T2 physical layer. Furthermore, by comparing the performances of the signaling and service data paths by simulations, configuration guidelines for the DVB-T2 physical layer signaling are given. The presented guidelines can prove useful when configuring DVB-T2 transmission networks. Finally, recommendations for the design of data and signalling paths are given based on findings from the case studies. The requirements for the signaling design should be derived from the requirements for the main services. Generally, these requirements for signaling should be more demanding as the signaling is the enabler for service reception.Siirretty Doriast