261 research outputs found

    Superchannel transmission over flexible-grid optical networks

    Get PDF
    Superchannels have been proposed as a cost-effective solution to cope with the future data capacity demand in long-haul transport networks. However, in superchannels, the spectrum of the subchannels is tightly packed and the crosstalk between subchannels can become a performance constraint. Along its path in the optical network, a superchannel passes through several reconfigurable optical add-drop multiplexers (ROADMs). The cumulative filtering effect of the cascaded wavelength selective switches (WSSs), inside the ROADMs, reduces the available bandwidth and leads to signal distortion. The subchannels performance is significantly dependent on the intercarrier spacing. If too large, the edge subchannels suffer a higher distortion from the filtering cascade. If too narrow, it creates a considerable intercarrier crosstalk between the subchannels. In this work, we perform the exhaustive assessment of the optical signal-to-noise ratio (OSNR) penalties due to the optical filtering and intercarrier crosstalk between subchannels using different M-ary quadrature amplitude modulation (M-QAM) formats, symbol rates, roll-off factors, number of traversed WSSs, WSS bandwidths, number of subchannels and intercarrier spacing. We provide a procedure to obtain optimized values of these parameters that guarantee an OSNR penalty below 1.5 dB for all subchannels after 20 WSSs. Two WSS filter spectral models are compared, named analytical and super-Gaussian. We have shown the use of the computationally much faster performance metric, the error vector magnitude (EVM) penalty, and concluded that it provides a more pessimistic performance estimate than the OSNR penalty, to estimate the distortion due to the filters cascade.O uso de super-canais tem sido proposto como uma boa relação custo-benefício para suportar a futura procura de capacidade de dados nas redes de transporte a longa distância. Contudo, nos super-canais, o espectro dos sub-canais está muito compactado e a interferência entre sub-canais pode tornar-se uma limitação. Enquanto atravessa a rede óptica, um super-canal passa através de vários multiplexadores ópticos reconfiguráveis de inserção e extracção (ROADMs, em inglês). O efeito acumulado da filtragem de uma cascata de filtros baseados em comutadores selectivos no comprimento-de-onda (WSS em inglês) que se encontram dentro dos ROADMs, reduz a largura-de-banda disponível e causa distorção no sinal óptico. A performance dos sub-canais é significativamente dependente do espaçamento entre sub-canais, da interferência entre sub-canais e da filtragem nos WSS’s. Neste trabalho, avalia-se exaustivamente a penalidade na relação sinal-ruído óptica (OSNR, em inglês) devido a filtragem óptica e interferência entre sub-canais, usando diferentes formatos de modulação M-QAM, ritmos de símbolos, factores de excesso de banda, número de WSS’s, larguras-de-banda dos WSS’s, número de sub-canais e espaçamento entre portadoras. Fornece-se um procedimento para obter valores optimizados para estes parâmetros que garantem que a penalidade na OSNR é menor que 1.5 dB em todos os sub-canais depois de 20 WSS’s. Comparam-se também dois modelos espectrais para o filtro WSS, denominados analítico e super-Gaussiano. Investiga-se o uso da penalidade da EVM, computacionalmente muito mais rápida, como métrica de desempenho e conclui-se que fornece resultados mais pessimistas que a penalidade da OSNR para estimar a distorção da cascata de filtros

