Order Scheduling with Tardiness Objective: Improved Approximate Solutions

The problem addressed in this paper belongs to the topic of order scheduling, in which customer orders --composed of different individual jobs-- are scheduled so the objective sought refers to the completion times of the complete orders. Despite the practical and theoretical relevance of this problem, the literature on order scheduling is not very abundant as compared to job scheduling. However, there are several contributions with the objectives of minimising the weighted sum of completion times of the orders, the number of late orders, or the total tardiness of the orders. In this paper, we focus in the last objective, which is known to be NP-hard and for which some constructive heuristics have been proposed. We intend to improve this state-of-the-art regarding approximate solutions by proposing two different methods: Whenever extremely fast (negligible time) solutions are required, we propose a new constructive heuristic that incorporates a look-ahead mechanism to estimate the objective function at the time that the solution is being built. For the scenarios where longer decision intervals are allowed, we propose a novel matheuristic strategy to provide extremely good solutions. The extensive computational experience carried out shows that the two proposals are the most efficient for the indicated scenarios

Deterministic Assembly Scheduling Problems: A Review and Classification of Concurrent-Type Scheduling Models and Solution Procedures

Many activities in industry and services require the scheduling of tasks that can be concurrently executed, the most clear example being perhaps the assembly of products carried out in manufacturing. Although numerous scientific contributions have been produced on this area over the last decades, the wide extension of the problems covered and the lack of a unified approach have lead to a situation where the state of the art in the field is unclear, which in turn hinders new research and makes translating the scientific knowledge into practice difficult. In this paper we propose a unified notation for assembly scheduling models that encompass all concurrent-type scheduling problems. Using this notation, the existing contributions are reviewed and classified into a single framework, so a comprehensive, unified picture of the field is obtained. In addition, a number of conclusions regarding the state of the art in the topic are presented, as well as some opportunities for future research.Ministerio de Ciencia e Innovación español DPI2016-80750-

Application of lean scheduling and production control in non-repetitive manufacturing systems using intelligent agent decision support

This thesis was submitted for the degree of Doctor of Philosophy and awarded by Brunel University.Lean Manufacturing (LM) is widely accepted as a world-class manufacturing paradigm, its currency and superiority are manifested in numerous recent success stories. Most lean tools including Just-in-Time (JIT) were designed for repetitive serial production systems. This resulted in a substantial stream of research which dismissed a priori the suitability of LM for non-repetitive non-serial job-shops. The extension of LM into non-repetitive production systems is opposed on the basis of the sheer complexity of applying JIT pull production control in non-repetitive systems fabricating a high variety of products. However, the application of LM in job-shops is not unexplored. Studies proposing the extension of leanness into non-repetitive production systems have promoted the modification of pull control mechanisms or reconfiguration of job-shops into cellular manufacturing systems. This thesis sought to address the shortcomings of the aforementioned approaches. The contribution of this thesis to knowledge in the field of production and operations management is threefold: Firstly, a Multi-Agent System (MAS) is designed to directly apply pull production control to a good approximation of a real-life job-shop. The scale and complexity of the developed MAS prove that the application of pull production control in non-repetitive manufacturing systems is challenging, perplex and laborious. Secondly, the thesis examines three pull production control mechanisms namely, Kanban, Base Stock and Constant Work-in-Process (CONWIP) which it enhances so as to prevent system deadlocks, an issue largely unaddressed in the relevant literature. Having successfully tested the transferability of pull production control to non-repetitive manufacturing, the third contribution of this thesis is that it uses experimental and empirical data to examine the impact of pull production control on job-shop performance. The thesis identifies issues resulting from the application of pull control in job-shops which have implications for industry practice and concludes by outlining further research that can be undertaken in this direction

