Channel Sounding for the Masses: Low Complexity GNU 802.11b Channel Impulse Response Estimation

New techniques in cross-layer wireless networks are building demand for ubiquitous channel sounding, that is, the capability to measure channel impulse response (CIR) with any standard wireless network and node. Towards that goal, we present a software-defined IEEE 802.11b receiver and CIR estimation system with little additional computational complexity compared to 802.11b reception alone. The system implementation, using the universal software radio peripheral (USRP) and GNU Radio, is described and compared to previous work. By overcoming computational limitations and performing direct-sequence spread-spectrum (DS-SS) matched filtering on the USRP, we enable high-quality yet inexpensive CIR estimation. We validate the channel sounder and present a drive test campaign which measures hundreds of channels between WiFi access points and an in-vehicle receiver in urban and suburban areas

Factors affecting the bit error rate performance of the indoor radio propagation channel for 2.3-2.5 GHz frequency band

The use of wireless in buildings based on microwave radio technology has recently become a viable alternative to the traditional wired transmission media. Because of the portable nature of radio transceivers, the need for extensive cabling of buildings with either twisted pair, coaxial, or optical fibre cable is eliminated. This is particularly desirable where high user mobility occurs and existing wiring is not in place, or buildings are heritage in nature and extensive cabling is seen as intrusive. Economic analysis bas also shown that significant labour cost savings can result by using a radio system or a hybrid mix of cable and radio for personal communication. The use of wireless systems within buildings introduces a new physical radio wave propagation medium, namely the indoor radio propagation channel. This physical medium has significantly different characteristics to some of the other forms of radio channels where elevated antennas, longer propagation path distances, and often minimally obstructed paths between transmit and receive antenna are common. Radio waves transmitted over the indoor channel at microwave frequencies behave much like light rays, they are blocked, scattered, and reflected by objects in the environment. As a direct result of this several phenomena unique to this form of physical medium become apparent, and they must be accounted for in the design and modelling of the indoor radio propagation channel transmission performance. In this thesis we analyse and characterise the indoor radio channel as a physical medium for data transmission. The research focuses on the influence of the radio physics aspects of an indoor microwave channel on the data transmission quality. We identify the associated statistical error performance for both time varying and temporally stationary indoor channels. Together with the theoretical analysis of the channel, a series of propagation measurements within buildings are completed to permit empirical validation of the theoretical predictions of how the indoor microwave channel should perform. The measurements are performed in the frequency range 2.3-2.5 GHz, which includes the 2.4-2.4835 GHz band allocated by spectrum management authorities for industrial scientific and medical radio use, (ISM band). As a direct result of our measurements, statistics related to channel noise, fading, and impulse response for the indoor microwave channel are obtained. The relationship between data transmission error statistics and the aforementioned phenomena is quantified and statistically analysed for the indoor radio channel and phase shift keyed (PSK) modulation. The results obtained from this research provide input data for the development of a simulation model of an indoor wireless mobile channel. Our measurements identify microwave ovens as a channel noise source of sufficient magnitude to corrupt data transmission in the ISM band, and an in depth analysis of the effect of noise emissions from operational microwave ovens on PSK modulation is presented in this thesis. As a result of this analysis, the estimated data error rates are calculated. Channel fading measurements provide results that will be used as the input data for the design of antennas for use on the indoor microwave channel. We also show that a data rate of eight megabits/second is possible over the typical indoor radio channel, with no requirement for adaptive delay equalisation to counter multipath signal delay spread

PACKET ERROR RATE PREDICTIVE MODEL FOR SENSOR RADIOS ON FAST ROTATING STRUCTURES

Wireless sensing technologies have raised widespread interests in the applications for monitoring fast rotating or moving machinery structures in manufacturing environments. Over the past five years, a few wireless sensor systems have been implemented and proven to feasibly work under fast rotation conditions. However, few of these studies evaluated data transmission performance of the wireless communication systems. Although the manufacturing environments are known to be harsh for wireless communication, in many cases, an excellent data throughput is critical for such systems. Conventional statistical methods for studying wireless communication channels are not sufficient in this specific field. This dissertation presents systematic experiments to understand and characterize the behavior of a 2.4 GHz band wireless channel between a fast rotating transmitter and a stationary data receiver. The experiments prove, in manufacturing machines, multipath propagation induced by metallic objects causes high power attenuation of radio signals during transmitter motion, and the consequence, low received signal power, is recognized as the major cause of transmission errors. The dissertation proposes a deterministic packet error rate (PER) predictive model for rotating wireless measuring systems using IEEE 802.15.4 sensor radios. The model consists of three sub-models that predict power attenuation, bit error rate (BER), and PER in three stages for given specifications regarding environment, radio transmission, and rotation. The dissertation provides experimental validation of the sub-models and discusses their limitations and prediction errors. By either experiments or simulations, two data transmission protocols, automatic retransmission request (ARQ) method and online error avoidance algorithm, are proved efficient for a reliable wireless communication of such sensor radios. As the first effort to characterize and model such radio channels, the dissertation provides in-depth understandings of the channels\u27 fast varying behavior, achieves prediction guidance for the channels\u27 communication performance, and introduces prospective transmission protocols for performance enhancement