    Optical code-division multiple access system and optical signal processing

    Get PDF
    This thesis presents our recent researches on the development of coding devices, the investigation of security and the design of systems in the optical cod-division multiple access (OCDMA) systems. Besides, the techniques of nonlinear signal processing used in the OCDMA systems fire our imagination, thus some researches on all-optical signal processing are carried out and also summarized in this thesis. Two fiber Bragg grating (FBG) based coding devices are proposed. The first coding device is a superstructured FBG (SSFBG) using ±π/2-phase shifts instead of conventional 0/π-phase shifts. The ±π/2-phase-shifted SSFBG en/decoders can not only conceal optical codes well in the encoded signals but also realize the reutilization of available codes by hybrid use with conventional 0/π-phase-shifted SSFBG en/decoders. The second FBG based coding device is synthesized by layer-peeling method, which can be used for simultaneous optical code recognition and chromatic dispersion compensation. Then, two eavesdropping schemes, one-bit delay interference detection and differential detection, are demonstrated to reveal the security vulnerability of differential phase-shift keying (DPSK) and code-shift keying (CSK) OCDMA systems. To address the security issue as well as increase the transmission capacity, an orthogonal modulation format based on DPSK and CSK is introduced into the OCDMA systems. A 2 bit/symbol 10 Gsymbol/s transmission system using the orthogonal modulation format is achieved. The security of the system can be partially guaranteed. Furthermore, a fully-asynchronous gigabit-symmetric OCDMA passive optical network (PON) is proposed, in which a self-clocked time gate is employed for signal regeneration. A remodulation scheme is used in the PON, which let downstream and upstream share the same optical carrier, allowing optical network units source-free. An error-free 4-user 10 Gbit/s/user duplex transmission over 50 km distance is reazlied. A versatile waveform generation scheme is then studied. A theoretical model is established and a waveform prediction algorithm is summarized. In the demonstration, various waveforms are generated including short pulse, trapezoidal, triangular and sawtooth waveforms and doublet pulse. ii In addition, an all-optical simultaneous half-addition and half-subtraction scheme is achieved at an operating rate of 10 GHz by using only two semiconductor optical amplifiers (SOA) without any assist light. Lastly, two modulation format conversion schemes are demonstrated. The first conversion is from NRZ-OOK to PSK-Manchester coding format using a SOA based Mach-Zehnder interferometer. The second conversion is from RZ-DQPSK to RZ-OOK by employing a supercontinuum based optical thresholder

    All-optical Regeneration For Phase-shift Keyed Optical Communication Systems

    Get PDF
    All-optical signal processing techniques for phase-shift keyed (PSK) systems were developed theoretically and demonstrated experimentally. Nonlinear optical effects in fibers, in particular four-wave mixing (FWM) that occurs via the ultra-fast Kerr nonlinearity, offer a flexible framework within which numerous signal processing functions can be accomplished. This research has focused on the regenerative capabilities of various FWM configurations in the context of processing PSK signals. Phase-preserving amplitude regeneration, phase regeneration, and phase-regenerative wavelength conversion are analyzed and demonstrated experimentally. The single-pump phase-conjugation process was used to regenerate RZ-DPSK pulse amplitudes with different input noise distributions, and the impact on output phase characteristics was studied. Experiments revealed a limited range over which amplitude noise could effectively be suppressed without introduction of phase noise, particularly for signals with intensity pattern effects. Phase regeneration requires use of phase-sensitive amplification (PSA), which occurs in nonlinear interferometers when the pump and signal frequencies are degenerate (NI-PSA), or in fiber directly through single-stage (degenerate) or cascaded (non-degenerate) FWM processes. A PSA based on a Sagnac interferometer provided the first experimental demonstration of DPSK phase and amplitude regeneration. The phase-regenerative capabilities of the NI-PSA are limited in practice by intrinsic noise conversion (amplitude to phase noise) and to a lesser extent by the requirement to modulate the pump wave to suppress stimulated Brillouin scattering (SBS). These limitations are relaxed in novel materials with higher SBS thresholds and nonlinearities. Degenerate FWM provides PSA in a traveling-wave configuration that intrinsically suppresses the noise conversion affecting the NI-PSA, while providing stronger phase-matched gain. Experiments confirmed superior phase-regenerative behavior to the NI-PSA with simultaneous reduction of amplitude noise for NRZ-DPSK signals. Phase-regenerative wavelength conversion (PR-WC) provides the regenerative properties of PSA at a new wavelength, and was proposed and demonstrated for the first time in this research. The parallel implementation of two FWM processes, phase-conjugation and frequency conversion, provides two idlers which exhibit interesting and useful regenerative properties. These were investigated theoretically and experimentally. Ideal phase-regenerative behavior is predicted when the contributing FWM processes are equally phase-matched, which can be maintained over any interaction length or wavelength shift provided the pump powers are properly adjusted. Depleted-pump regime PR-WC provides simultaneous phase and amplitude regeneration. Experiments confirmed regenerative behavior for wavelength shifts of the idlers up to 5 nm. Two techniques for phase regeneration of 4-level PSK signals were developed and evaluated. The first is based on parallel operation of PSAs suitable for processing 2-level PSK signals, where phase projection and regeneration are combined to recover the input data. Analysis of this scheme outlined the conditions required for effective phase regeneration and for practical implementation using known PSAs. A novel process based on FWM (parallel phase-conjugation followed by PSA) was developed and analyzed, and demonstrated using numerical simulations. These studies provide a basis for further work in this area

