Pipeline-Based Power Reduction in FPGA Applications

This paper shows how temporal parallelism has an important role in the power dissipation reduction in the FPGA field. Glitches propagation is blocked by the flip-flops or registers in the pipeline. Several multiplication structures are implemented over modern FPGAs, StratixII and Virtex4, comparing their results with and without pipeline and hardware duplication

Design and power estimation of booth multiplier using different adder architectures

Modern IC Technology focuses on the design of ICs considering more area optimization and low power techniques. Multiplication is a heavily used arithmetic operation that figures prominently in signal processing and scientific applications. Multiplication is a very hardware intensive subject and we as users are mostly concerned with getting low-power,smaller area and higher speed.The most important concern in classic multiplication, mostly realized by K-cycles of shifting and adding, is to speed up underlying multi-operand addition of partial products. In this project we will present the design of Booth Multiplier with different adder architectures like Ripple Carry Adder & Carry Look Ahead Adder. The time delay, area and power have been analyzed for different adders. Also multipliers have been designed for both radix-2 and radix-4. Results will show the variation of area, speed and power for different designs. Also the power estimation method gives the deeper insight into power calculation and analysis. An approach have been suggested for peak power estimation

Power-Aware Design Methodologies for FPGA-Based Implementation of Video Processing Systems

The increasing capacity and capabilities of FPGA devices in recent years provide an attractive option for performance-hungry applications in the image and video processing domain. FPGA devices are often used as implementation platforms for image and video processing algorithms for real-time applications due to their programmable structure that can exploit inherent spatial and temporal parallelism. While performance and area remain as two main design criteria, power consumption has become an important design goal especially for mobile devices. Reduction in power consumption can be achieved by reducing the supply voltage, capacitances, clock frequency and switching activities in a circuit. Switching activities can be reduced by architectural optimization of the processing cores such as adders, multipliers, multiply and accumulators (MACS), etc. This dissertation research focuses on reducing the switching activities in digital circuits by considering data dependencies in bit level, word level and block level neighborhoods in a video frame. The bit level data neighborhood dependency consideration for power reduction is illustrated in the design of pipelined array, Booth and log-based multipliers. For an array multiplier, operands of the multipliers are partitioned into higher and lower parts so that the probability of the higher order parts being zero or one increases. The gating technique for the pipelined approach deactivates part(s) of the multiplier when the above special values are detected. For the Booth multiplier, the partitioning and gating technique is integrated into the Booth recoding scheme. In addition, a delay correction strategy is developed for the Booth multiplier to reduce the switching activities of the sign extension part in the partial products. A novel architecture design for the computation of log and inverse-log functions for the reduction of power consumption in arithmetic circuits is also presented. This also utilizes the proposed partitioning and gating technique for further dynamic power reduction by reducing the switching activities. The word level and block level data dependencies for reducing the dynamic power consumption are illustrated by presenting the design of a 2-D convolution architecture. Here the similarities of the neighboring pixels in window-based operations of image and video processing algorithms are considered for reduced switching activities. A partitioning and detection mechanism is developed to deactivate the parallel architecture for window-based operations if higher order parts of the pixel values are the same. A neighborhood dependent approach (NDA) is incorporated with different window buffering schemes. Consideration of the symmetry property in filter kernels is also applied with the NDA method for further reduction of switching activities. The proposed design methodologies are implemented and evaluated in a FPGA environment. It is observed that the dynamic power consumption in FPGA-based circuit implementations is significantly reduced in bit level, data level and block level architectures when compared to state-of-the-art design techniques. A specific application for the design of a real-time video processing system incorporating the proposed design methodologies for low power consumption is also presented. An image enhancement application is considered and the proposed partitioning and gating, and NDA methods are utilized in the design of the enhancement system. Experimental results show that the proposed multi-level power aware methodology achieves considerable power reduction. Research work is progressing In utilizing the data dependencies in subsequent frames in a video stream for the reduction of circuit switching activities and thereby the dynamic power consumption

A low-power transmission-gate-based 16-bit multiplier for digital hearing aids

The most widespread 16-bit multiplier architectures are compared in terms of area occupation, dissipated energy, and EDP (Energy-Delay Product) in view of low-power low-voltage signal processing for digital hearing aids and similar applications. Transistor-level simulations including back-annotated wire parasitics confirm that the propagation of glitches along uneven and re-convergent paths results in large unproductive node activity. Because of their shorter full-adder chains, Wallace-tree multipliers indeed dissipate less energy than the carry-save (CSM) and other traditional array multipliers (6.0µW/MHz versus 10.9µW/MHz and more for 0.25µm CMOS technology at 0.75V). By combining the Wallace-tree architecture with transmission gates (TGs), a new approach is proposed to improve the energy efficiency further (3.1µW/MHz), beyond recently published low-power architectures. Besides the reduction of the overall capacitance, minimum-sized transmission gate full-adders act as RC-low-pass filters that attenuate undesired switching. Finally, minimum size TGs increase the V dd to ground resistance, hence decreasing leakage dissipation (0.55nW versus 0.84nW in CSM and 0.94nW in Wallace

A Modified Architecture for Radix-4 Booth Multiplier with Adaptive Hold Logic

High speed digital multipliers are most efficiently used in many applications such as Fourier transform, discrete cosine transforms, and digital filtering. The throughput of the multipliers is based on speed of the multiplier, and then the entire performance of the circuit depends on it. The pMOS transistor in negative bias cause negative bias temperature instability (NBTI), which increases the threshold voltage of the transistor and reduces the multiplier speed. Similarly, the nMOS transistor in positive bias cause positive bias temperature instability (PBTI).These effects reduce the transistor speed and the system may fail due to timing violations. So here a new multiplier was designed with novel adaptive hold logic (AHL) using Radix-4 Modified Booth Multiplier. By using Radix-4 Modified Booth Encoding (MBE), we can reduce the number of partial products by half. Modified booth multiplier helps to provide higher throughput with low power consumption. This can adjust the AHL circuit to reduce the performance degradation. The expected result will be reduce threshold voltage, increase throughput and speed and also reduce power. This modified multiplier design is coded by Verilog and simulated using Xilinx ISE 12.1 and implemented in Spartan 3E FPGA kit

Designing Techniques for Low Power Multipliers: A Review

Multipliers are fundamental building blocks of all DSP applications. Design of low power, high speed multipliers is carried out to reduce latency and power dissipation of a processing system because switching and critical computations of a multiplier are high, compared to other data path units of a processing architecture. In recent years, a few techniques have been developed that enhance power for accuracy by removing or rearranging multiplier?s blocks. Choosing the proper technique and implementing it can make a big difference in the power dissipation. This is important for low-power battery-operated devices, where longer battery life could be preferred to higher output accuracy. To enhance speed many changes have been made over the existing booth algorithm. In this paper, a simplified comparative study has been presented among SPST based Wallace tree multipliers and other low power multiplier techniques