Doctor of Philosophy

dissertationThe wireless radio channel is typically thought of as a means to move information from transmitter to receiver, but the radio channel can also be used to detect changes in the environment of the radio link. This dissertation is focused on the measurements we can make at the physical layer of wireless networks, and how we can use those measurements to obtain information about the locations of transceivers and people. The first contribution of this work is the development and testing of an open source, 802.11b sounder and receiver, which is capable of decoding packets and using them to estimate the channel impulse response (CIR) of a radio link at a fraction of the cost of traditional channel sounders. This receiver improves on previous implementations by performing optimized matched filtering on the field-programmable gate array (FPGA) of the Universal Software Radio Peripheral (USRP), allowing it to operate at full bandwidth. The second contribution of this work is an extensive experimental evaluation of a technology called location distinction, i.e., the ability to identify changes in radio transceiver position, via CIR measurements. Previous location distinction work has focused on single-input single-output (SISO) radio links. We extend this work to the context of multiple-input multiple-output (MIMO) radio links, and study system design trade-offs which affect the performance of MIMO location distinction. The third contribution of this work introduces the "exploiting radio windows" (ERW) attack, in which an attacker outside of a building surreptitiously uses the transmissions of an otherwise secure wireless network inside of the building to infer location information about people inside the building. This is possible because of the relative transparency of external walls to radio transmissions. The final contribution of this dissertation is a feasibility study for building a rapidly deployable radio tomographic (RTI) imaging system for special operations forces (SOF). We show that it is possible to obtain valuable tracking information using as few as 10 radios over a single floor of a typical suburban home, even without precise radio location measurements

Direct Antenna Modulation using Frequency Selective Surfaces

In the coming years, the number of connected wireless devices will increase dramatically, expanding the Internet of Things (IoT). It is likely that much of this capacity will come from network densification. However, base stations are inefficient and expensive, particularly the downlink transmitters. The main cause of this is the power amplifier (PA), which must amplify complex signals, so are expensive and often only 30% efficient. As such, the cost of densifying cellular networks is high. This thesis aims to overcome this problem through codesign of a low complexity, energy efficient transmitter through electromagnetic design; and a waveform which leverages the advantages and mitigates the disadvantages of the new technology, while being suitable for supporting IoT devices. Direct Antenna Modulation (DAM) is a low complexity transmitter architecture, where modulation occurs at the antenna at transmit power. This means a non-linear PA can efficiently amplify the carrier wave without added distortion. Frequency Selective Surfaces (FSS) are presented here as potential phase modulators for DAM transmitters. The theory of operation is discussed, and a prototype DAM for QPSK modulation is simulated, designed and tested. Next, the design process for a continuous phase modulating antenna is explored. Simulations and measurement are used to fully characterise a prototype, and it is implemented in a line-of-sight end-to-end communications system, demonstrating BPSK, QPSK and 8-PSK. Due to the favourable effects of spread spectrum signalling on FSS DAM performance, Cyclic Prefix Direct Sequence Spread Spectrum (CPDSSS) is developed. Conventional spreading techniques are extended using a cyclic prefix, making multipath interference entirely defined by the periodic autocorrelation of the sequence used. This is demonstrated analytically, through simulation and with experiments. Finally, CPDSSS is implemented using FSS DAM, demonstrating the potential of this new low cost, low complexity transmitter with CPDSSS as a scalable solution to IoT connectivity

Power control for WCDMA

This project tries to introduce itself in the physical implementations that make possible the denominated third generation mobile technology. As well as to know the technology kind that makes possible, for example, a video-call in real time. During this project, the different phases passed from the election of WCDMA like the access method for UMTS will appear. Its coexistence with previous network GSM will be analyzed, where the compatibility between systems has been one of the most important aspects in the development of WCDMA, the involved standardization organisms in the process, as well as the different protocols that make the mobile communications within a network UTRAN possible. Special emphasis during the study of the great contribution that has offered WCDMA with respect to the control of power of the existing signals will be made. The future lines that are considered in the present, and other comment that already are in their last phase of development in the field of the mobile technology. UMTS through WCDMA can be summarized like a revolution of the air interface accompanied by a revolution in the network of their architecture

Multipath/modulation study for the tracking and data relay satellite system Final report, 14 Apr. 1969 - 12 Jan. 1970

Multipath modulation study of tracking and data relay satellite syste

1-D broadside-radiating leaky-wave antenna based on a numerically synthesized impedance surface

A newly-developed deterministic numerical technique for the automated design of metasurface antennas is applied here for the first time to the design of a 1-D printed Leaky-Wave Antenna (LWA) for broadside radiation. The surface impedance synthesis process does not require any a priori knowledge on the impedance pattern, and starts from a mask constraint on the desired far-field and practical bounds on the unit cell impedance values. The designed reactance surface for broadside radiation exhibits a non conventional patterning; this highlights the merit of using an automated design process for a design well known to be challenging for analytical methods. The antenna is physically implemented with an array of metal strips with varying gap widths and simulation results show very good agreement with the predicted performance