    Semiconductor Optical Amplifiers and mm-Wave Wireless Links for Converged Access Networks

    Get PDF
    Future access networks are converged optical-wireless networks, where fixed-line and wireless services share the same infrastructure. In this book, semiconductor optical amplifiers (SOA) and mm-wave wireless links are investigated, and their use in converged access networks is explored: SOAs compensate losses in the network, and thereby extend the network reach. Millimeter-wave wireless links substitute fiber links when cabling is not economical

    Optical packet networks : enabling innovative switching technologies

    Get PDF
    Les réseaux informatiques avec une grande capacité nécessitent des liaisons de transmission de données rapides et fiables pour prendre en charge les applications web en pleine croissance. Comme le nombre de serveurs interconnectés et la capacité de stockage des médias ne cessent daugmenter, les communications optiques et les technologies de routage sont devenues intéressantes grâce au taux binaire élevé et à lencombrement minimum offert par la fibre optique. Les réseaux optiques à commutation de paquets (OPSNs) offrent une flexibilité accrue dans la gestion de réseau. OPSNs exploitent les convertisseurs de longueur donde accordables (WC) pour minimiser la probabilité de blocage et fournir une allocation dynamique des longueurs donde. Les émetteurs optiques basés sur des sources multi-longueurs donde se présentent comme une solution intéressante en termes de coût, dencombrement et defficacité énergétique par rapport aux autres types de lasers. Les convertisseurs de longueurs donde doivent permettre des taux binaires élevés et une transparence à une grande variété de formats de modulation, tout en offrant une réponse rapide, des niveaux de puissance modérés et un rapport de signal à bruit optique (OSNR) acceptable à la sortie. Plusieurs technologies de conversion de longueur donde ont été proposées dans la littérature. Lutilisation du mélange à quatre ondes (FWM) dans les amplificateurs optiques à semi-conducteurs (SOA) permet lutilisation de faibles niveaux de puissance dentrée et offre une bonne efficacité de conversion ainsi que la possibilité dintégration photonique. Les SOAs offrent donc un excellent compromis par rapport aux autres solutions. Pour couvrir une plus large bande de conversion, nous utilisons le schéma exploitant le FWM avec doubles pompes dans les SOAs. Pour la stabilité de phase, les pompes viennent d’un laser en mode bloqué (QDMLL) qui sert comme source multi-longueurs donde. Deux modes du QDMLL sont sélectionnés par un filtrage accordable et servent comme doubles pompes. Un filtre accordable placé à la sortie du SOA sert à sélectionner le produit du FWM pour le signal final. Nous étudions le convertisseur de longueur donde proposé et comparons sa performance pour différents formats de modulation (modulation dintensité et de phase) et à différents débits binaires (10 et 40 Gbit/s). Le taux derreur binaire, lefficacité de conversion et la mesure de lOSNR sont présentés. Nous démontrons aussi la possibilité de simultanément convertir en longueurs donde les données et l’étiquette. Les données à haut débit et l’étiquette à faible débit se retrouvent dans une seule bande de longueurs d’onde, et ils sont convertis ensemble avec une bonne efficacité. Notre démonstration se concentre sur les performances de conversion, donc les données et létiquette sont des signaux continus plutôt que de paquets optiques. Des mesures de taux derreur binaire ont été effectuées à la fois pour les données et pour létiquette. Nous proposons aussi lutilisation de QDMLL comme source de transmetteurs WDM pour deux applications différentes: unicast et multicast. Nous démontrons aussi sa compatibilité avec le format de transmission DQPSK à haut débit binaire. Nous évaluons la performance du DQPSK en terme de taux derreur binaire et comparons sa performance à celle dune source laser à cavité externe.Large scale computer networks require fast and reliable data links in order to