Available-to-promise (ATP) systems: a classification and framework for analysis

Available-to-promise (ATP) systems deal with a number of managerial decisions related to order capture activities in a company, including order acceptance/rejection, due date setting, and resource scheduling. These different but interrelated decisions have often been studied in an isolated manner, and, to the best of our knowledge, no framework has been presented to integrate them into the broader perspective of order capture. This paper attempts to provide a general framework for ATP-related decisions. By doing so, we: (1) identify the different decision problems to be addressed; (2) present the different literature-based models supporting related decisions into a coherent framework; and (3) review the main contributions in the literature for each one of these. We first describe different approaches for order capture available in the literature, depending on two parameters related to the application context of ATP systems, namely the inclusion of explicit information about due dates in the decision model, and the level of integration among decisions. According to these parameters, up to six approaches for ATP-related decisions are identified. Secondly, we show the subsequent decision problems derived from the different approaches, and describe the main issues and key references involving each one of these decision problems. Finally, a number of conclusions and future research lines are discussed.Ministerio de Ciencia e Innovación DPI2007-6134

Energy-aware coordination of machine scheduling and support device recharging in production systems

Electricity generation from renewable energy sources is crucial for achieving climate targets, including greenhouse gas neutrality. Germany has made significant progress in increasing renewable energy generation. However, feed-in management actions have led to losses of renewable electricity in the past years, primarily from wind energy. These actions aim to maintain grid stability but result in excess renewable energy that goes unused. The lost electricity could have powered a multitude of households and saved CO2 emissions. Moreover, feed-in management actions incurred compensation claims of around 807 million Euros in 2021. Wind-abundant regions like Schleswig-Holstein are particularly affected by these actions, resulting in substantial losses of renewable electricity production. Expanding the power grid infrastructure is a costly and time-consuming solution to avoid feed-in management actions. An alternative approach is to increase local electricity consumption during peak renewable generation periods, which can help balance electricity supply and demand and reduce feed-in management actions. The dissertation focuses on energy-aware manufacturing decision-making, exploring ways to counteract feed-in management actions by increasing local industrial consumption during renewable generation peaks. The research proposes to guide production management decisions, synchronizing a company's energy consumption profile with renewable energy availability for more environmentally friendly production and improved grid stability

Evolutionary methods for the design of dispatching rules for complex and dynamic scheduling problems

Three methods, based on Evolutionary Algorithms (EAs), to support and automate the design of dispatching rules for complex and dynamic scheduling problems are proposed in this thesis. The first method employs an EA to search for problem instances on which a given dispatching rule performs badly. These instances can then be analysed to reveal weaknesses of the tested rule, thereby providing guidelines for the design of a better rule. The other two methods are hyper-heuristics, which employ an EA directly to generate effective dispatching rules. In particular, one hyper-heuristic is based on a specific type of EA, called Genetic Programming (GP), and generates a single rule from basic job and machine attributes, while the other generates a set of work centre-specific rules by selecting a (potentially) different rule for each work centre from a number of existing rules. Each of the three methods is applied to some complex and dynamic scheduling problem(s), and the resulting dispatching rules are tested against benchmark rules from the literature. In each case, the benchmark rules are shown to be outperformed by a rule (set) that results from the application of the respective method, which demonstrates the effectiveness of the proposed methods

Models and Algorithms for the Optimisation of Replenishment, Production and Distribution Plans in Industrial Enterprises

