An object-based approach for mapping forest structural types based on low-density LiDAR and multispectral imagery

[EN] Mapping forest structure variables provides important information for the estimation of forest biomass, carbon stocks, pasture suitability or for wildfire risk prevention and control. The optimization of the prediction models of these variables requires an adequate stratification of the forest landscape in order to create specific models for each structural type or strata. This paper aims to propose and validate the use of an object-oriented classification methodology based on low-density LiDAR data (0.5 m−2) available at national level, WorldView-2 and Sentinel-2 multispectral imagery to categorize Mediterranean forests in generic structural types. After preprocessing the data sets, the area was segmented using a multiresolution algorithm, features describing 3D vertical structure were extracted from LiDAR data and spectral and texture features from satellite images. Objects were classified after feature selection in the following structural classes: grasslands, shrubs, forest (without shrubs), mixed forest (trees and shrubs) and dense young forest. Four classification algorithms (C4.5 decision trees, random forest, k-nearest neighbour and support vector machine) were evaluated using cross-validation techniques. The results show that the integration of low-density LiDAR and multispectral imagery provide a set of complementary features that improve the results (90.75% overall accuracy), and the object-oriented classification techniques are efficient for stratification of Mediterranean forest areas in structural- and fuel-related categories. Further work will be focused on the creation and validation of a different prediction model adapted to the various strata.This work was supported by the Spanish Ministerio de Economia y Competitividad and FEDER under [grant number CGL2013-46387-C2-1-R]; Fondo de Garantia Juvenil under [contract number PEJ-2014-A-45358].Ruiz Fernández, LÁ.; Recio Recio, JA.; Crespo-Peremarch, P.; Sapena, M. (2018). An object-based approach for mapping forest structural types based on low-density LiDAR and multispectral imagery. Geocarto International. 33(5):443-457. https://doi.org/10.1080/10106049.2016.1265595S44345733

Mapping urban tree species in a tropical environment using airborne multispectral and LiDAR data

Dissertation submitted in partial fulfilment of the requirements for the Degree of Master of Science in Geospatial TechnologiesAccurate and up-to-date urban tree inventory is an essential resource for the development of strategies towards sustainable urban planning, as well as for effective management and preservation of biodiversity. Trees contribute to thermal comfort within urban centers by lessening heat island effect and have a direct impact in the reduction of air pollution. However, mapping individual trees species normally involves time-consuming field work over large areas or image interpretation performed by specialists. The integration of airborne LiDAR data with high-spatial resolution and multispectral aerial image is an alternative and effective approach to differentiate tree species at the individual crown level. This thesis aims to investigate the potential of such remotely sensed data to discriminate 5 common urban tree species using traditional Machine Learning classifiers (Random Forest, Support Vector Machine, and k-Nearest Neighbors) in the tropical environment of Salvador, Brazil. Vegetation indices and texture information were extracted from multispectral imagery, and LiDAR-derived variables for tree crowns, were tested separately and combined to perform tree species classification applying three different classifiers. Random Forest outperformed the other two classifiers, reaching overall accuracy of 82.5% when using combined multispectral and LiDAR data. The results indicate that (1) given the similarity in spectral signature, multispectral data alone is not sufficient to distinguish tropical tree species (only k-NN classifier could detect all species); (2) height values and intensity of crown returns points were the most relevant LiDAR features, combination of both datasets improved accuracy up to 20%; (3) generation of canopy height model derived from LiDAR point cloud is an effective method to delineate individual tree crowns in a semi-automatic approach

Exploring issues of balanced versus imbalanced samples in mapping grass community in the telperion reserve using high resolution images and selected machine learning algorithms