support growing web applications. As the number of interconnected servers and storage media increases, optical communications and routing technologies become interesting because of the high speed and small footprint of optical fiber links. Furthermore, optical packet switched networks (OPSN) provide increased flexibility in network management. Future networks are envisaged to be wavelength dependent routing, therefore OPSN will exploit tunable wavelength converters (WC) to enable contention resolution, reduce wavelength blocking in wavelength routing and switching, and provide dynamic wavelength assignment. Optical transmitters based on multi-wavelength sources are presented as an attrative solution compared to a set of single distributed feedback lasers in terms of cost, footprint and power consumption. Wavelength converters should support high bit rates and a variety of signal formats, have fast setup time, moderate input power levels and high optical signal-to-noise ratio at the output. Several wavelength conversion technologies have been demonstrated. The use of four wave mixing (FWM) in semiconductor optical amplifiers (SOAs) provides low input power levels, acceptable conversion efficiency and the possibility of photonic integration. SOAs therefore offer excellent trade-offs compared to other solutions. To achieve wide wavelength coverage and integrability, we use a dual pump scheme exploiting four-wave mixing in semiconductor optical amplifiers. For phase stability, we use a quantum-dash mode-locked laser (QD-MLL) as a multi-wavelength source for the dual pumps, with tunability provided by the frequency selective filter. We investigate the proposed wavelength converter and compare its performance of wavelength conversion for different non-return-to-zero (NRZ) intensity and phase modulation formats at different bit rates (10 and 40 Gbit/s). Bit error rate, conversion efficiency and optical signal-to-noise ratio measurements are reported. We demonstrate the possibility of tightly packed payload and label wavelength conversion at very high data baud rate over wide tuning range with good conversion efficiency. Our demonstration concentrates on conversion performance, hence continuous payload and label signals were used without gating into packets. Bit error measurements for both payload and label were performed. We propose the use of QD-MLL as multi-wavelength source for WDM unicast and multicast applications and we investigated its compatibility with DQPSK transmission at high bit rate. We quantify DQPSK performance via bit error rate measurements and compare performance to that of an external cavity laser (ECL) source

    A survey on OFDM-based elastic core optical networking

    Get PDF
    Orthogonal frequency-division multiplexing (OFDM) is a modulation technology that has been widely adopted in many new and emerging broadband wireless and wireline communication systems. Due to its capability to transmit a high-speed data stream using multiple spectral-overlapped lower-speed subcarriers, OFDM technology offers superior advantages of high spectrum efficiency, robustness against inter-carrier and inter-symbol interference, adaptability to server channel conditions, etc. In recent years, there have been intensive studies on optical OFDM (O-OFDM) transmission technologies, and it is considered a promising technology for future ultra-high-speed optical transmission. Based on O-OFDM technology, a novel elastic optical network architecture with immense flexibility and scalability in spectrum allocation and data rate accommodation could be built to support diverse services and the rapid growth of Internet traffic in the future. In this paper, we present a comprehensive survey on OFDM-based elastic optical network technologies, including basic principles of OFDM, O-OFDM technologies, the architectures of OFDM-based elastic core optical networks, and related key enabling technologies. The main advantages and issues of OFDM-based elastic core optical networks that are under research are also discussed