Tesis por compendio[ES] La optimización en las empresas manufactureras es especialmente importante, debido a las grandes inversiones que realizan, ya que a veces estas inversiones no obtienen el rendimiento esperado porque los márgenes de beneficio de los productos son muy ajustados. Por ello, las empresas tratan de maximizar el uso de los recursos productivos y financieros minimizando el tiempo perdido y, al mismo tiempo, mejorando los flujos de los procesos y satisfaciendo las necesidades del mercado. El proceso de planificación es una actividad crítica para las empresas. Esta tarea implica grandes retos debido a los cambios del mercado, las alteraciones en los procesos de producción dentro de la empresa y en la cadena de suministro, y los cambios en la legislación, entre otros. La planificación del aprovisionamiento, la producción y la distribución desempeña un papel fundamental en el rendimiento de las empresas manufactureras, ya que una planificación ineficaz de los proveedores, los procesos de producción y los sistemas de distribución contribuye a aumentar los costes de los productos, a alargar los plazos de entrega y a reducir los beneficios. La planificación eficaz es un proceso complejo que abarca una amplia gama de actividades para garantizar que los equipos, los materiales y los recursos humanos estén disponibles en el momento y el lugar adecuados. Motivados por la complejidad de la planificación en las empresas manufactureras, esta tesis estudia y desarrolla herramientas cuantitativas para ayudar a los planificadores en los procesos de la planificación del aprovisionamiento, producción y distribución. Desde esta perspectiva, se proponen modelos realistas y métodos eficientes para apoyar la toma de decisiones en las empresas industriales, principalmente en las pequeñas y medianas empresas (PYMES). Las aportaciones de esta tesis suponen un avance científico basado en una exhaustiva revisión bibliográfica sobre la planificación del aprovisionamiento, la producción y la distribución que ayuda a comprender los principales modelos y algoritmos utilizados para resolver estos planes, y pone en relieve las tendencias y las futuras direcciones de investigación. También proporciona un marco holístico para caracterizar los modelos y algoritmos centrándose en la planificación de la producción, la programación y la secuenciación. Esta tesis también propone una herramienta de apoyo a la decisión para seleccionar un algoritmo o método de solución para resolver problemas concretos de la planificación del aprovisionamiento, producción y distribución en función de su complejidad, lo que permite a los planificadores no duplicar esfuerzos de modelización o programación de técnicas de solución. Por último, se desarrollan nuevos modelos matemáticos y enfoques de solución de última generación, como los algoritmos matheurísticos, que combinan la programación matemática y las técnicas metaheurísticas. Los nuevos modelos y algoritmos comprenden mejoras en términos de rendimiento computacional, e incluyen características realistas de los problemas del mundo real a los que se enfrentan las empresas de fabricación. Los modelos matemáticos han sido validados con un caso de una importante empresa del sector de la automoción en España, lo que ha permitido evaluar la relevancia práctica de estos novedosos modelos utilizando instancias de gran tamaño, similares a las existentes en la empresa objeto de estudio. Además, los algoritmos matheurísticos han sido probados utilizando herramientas libres y de código abierto. Esto también contribuye a la práctica de la investigación operativa, y proporciona una visión de cómo desplegar estos métodos de solución y el tiempo de cálculo y rendimiento de la brecha que se puede obtener mediante el uso de software libre o de código abierto.[CA] L'optimització a les empreses manufactureres és especialment important, a causa de les grans inversions que realitzen, ja que de vegades aquestes inversions no obtenen el rendiment esperat perquè els marges de benefici dels productes són molt ajustats. Per això, les empreses intenten maximitzar l'ús dels recursos productius i financers minimitzant el temps perdut i, alhora, millorant els fluxos dels processos i satisfent les necessitats del mercat. El procés de planificació és una activitat crítica per a les empreses. Aquesta tasca implica grans reptes a causa dels canvis del mercat, les alteracions en els processos de producció dins de l'empresa i la cadena de subministrament, i els canvis en la legislació, entre altres. La planificació de l'aprovisionament, la producció i la distribució té un paper fonamental en el rendiment de les empreses manufactureres, ja que una planificació ineficaç dels proveïdors, els processos de producció i els sistemes de distribució contribueix a augmentar els costos dels productes, allargar els terminis de lliurament i reduir els beneficis. La planificació eficaç és un procés complex que abasta una àmplia gamma d'activitats per garantir que els equips, els materials i els recursos humans estiguen disponibles al moment i al lloc adequats. Motivats per la complexitat de la planificació a les empreses manufactureres, aquesta tesi estudia i desenvolupa eines quantitatives per ajudar als planificadors en els processos de la planificació de l'aprovisionament, producció i distribució. Des d'aquesta perspectiva, es proposen models realistes i mètodes eficients per donar suport a la presa de decisions a les empreses industrials, principalment a les petites i mitjanes empreses (PIMES). Les aportacions d'aquesta tesi suposen un avenç científic basat en una exhaustiva revisió bibliogràfica sobre la planificació de l'aprovisionament, la producció i la distribució