ABSTRACT Accurate vegetation mapping is essential for a number of reasons, one of which is for conservation purposes. The main objective of this research was to map different grass communities in the game reserve using RapidEye and Sentinel-2 MSI images and machine learning classifiers [support vector machine (SVM) and Random forest (RF)] to test the impacts of balanced and imbalance training data on the performance and the accuracy of Support Vector Machine and Random forest in mapping the grass communities and test the sensitivities of pixel resolution to balanced and imbalance training data in image classification. The imbalanced and balanced data sets were obtained through field data collection. The results show RF and SVM are producing a high overall accuracy for Sentinel-2 imagery for both the balanced and imbalanced data set. The RF classifier has yielded an overall accuracy of 79.45% and kappa of 74.38% and an overall accuracy of 76.19% and kappa of 73.21% using imbalanced and balanced training data respectively. The SVM classifier yielded an overall accuracy of 82.54% and kappa of 80.36% and an overall accuracy of 82.21% and a kappa of 78.33% using imbalanced and balanced training data respectively. For the RapidEye imagery, RF and SVM algorithm produced overall accuracy affected by a balanced data set leading to reduced accuracy. The RF algorithm had an overall accuracy that dropped by 6% (from 63.24% to 57.94%) while the SVM dropped by 7% (from 57.31% to 50.79%). The results thereby show that the imbalanced data set is a better option when looking at the image classification of vegetation species than the balanced data set. The study recommends the implementation of ways of handling misclassification among the different grass species to improve classification for future research. Further research can be carried out on other types of high resolution multispectral imagery using different advanced algorithms on different training size samples.EM201

Multi-Decadal Changes in Mangrove Extent, Age and Species in the Red River Estuaries of Viet Nam

This research investigated the performance of four different machine learning supervised image classifiers: artificial neural network (ANN), decision tree (DT), random forest (RF), and support vector machine (SVM) using SPOT-7 and Sentinel-1 images to classify mangrove age and species in 2019 in a Red River estuary, typical of others found in northern Viet Nam. The four classifiers were chosen because they are considered to have high accuracy, however, their use in mangrove age and species classifications has thus far been limited. A time-series of Landsat images from 1975 to 2019 was used to map mangrove extent changes using the unsupervised classification method of iterative self-organizing data analysis technique (ISODATA) and a comparison with accuracy of K-means classification, which found that mangrove extent has increased, despite a fall in the 1980s, indicating the success of mangrove plantation and forest protection efforts by local people in the study area. To evaluate the supervised image classifiers, 183 in situ training plots were assessed, 70% of them were used to train the supervised algorithms, with 30% of them employed to validate the results. In order to improve mangrove species separations, Gram–Schmidt and principal component analysis image fusion techniques were applied to generate better quality images. All supervised and unsupervised (2019) results of mangrove age, species, and extent were mapped and accuracy was evaluated. Confusion matrices were calculated showing that the classified layers agreed with the ground-truth data where most producer and user accuracies were greater than 80%. The overall accuracy and Kappa coefficients (around 0.9) indicated that the image classifications were very good. The test showed that SVM was the most accurate, followed by DT, ANN, and RF in this case study. The changes in mangrove extent identified in this study and the methods tested for using remotely sensed data will be valuable to monitoring and evaluation assessments of mangrove plantation projects

Mapping Prosopis glandulosa (mesquite) invasion in the arid environment of South African using remote sensing techniques