    All-optical 2R regeneration with a vertical microcavity based saturable absorber

    No full text
    International audienceThis paper gives an overview of recent demonstrations of optical 2R regeneration achieved by vertical microcavity mirror based multiple-quantum-well Saturable Absorber (SA). The potential of the device to perform WDM regeneration is firstly demonstrated through the first pigtailed saturable absorber chip implemented with 8 independent fibres using a cost effective coupling technique. The cascadability and wavelength tunability assessment of this module associated to a power limiter fibre-based function has been experimentally demonstrated at 42.6 Gbit/s. Because this method of power limiting is not a suitable solution for all-optical multichannel 2R regeneration, a new SA structure allowing a power limiting function was proposed. We describe and characterize such a structure in this paper. This new SA opens the door to a complete passive all-optical 2R regeneration relying upon a single technology, as shown in this paper through the use of two SA: SA.0 for extinction ratio enhancement and SA.1 for power level equalization allowing receiver sensitivity (up to 3.5 dB) and Q factor (up to 1.4 dB) improvement for a RZ signal at 42.6 Gbit/s. The limitation of SA.1 when the regenerator must be cascaded a large number of times is also described, leading to the observation that SA.1 should be more suitable for phase encoded formats which are more spectrally efficient than OOK formats. A SA.1 used as a phase-preserving amplitude regenerator in a 42.6 Gbit/s RZ-DPSK transmission system is therefore assessed. A fibre launched power margin of 2 dB and a receiver sensitivity improvement of 5.5 dB are obtained. Finally, we use, for the first time an SA.1 as a phase-preserving amplitude regenerator of RZ DQPSK signals. The regenerator is assessed in a recirculating loop at 28 Gbaud. The system tolerance to nonlinear phase noise is enhanced by 3 dB and the distance improvement factor was 1.3 for a BER=10-4

    Modulação e conversão de formatos óticos avançados

    Get PDF
    Doutoramento em Engenharia ElectrotécnicaOver the years, the increased search and exchange of information lead to an increase of traffic intensity in todays optical communication networks. Coherent communications, using the amplitude and phase of the signal, reappears as one of the transmission techniques to increase the spectral efficiency and throughput of optical channels. In this context, this work present a study on format conversion of modulated signals using MZI-SOAs, based exclusively on all- optical techniques through wavelength conversion. This approach, when applied in interconnection nodes between optical networks with different bit rates and modulation formats, allow a better efficiency and scalability of the network. We start with an experimental characterization of the static and dynamic properties of the MZI-SOA. Then, we propose a semi-analytical model to describe the evolution of phase and amplitude at the output of the MZI-SOA. The model’s coefficients are obtained using a multi-objective genetic algorithm. We validate the model experimentally, by exploring the dependency of the optical signal with the operational parameters of the MZI-SOA. We also propose an all-optical technique for the conversion of amplitude modulation signals to a continuous phase modulation format. Finally, we study the potential of MZI-SOAs for the conversion of amplitude signals to QPSK and QAM signals. We show the dependency of the conversion process with the operational parameters deviation from the optimal values. The technique is experimentally validated for QPSK modulation.Nos últimos anos, a crescente procura e troca de informação tem levado ao aumento de tráfego nas redes de comunicação óticas atuais. As comunicações coerentes, com recurso à amplitude e fase do sinal, ressurgem como uma das técnicas de transmissão capazes de aumentar a eficiência espectral e o rendimento dos canais óticos. Nesse âmbito, este trabalho apresenta um estudo sobre a conversão de formatos de modulação de sinais, usando técnicas exclusivamente no domínio ótico, através de conversão de comprimento de onda, com base no MZI-SOA. Esta técnica, aplicada em nós óticos que interligam redes óticas com débitos binários distintos, permite uma maior escalabilidade e eficiência da rede. A tese começa por apresentar uma caracterização experimental detalhada das propriedades estáticas e dinâmicas do MZI-SOA. É depois proposto um modelo semi-analítico que descreve a evolução da amplitude e fase do sinal ótico à saída do MZI-SOA. Os coeficientes do modelo são obtidos recorrendo a um algoritmo genético multiobjectivo. O modelo é validado experimentalmente, explorando a dependência do sinal ótico com os parâmetros operacionais do MZI- SOA. Segue-se a proposta de uma técnica de conversão de formato de modulação de amplitude para modulação de fase contínua. Finalmente, é feito um estudo das potencialidades do MZI-SOA para conversão de formato de modulação de amplitude para modulação QPSK e QAM. Mostra-se a dependência da constelação do sinal com o desvio dos parâmetros operacionais, em torno do valor ótimo. A técnica é validada experimentalmente para modulação QPSK