que ajuda a comprendre els principals models i algorismes utilitzats per resoldre aquests plans, i posa de relleu les tendències i les futures direccions de recerca. També proporciona un marc holístic per caracteritzar els models i algorismes centrant-se en la planificació de la producció, la programació i la seqüenciació. Aquesta tesi també proposa una eina de suport a la decisió per seleccionar un algorisme o mètode de solució per resoldre problemes concrets de la planificació de l'aprovisionament, producció i distribució en funció de la seua complexitat, cosa que permet als planificadors no duplicar esforços de modelització o programació de tècniques de solució. Finalment, es desenvolupen nous models matemàtics i enfocaments de solució d'última generació, com ara els algoritmes matheurístics, que combinen la programació matemàtica i les tècniques metaheurístiques. Els nous models i algoritmes comprenen millores en termes de rendiment computacional, i inclouen característiques realistes dels problemes del món real a què s'enfronten les empreses de fabricació. Els models matemàtics han estat validats amb un cas d'una important empresa del sector de l'automoció a Espanya, cosa que ha permés avaluar la rellevància pràctica d'aquests nous models utilitzant instàncies grans, similars a les existents a l'empresa objecte d'estudi. A més, els algorismes matheurístics han estat provats utilitzant eines lliures i de codi obert. Això també contribueix a la pràctica de la investigació operativa, i proporciona una visió de com desplegar aquests mètodes de solució i el temps de càlcul i rendiment de la bretxa que es pot obtindre mitjançant l'ús de programari lliure o de codi obert.[EN] Optimisation in manufacturing companies is especially important, due to the large investments they make, as sometimes these investments do not obtain the expected return because the profit margins of products are very tight. Therefore, companies seek to maximise the use of productive and financial resources by minimising lost time and, at the same time, improving process flows while meeting market needs. The planning process is a critical activity for companies. This task involves great challenges due to market changes, alterations in production processes within the company and in the supply chain, and changes in legislation, among others. Planning of replenishment, production and distribution plays a critical role in the performance of manufacturing companies because ineffective planning of suppliers, production processes and distribution systems contributes to higher product costs, longer lead times and less profits. Effective planning is a complex process that encompasses a wide range of activities to ensure that equipment, materials and human resources are available in the right time and the right place. Motivated by the complexity of planning in manufacturing companies, this thesis studies and develops quantitative tools to help planners in the replenishment, production and delivery planning processes. From this perspective, realistic models and efficient methods are proposed to support decision making in industrial companies, mainly in small- and medium-sized enterprises (SMEs). The contributions of this thesis represent a scientific breakthrough based on a comprehensive literature review about replenishment, production and distribution planning that helps to understand the main models and algorithms used to solve these plans, and highlights trends and future research directions. It also provides a holistic framework to characterise models and algorithms by focusing on production planning, scheduling and sequencing. This thesis also proposes a decision support tool for selecting an algorithm or solution method to solve concrete replenishment, production and distribution planning problems according to their complexity, which allows planners to not duplicate efforts modelling or programming solution techniques. Finally, new state-of-the-art mathematical models and solution approaches are developed, such as matheuristic algorithms, which combine mathematical programming and metaheuristic techniques. The new models and algorithms comprise improvements in computational performance terms, and include realistic features of real-world problems faced by manufacturing companies. The mathematical models have been validated with a case of an important company in the automotive sector in Spain, which allowed to evaluate the practical relevance of these novel models using large instances, similarly to those existing in the company under study. In addition, the matheuristic algorithms have been tested using free and open-source tools. This also helps to contribute to the practice of operations research, and provides insight into how to deploy these solution methods and the computational time and gap performance that can be obtained by using free or open-source software.This work would not have been possible without the following funding sources: Conselleria de Educación, Investigación, Cultura y Deporte, Generalitat Valenciana for hiring predoctoral research staff with Grant (ACIF/2018/170) and the European Social Fund with the Grant Operational Programme of FSE 2014-2020. Conselleria de Educación, Investigación, Cultura y Deporte, Generalitat Valenciana for predoctoral contract students to stay in research centers outside the research centers outside the Valencian Community (BEFPI/2021/040) and the European Social Fund.Guzmán Ortiz, BE. (2022). Models and Algorithms for the Optimisation of Replenishment, Production and Distribution Plans in Industrial Enterprises [Tesis doctoral]. Universitat Politècnica de València. https://doi.org/10.4995/Thesis/10251/187461Compendi