A dissertation submitted to the School of Geography, Archaeology and Environmental Studies, Faculty of Science, University of the Witwatersrand, Johannesburg, in fulfilment of requirements for the degree of Master of Science in Environmental Sciences. Johannesburg, March 2016.Mapping Prosopis glandulosa (mesquite) invasion in the arid environment of South Africa using remote sensing techniques Mureriwa, Nyasha Abstract Decades after the first introduction of the Prosopis spp. (mesquite) to South Africa in the late 1800s for its benefits, the invasive nature of the species became apparent as its spread in regions of South Africa resulting in devastating effects to biodiversity, ecosystems and the socio-economic wellbeing of affected regions. Various control and management practices that include biological, physical, chemical and integrated methods have been tested with minimal success as compared to the rapid spread of the species. From previous studies, it has been noted that one of the reasons for the low success rates in mesquite control and management is a lack of sufficient information on the species invasion dynamic in relation to its very similar co-existing species. In order to bridge this gap in knowledge, vegetation species mapping techniques that use remote sensing methods need to be tested for the monitoring, detection and mapping of the species spread. Unlike traditional field survey methods, remote sensing techniques are better at monitoring vegetation as they can cover very large areas and are time-effective and cost-effective. Thus, the aim of this research was to examine the possibility of mapping and spectrally discriminating Prosopis glandulosa from its native co-existing species in semi-arid parts of South Africa using remote sensing methods. The specific objectives of the study were to investigate the spectral separability between Prosopis glandulosa and its co-existing species using field spectral data as well as to upscale the results to different satellites resolutions. Two machine learning algorithms (Random Forest (RF) and Support Vector Machines (SVM)) were also tested in the mapping processes. The first chapter of the study evaluated the spectral discrimination of Prosopis glandulosa from three other species (Acacia karoo, Acacia mellifera and Ziziphus mucronata) in the study area using in-situ spectroscopy in conjunction with the newly developed guided regularized random forest (GRRF) algorithm in identifying key wavelengths for multiclass classification. The GRRF algorithm was used as a method of reducing the problem of high dimensionality associated with hyperspectral data. Results showed that there was an increase in the accuracy of discrimination between the four species when the full set of 1825 wavelengths was used in classification (79.19%) as compared to the classification used by the 11 key wavelengths identified by GRRF (88.59%). Results obtained from the second chapter showed that it is possible to spatially discriminate mesquite from its co-existing acacia species and other general land-cover types at a 2 m resolution with overall accuracies of 86.59% for RF classification and 85.98% for SVM classification. The last part of the study tested the use of the more cost effective SPOT-6 imagery and the RF and SVM algorithms in mapping Prosopis glandulosa invasion and its co-existing indigenous species. The 6 m resolution analysis obtained accuracies of 78.46% for RF and 77.62% for SVM. Overall it was concluded that spatial and spectral discrimination of Prosopis glandulosa from its native co-existing species in semi-arid South Africa was possible with high accuracies through the use of (i) two high resolution, new generation sensors namely, WorldView-2 and SPOT-6; (ii) two robust classification algorithms specifically, RF and SVM and (iii) the newly developed GRRF algorithm for variable selection and reducing the high dimensionality problem associated with hyperspectral data. Some recommendations for future studies include the replication of this study on a larger scale in different invaded areas across the country as well as testing the robustness of the RF and SVM classifiers by making use of other machine learning algorithms and classification methods in species discrimination. Keywords: Prosopis glandulosa, field spectroscopy, cost effectiveness, Guided Regularised Random Forest, Support Vector Machines, Worldview-2, Spot-

Exploring the utility of the additional WorldView-2 bands and support vector machines in mapping land use/land cover in a fragmented ecosystem, South Africa

Land use/land cover (LULC) classification is a key research field in environmental applications of remote  sensing on the earthfs surface. The advent of new high resolution multispectral sensors with unique bands has  provided an opportunity to map the spatial distribution of detailed LULC classes over a large fragmented area. The objectives of the present study were: (1) to map LULC classes using multispectral WorldView-2 (WV-2) data and SVM in a fragmented ecosystem; and (2) to compare the accuracy of three WV-2 spectral data sets in distinguishing amongst various LULC classes in a fragmented ecosystem. WV-2 image was spectrally  resized to its four standard bands (SB: blue, green, red and near infrared-1) and four strategically located  bands (AB: coastal blue, yellow, red edge and near infrared-2). WV-2 image (8bands: 8B) together with SB and AB subsets were used to classify LULC using support vector machines. Overall classification accuracies of 78.0% (total disagreement = 22.0%) for 8B, 51.0% (total disagreement = 49.0%) for SB, and 64.0% (total disagreement = 36.0%) for AB were achieved. There were significant differences between the performance of all WV-2 subset pair comparisons (8B versus SB, 8B versus AB and SB versus AB) as demonstrated by the results of McNemarfs test (Z score .1.96). This study concludes that WV-2 multispectral data and the SVM classifier have the potential to map LULC classes in a fragmented ecosystem. The study also offers relatively accurate information that is important for the indigenous forest managers in KwaZulu-Natal, South Africa for making informed decisions regarding conservation and management of LULC patterns.Keywords: land use/cover classification, fragmented ecosystem, WorldView-2, support vector  machines