    Advanced optical modulation and format conversion

    Get PDF
    Tese de Doutoramento em Engenharia Eletrotécnica apresentada à Universidade de Aveiro.Nos últimos anos, a crescente procura e troca de informação tem levado ao aumento de tráfego nas redes de comunicação óticas actuais. As comunicações coerentes, com recurso à amplitude e fase do sinal, ressurgem como uma das técnicas de transmissão capazes de aumentar a eficiência espectral e o rendimento dos canais óticos. Nesse âmbito, este trabalho apresenta um estudo sobre a conversão de formatos de modulação de sinais, usando técnicas exclusivamente no domínio ótico, através de conversão de comprimento de onda, com base no MZI-SOA. Esta técnica, aplicada em nós óticos que interligam redes óticas com débitos binàrios distintos, permite uma maior escalabilidade e eficiência da rede. A tese começa por apresentar uma caracterização experimental detalhada das propriedades estáticas e dinámicas do MZI-SOA. É depois proposto um modelo semi-analítico que descreve a evolução da amplitude e fase do sinal ótico à saída do MZI-SOA. Os coeficientes do modelo são obtidos recorrendo a um algoritmo genético multiobjectivo. O modelo é validado experimentalmente, explorando a dependência do sinal ótico com os parâmetros operacionais do MZISOA. Segue-se a proposta de uma técnica de conversão de formato de modulação de amplitude para modulação de fase contínua. Finalmente, é feito um estudo das potencialidades do MZI-SOA para conversão de formato de modulação de amplitude para modulação QPSK e QAM. Mostra-se a depedência da constelação do sinal com o desvio dos parâmetros operacionais, em torno do valor ótimo. A técnica é validada experimentalmente para modulação QPSK.ABSTRACT: Over the years, the increased search and exchange of information lead to an increase of traffic intensity in todays optical communication networks. Coherent communications, using the amplitude and phase of the signal, reappears as one of the transmission techniques to increase the spectral efficiency and throughput of optical channels. In this context, this work present a study on format conversion of modulated signals using MZI-SOAs, based exclusively on alloptical techniques through wavelength conversion. This approach, when applied in interconnection nodes between optical networks with different bit rates and modulation formats, allow a better efficiency and scalability of the network. We start with an experimental characterization of the static and dynamic properties of the MZI-SOA. Then, we propose a semi-analytical model to describe the evolution of phase and amplitude at the output of the MZI-SOA. The model’s coefficients are obtained using a multi-objective genetic algorithm. We validate the model experimentally, by exploring the dependency of the optical signal with the operational parameters of the MZI-SOA. We also propose an all-optical technique for the conversion of amplitude modulation signals to a continuous phase modulation format. Finally, we study the potential of MZI-SOAs for the conversion of amplitude signals to QPSK and QAM signals. We show the dependency of the conversion process with the operational parameters deviation from the optimal values. The technique is experimentally validated for QPSK modulation.Apoio financeiro da Fundação para a Ciência e Tecnologia — FCT através da bolsa SFRH / PROTEC / 50015 / 2009
    • …
    corecore