Aproximações heurísticas para um problema de escalonamento do tipo flexible job-shop

Mestrado em Engenharia e Gestão IndustrialEste trabalho aborda um novo tipo de problema de escalonamento que pode ser encontrado em várias aplicações do mundo-real, principalmente na indústria transformadora. Em relação à configuração do shop floor, o problema pode ser classificado como flexible job-shop, onde os trabalhos podem ter diferentes rotas ao longo dos recursos e as suas operações têm um conjunto de recursos onde podem ser realizadas. Outras características de processamento abordadas são: datas possíveis de início, restrições de precedência (entre operações de um mesmo trabalho ou entre diferentes trabalhos), capacidade dos recursos (incluindo paragens, alterações na capacidade e capacidade infinita) e tempos de setup (que podem ser dependentes ou independentes da sequência). O objetivo é minimizar o número total de trabalhos atrasados. Para resolver o novo problema de escalonamento proposto um modelo de programação linear inteira mista é apresentado e novas abordagens heurísticas são propostas. Duas heurísticas construtivas, cinco heurísticas de melhoramento e duas metaheurísticas são propostas. As heurísticas construtivas são baseadas em regras de ordenação simples, onde as principais diferenças entre elas dizem respeito às regras de ordenação utilizadas e à forma de atribuir os recursos às operações. Os métodos são designados de job-by-job (JBJ), operation-by-operation (OBO) e resource-by-resource (RBR). Dentro das heurísticas de melhoramento, a reassign e a external exchange visam alterar a atribuição dos recursos, a internal exchange e a swap pretendem alterar a sequência de operações e a reinsert-reassign é focada em mudar, simultaneamente, ambas as partes. Algumas das heurísticas propostas são usadas em metaheurísticas, nomeadamente a greedy randomized adaptive search procedure (GRASP) e a iterated local search (ILS). Para avaliar estas abordagens, é proposto um novo conjunto de instâncias adaptadas de problemas de escalonamento gerais do tipo flexible job-shop. De todos os métodos, o que apresenta os melhores resultados é o ILS-OBO obtendo melhores valores médios de gaps em tempos médios inferiores a 3 minutos.This work addresses a new type of scheduling problem which can be found in several real-world applications, mostly in manufacturing. Regarding shop floor configuration, the problem can be classified as flexible job-shop, where jobs can have different routes passing through resources and their operations have a set of eligible resources in which they can be performed. The processing characteristics addressed are release dates, precedence constraints (either between operations of the same job or between different jobs), resources capacity (including downtimes, changes in capacity, and infinite capacity), and setup times, which can be sequence-dependent or sequence-independent. The objective is to minimise the total number of tardy jobs. To tackle the newly proposed flexible job-shop scheduling problem (FJSP), a mixed integer linear programming model (MILP) is presented and new heuristic approaches are put forward. Three constructive heuristics, five improvement heuristics, and two metaheuristics are proposed. The constructive heuristics are based on simple dispatching rules, where the main differences among them concern the used dispatching rules and the way resources are assigned. The methods are named job-by-job (JBJ), operation-by-operation (OBO) and resource-by-resource (RBR). Within improvement heuristics, reassign and external exchange aim to change the resources assignment, internal exchange and swap intend changing the operations sequence, and reinsert-reassign is focused in simultaneously changing both parts. Some of the proposed heuristics are used within metaheuristic frameworks, namely greedy randomized adaptive search procedure (GRASP) and iterative local search (ILS). In order to evaluate these approaches, a new set of benchmark instances adapted from the general FJSP is proposed. Out of all methods, the one which shows the best average results is ILS-OBO obtaining the best average gap values in average times lower than 3 minutes